TI TSV321RILT

TSV321-TSV358-TSV324
General purpose input/output rail-to-rail
low power operational amplifiers
Features
■
Operating range VCC = 2.5 V to 6 V
■
Rail-to-rail input and output
■
Extended Vicm (VDD - 0.2 V to VCC + 0.2 V)
■
Capable of driving a 32 Ω load resistor
■
High stability: 500 pF
■
Available in SOT23-5 micropackage
■
Operating temperature range: -40° C, +125° C
Pin connections (top view)
TSV321RILT (SOT23-5)
Output
1
VDD
2
Non Inverting Input
3
5
VCC
4
Inverting Input
TSV321ID-TSV321IDT (SO-8)
Applications
■
Battery-powered applications
■
Audio driver (headphone driver)
■
Sensor signal conditioning
■
Laptop/notebook computers
1
Inverting Input
2
Non Inverting Input
3
VDD
4
8
N.C.
_
7
VCC
+
6
Output
5
N.C.
TSV358IST-TSV358ID-TSV358IDT-TSV358IPT
(SO-8, miniSO-8, TSSOP8)
Description
The TSV358 and TSV324 (dual and quad) are
low voltage versions of the LM358 and LM324
commodity operational amplifiers. The TSV321 is
the single version. The TSV321/358/324 are able
to operate with voltages as low as 2.5 V and
feature both I/O rail-to-rail.
Output 1
1
Inverting Input 1
2
_
Non Inverting Input 1
3
+
VDD
The common mode input voltage extends 200 mV
beyond the supply voltages at 25° C while the
output voltage swing is within 100 mV of each rail
with a 600 Ω load resistor. At VCC = 3 V, these
devices offer 1.3 MHz of gain-bandwidth product
and provide high output current capability with a
typical value of 80 mA.
4
8
VCC
7
Output 2
_
6
Inverting Input 2
+
5
Non Inverting Input 2
TSV324ID-TSV324IDT-TSV324IPT
(SO-14, TSSOP14)
Output 1
These features make the TSV3xx family ideal for
active filters, general purpose low-voltage
applications, and general purpose portable
devices.
February 2008
N.C.
Rev 5
14 Output 4
1
Inverting Input 1
2
_
Non Inverting Input 1
3
+
_
13 Inverting Input 4
+
12 Non Inverting Input 4
+
_
VCC
4
11 VDD
Non Inverting Input 2
5
10 Non Inverting Input 3
Inverting Input 2
6
Output 2
7
+
_
9
Inverting Input 3
8
Output 3
1/17
www.st.com
17
Absolute maximum ratings and operating conditions
1
TSV321-TSV358-TSV324
Absolute maximum ratings and operating conditions
Table 1.
Absolute maximum ratings
Symbol
VCC
Parameter
Unit
7
V
±1
V
VDD-0.3 to VCC +0.3
V
-65 to +150
°C
150
°C
Supply voltage (1)
Vid
Differential input voltage
Vin
Input voltage
Tstg
Storage temperature
Tj
Value
(2)
Maximum junction temperature
(3)
Rthja
Thermal resistance junction to ambient
SOT23-5
SO-8
SO-14
TSSOP8
TSSOP14
MiniSO-8
Rthjc
Thermal resistance junction to case (3)
SOT23-5
SO-8
SO-14
TSSOP8
TSSOP14
MiniSO-8
81
40
31
37
32
39
HBM: human body model(4)
2
kV
200
V
1.5
kV
Latch-up immunity
200
mA
Lead temperature (soldering, 10s)
250
ESD
MM: machine model
(5)
CDM: charged device model
Output short-circuit duration
°C/W
250
125
105
120
100
190
(6)
See note
°C/W
°C
(7)
1. All voltages values, except differential voltage are with respect to network terminal.
2. Differential voltages are the non-inverting input terminal with respect to the inverting input terminal. If
Vid > ±1 V, the maximum input current must not exceed ±1 mA. When Vid > ±1 V, an input series resistor
must be added to limit input current.
3. Short-circuits can cause excessive heating and destructive dissipation. Rth are typical values.
4. Human body model: 100 pF discharged through a 1.5 kΩ resistor between two pins of the device, done for
all couples of pin combinations with other pins floating.
5. Machine model: a 200 pF capacitor is charged to the specified voltage, then discharged directly between
two pins of the device with no external series resistor (internal resistor < 5 Ω), done for all couples of pin
combinations with other pins floating.
6. Charged device model: all pins plus package are charged together to the specified voltage and then
discharged directly to the ground.
7. Short-circuits from the output to VCCcan cause excessive heating. The maximum output current is
approximately 80 mA, independent of the magnitude of VCC. Destructive dissipation can result from
simultaneous short-circuits on all amplifiers.
2/17
TSV321-TSV358-TSV324
Table 2.
Absolute maximum ratings and operating conditions
Operating conditions
Symbol
Parameter
VCC
Supply voltage
Vicm
Common mode input voltage range
Tamb = 25°C, 2.5 ≤ VCC ≤ 6V
Tmin < Tamb < Tmax, 2.5 ≤ VCC ≤ 5.5V
Toper
Operating free air temperature range
Value
Unit
2.5 to 6
V
VDD - 0.2 to VCC + 0.2
VDD to VCC
V
-40 to + 125
°C
3/17
Electrical characteristics
TSV321-TSV358-TSV324
2
Electrical characteristics
Table 3.
Electrical characteristics at VCC = +3V, VDD = 0V, RL, CL connected to VCC/2,
and Tamb = 25°C (unless otherwise specified)
Symbol
Vio
ΔVio
Parameter
Input offset voltage
Test conditions
Min.
Vicm = Vout = VCC /2
TSV321/358/324
Tmin ≤ Tamb ≤ Tmax
TSV321A/358A/324A
Tmin ≤ Tamb ≤ Tmax
Typ.
Max.
0.2
3
6
1
3
0.1
Input offset voltage drift
2
(1)
Unit
mV
µV/°C
Iio
Input offset current
Vicm = Vout = VCC /2
Tmin ≤ Tamb ≤ Tmax
Iib
Input bias current
Vicm = Vout = VCC /2 (1)
Tmin ≤ Tamb ≤ Tmax
Common mode rejection ratio
20 log (ΔVic/ΔVio)
0 ≤ Vicm ≤ VCC, Vout = VCC /2
60
80
dB
Large signal voltage gain
Vout = 0.5V to 2.5V
RL = 2kΩ
RL = 600Ω
80
74
92
95
dB
High level output voltage
Vid = 100mV
RL = 2kΩ
RL = 600Ω
Tmin ≤ Tamb ≤ Tmax, RL = 2kΩ
Tmin ≤ Tamb ≤ Tmax, RL = 600Ω
2.82
2.80
2.82
2.80
2.95
2.95
Low level output voltage
Vid = -100mV
RL = 2kΩ
RL = 600Ω
Tmin ≤ Tamb ≤ Tmax, RL = 2kΩ
Tmin ≤ Tamb ≤ Tmax, RL = 600Ω
Output source current
Vid = 100mV, VO = VDD
20
80
Output sink current
Vid = -100mV, VO = VCC
20
80
Supply current (per amplifier)
AVCL = 1, no load
Tmin ≤ Tamb ≤ Tmax
Gain bandwidth product
RL = 10kΩ, CL = 100pF, f = 100kHz
SR
Slew rate
RL = 10kΩ, CL = 100pF
φm
Phase margin
CL = 100pF
en
Input voltage noise
CMR
Avd
VOH
VOL
Io
ICC
GBP
THD
Total harmonic distortion
1. Maximum values include unavoidable inaccuracies of the industrial tests.
4/17
3
30
60
nA
40
125
150
nA
88
115
V
120
160
120
160
mV
mA
420
650
690
µA
1
1.3
MHz
0.42
0.6
V/µs
53
Degrees
27
nV/√Hz
0.01
%
TSV321-TSV358-TSV324
Table 4.
Electrical characteristics at VCC = +5V, VDD = 0V, RL, CL connected to VCC/2,
and Tamb = 25°C (unless otherwise specified)
Symbol
Vio
ΔVio
Electrical characteristics
Parameter
Input offset voltage
Conditions
Min.
Vicm = Vout = VCC /2
TSV321/358/324
Tmin ≤ Tamb ≤ Tmax
TSV321A/358A/324A
Tmin ≤ Tamb ≤ Tmax
Typ.
Max.
0.2
3
6
1
3
0.1
Input offset voltage drift
2
(1)
Unit
mV
µV/°C
Iio
Input offset current
Vicm = Vout = VCC /2
Tmin ≤ Tamb ≤ Tmax
Iib
Input bias current
Vicm = Vout = VCC /2 (1)
Tmin ≤ Tamb ≤ Tmax
CMR
Common mode rejection ratio
20 log (ΔVic/ΔVio)
0 ≤ Vicm ≤ VCC, Vout = VCC /2
65
85
dB
SVR
Supply voltage rejection ratio
20 log (ΔVCC/ΔVio)
VCC = 2.5 to 5V
70
90
dB
Avd
Large signal voltage gain
Vout = 0.5V to 4.5V
RL = 2kΩ
RL = 600Ω
83
77
92
85
dB
High level output voltage
Vid = 100mV
RL = 2kΩ
RL = 600Ω
Tmin ≤ Tamb ≤ Tmax, RL = 2kΩ
Tmin ≤ Tamb ≤ Tmax, RL = 600Ω
4.80
4.75
4.80
4.75
4.95
4.90
Low level output voltage
Vid = -100mV
RL = 2kΩ
RL = 600Ω
Tmin ≤ Tamb ≤ Tmax, RL = 2kΩ
Tmin ≤ Tamb ≤ Tmax, RL = 600Ω
Output source current
Vid = 100mV, VO = VDD
20
80
Output sink current
Vid = -100mV, VO = VCC
20
80
Supply current (per amplifier)
AVCL = 1, no load
Tmin ≤ Tamb ≤ Tmax
Gain bandwidth product
RL = 10kΩ, CL = 100pF, f = 100kHz
SR
Slew rate
RL = 10kΩ, CL = 100pF
φm
Phase margin
CL = 100pF
en
Input voltage noise
VOH
VOL
Io
ICC
GBP
THD
Total harmonic distortion
3
30
60
nA
70
130
150
nA
88
115
V
130
188
130
188
mV
mA
500
835
875
µA
1
1.4
MHz
0.42
0.6
V/µs
55
Degrees
27
nV/√Hz
0.01
%
1. Maximum values include unavoidable inaccuracies of the industrial tests.
5/17
Electrical characteristics
Figure 1.
TSV321-TSV358-TSV324
Supply current/amplifier vs. supply Figure 2.
voltage
600
550
500
500
Supply current/amplifier vs.
temperature
Supply Current (µA)
Supply Current (µA)
Vcc = 5V
400
Tamb = 25°C
300
200
400
350
300
100
250
-40
0
0
2
Figure 3.
4
Supply Voltage (V)
6
8
-20
0
20
40
60
80
100
120
140
Temperature (°C)
Output power vs. supply voltage
Figure 4.
Input offset voltage drift vs.
temperature
200
60
RL = 32 ohms
10% distortion
150
Input Voltage Drift (µV)
50
Output Power (mW)
Vcc = 3V
450
1% distortion
40
30
0.1% distortion
20
100
Vcc = 3V
50
Vcc = 5V
0
-50
10
-100
0
1
2
3
4
5
-150
-40
6
-20
0
Supply Voltage (V)
Figure 5.
40
60
80
100
120
140
Temperature (°C)
Input bias current vs. temperature
Figure 6.
Open loop gain vs. temperature at
VCC = 5 V
110
10.0
Vcc = 3V
Vicm = 1.5V
0.0
-10.0
-20.0
RL = 2 kOhms
Vcc = 5V
Vicm = 2.5V
Open Loop Gain (dB)
Input bias current (nA)
20
100
90
RL = 600 ohms
80
-30.0
-40.0
-40 -20
6/17
0
20
40 60
80 100
Temperature (°C)
120 140
70
-40
-20
0
20
40
60
80
Temperature (°C)
100
120
140
TSV321-TSV358-TSV324
Figure 7.
Electrical characteristics
Open loop gain vs. temperature at
VCC = 3 V
Figure 8.
110
Voltage Referenced to VCC (mV)
110
Vcc = 3V
Vicm = 1.5V
Open Loop Gain (dB)
High level output voltage vs.
temperature
RL = 2 kOhms
100
90
RL = 600 Ohms
80
70
-40
-20
0
20
40
60
80
100
120
RL = 600 ohms
90
80
Vcc = 3V
70
60
50
40
-40
140
-20
0
20
Low level output voltage vs.
temperature
80
100
120
140
100
RL = 600 ohms
100
Isink
90
Output Current (mA)
Voltage Referenced to Gnd (mV)
60
Figure 10. Output current vs. temperature at
VCC = 5 V
110
Vcc = 5V
80
Vcc = 3V
70
60
50
Vcc = 5V
Vid = 1V
0
Isource
-50
50
40
-40
-100
-20
0
20
40
60
80
100
120
140
-40
-20
0
20
Temperature (°C)
40
60
80
100
120
140
Temperature (°C)
Figure 11. Output current vs. temperature at
VCC = 3 V
Figure 12. Output current vs. output voltage at
VCC = 5 V
100
100
T = -40 °C
Isink
50
Output Current (mA)
Output Current (mA)
40
Temperature (°C)
Temperature (°C)
Figure 9.
Vcc = 5V
100
Vcc = 3V
Vid = 1V
0
Isource
-50
sink
50
T = 125 °C
Vcc = 5V
Vid = 0.1V
Vicm = 2.5V
0
T = 125 °C
T = 25 °C
-50
T = -40 °C
-100
T = 25 °C
source
-100
-40
-20
0
20
40
60
80
Temperature (°C)
100
120
140
0.0
1.0
2.0
3.0
Output Voltage (V)
4.0
5.0
7/17
Electrical characteristics
TSV321-TSV358-TSV324
Figure 13. Output current vs. output voltage at Figure 14. Gain and phase vs. frequency at
VCC = 3 V
VCC = 5 V
100
70
T = -40 °C
T = 25 °C
60
sink
50
50
Gain (dB)
T = 125 °C
Vcc = 3V
Vid = 0.1V
Vicm = 1.5V
0
40
160
140
120
gain
phase
30
100
Phase (°)
Output Current (mA)
180
RL = 10K
CL = 100 pF
Vcc = 5V
T = 125 °C
T = 25 °C
-50
T = -40 °C
80
10
60
source
0
1E+3
-100
0.0
20
0.5
1.0
1.5
2.0
2.5
3.0
3.5
40
1E+4
1E+5
1E+6
Frequency (Hz)
Output Voltage (V)
v
Figure 15. Gain and phase vs. frequency at
VCC = 3 V
RL = 10K
CL = 100 pF
Vcc = 3V
60
50
40
160
140
120
gain
30
100
phase
20
80
10
60
0
1E+3
0.70
Phase (°)
Gain (dB)
0.75
180
-20
0
20
40
60
80
100
120
140
Figure 18. Distortion vs. frequency
positive Slew Rate
Vcc = 3V
gain = +1
Vin = 1 to 2V
RL = 10kohm
CL = 100 pF
0.125
Distortion (%)
Slew Rate (V/µs)
0.50
Temperature (°C)
negative Slew Rate
0.50
0.45
Vcc = 3V
Vout = 1Vpp
RL = 32 ohms
gain = -1
0.100
0.075
0.050
0.025
0.40
-20
0
20
40
60
80
Temperature (°C)
8/17
negative Slew Rate
0.55
0.35
-40
1E+6
0.55
0.35
-40
0.60
0.150
0.70
0.60
positive Slew Rate
0.40
40
1E+4
1E+5
Frequency (Hz)
0.65
Vcc = 5V
gain = +1
Vin = 2 to 3V
RL = 10kohms
CL = 100 pF
0.45
Figure 17. Slew rate vs. temperature at
VCC = 3 V
0.65
Slew Rate (V/µs)
70
Figure 16. Slew rate vs. temperature at
VCC = 5 V
100
120
140
0.000
1E+1
1E+2
1E+3
Frequency (Hz)
1E+4
1E+5
TSV321-TSV358-TSV324
3
Package information
Package information
In order to meet environmental requirements, STMicroelectronics offers these devices in
ECOPACK® packages. These packages have a lead-free second level interconnect. The
category of second level interconnect is marked on the package and on the inner box label,
in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering
conditions are also marked on the inner box label. ECOPACK is an STMicroelectronics
trademark. ECOPACK specifications are available at: www.st.com.
3.1
SOT23-5 package information
Figure 19. SOT23-5 package mechanical drawing
Table 5.
SOT23-5 package mechanical data
Dimensions
Ref.
Millimeters
Min.
Typ.
Mils
Max.
Min.
Typ.
Max.
A
0.90
1.45
35.4
57.1
A1
0.00
0.15
0.00
5.9
A2
0.90
1.30
35.4
51.2
b
0.35
0.50
13.7
19.7
C
0.09
0.20
3.5
7.8
D
2.80
3.00
110.2
118.1
E
2.60
3.00
102.3
118.1
E1
1.50
1.75
59.0
68.8
e
0.95
37.4
e1
1.9
74.8
L
0.35
0.55
13.7
21.6
9/17
Package information
3.2
TSV321-TSV358-TSV324
SO-8 package information
Figure 20. SO-8 package mechanical drawing
Table 6.
SO-8 package mechanical data
Dimensions
Ref.
Millimeters
Min.
Typ.
A
Max.
Min.
Typ.
1.75
0.25
Max.
0.069
A1
0.10
A2
1.25
b
0.28
0.48
0.011
0.019
c
0.17
0.23
0.007
0.010
D
4.80
4.90
5.00
0.189
0.193
0.197
E
5.80
6.00
6.20
0.228
0.236
0.244
E1
3.80
3.90
4.00
0.150
0.154
0.157
e
0.004
0.010
0.049
1.27
0.050
h
0.25
0.50
0.010
0.020
L
0.40
1.27
0.016
0.050
k
1°
8°
1°
8°
ccc
10/17
Inches
0.10
0.004
TSV321-TSV358-TSV324
3.3
Package information
TSSOP8 package information
Figure 21. TSSOP8 package mechanical drawing
Table 7.
TSSOP8 package mechanical data
Dimensions
Ref.
Millimeters
Min.
Typ.
A
Inches
Max.
Min.
Typ.
1.2
A1
0.05
A2
0.80
b
Max.
0.047
0.15
0.002
1.05
0.031
0.19
0.30
0.007
0.012
c
0.09
0.20
0.004
0.008
D
2.90
3.00
3.10
0.114
0.118
0.122
E
6.20
6.40
6.60
0.244
0.252
0.260
E1
4.30
4.40
4.50
0.169
0.173
0.177
e
1.00
0.65
k
0°
L
0.45
0.60
0.006
0.039
0.041
0.0256
8°
0°
0.75
0.018
8°
0.024
L1
1
0.039
aaa
0.1
0.004
0.030
11/17
Package information
3.4
TSV321-TSV358-TSV324
MiniSO-8 package information
Figure 22. MiniSO-8 package mechanical drawing
Table 8.
MiniSO-8 package mechanical data
Dimensions
Ref.
Millimeters
Min.
Typ.
A
Max.
Min.
Typ.
1.1
A1
0
A2
0.75
b
Max.
0.043
0.15
0
0.95
0.030
0.22
0.40
0.009
0.016
c
0.08
0.23
0.003
0.009
D
2.80
3.00
3.20
0.11
0.118
0.126
E
4.65
4.90
5.15
0.183
0.193
0.203
E1
2.80
3.00
3.10
0.11
0.118
0.122
e
L
0.85
0.65
0.40
0.60
0.006
0.033
0.80
0.016
0.024
0.95
0.037
L2
0.25
0.010
ccc
0°
0.037
0.026
L1
k
12/17
Inches
8°
0.10
0°
0.031
8°
0.004
TSV321-TSV358-TSV324
3.5
Package information
SO-14 package information
Figure 23. SO-14 package mechanical drawing
Table 9.
SO-14 package mechanical data
Dimensions
Ref.
Millimeters
Min.
Typ.
A
a1
Inches
Max.
Min.
Typ.
1.75
0.1
0.2
a2
Max.
0.068
0.003
0.007
1.65
0.064
b
0.35
0.46
0.013
0.018
b1
0.19
0.25
0.007
0.010
C
0.5
0.019
c1
45° (typ.)
D
8.55
8.75
0.336
0.344
E
5.8
6.2
0.228
0.244
e
1.27
0.050
e3
7.62
0.300
F
3.8
4.0
0.149
0.157
G
4.6
5.3
0.181
0.208
L
0.5
1.27
0.019
0.050
M
S
0.68
0.026
8° (max.)
13/17
Package information
3.6
TSV321-TSV358-TSV324
TSSOP14 package information
Figure 24. TSSOP14 package mechanical drawing
A
A2
A1
K
e
b
L
c
E
D
E1
PIN 1 IDENTIFICATION
1
Figure 25. TSSOP14 package mechanical data
Dimensions
Ref.
Millimeters
Min.
Typ.
A
Max.
Min.
Typ.
1.2
A1
0.05
A2
0.8
b
Max.
0.047
0.15
0.002
0.004
0.006
1.05
0.031
0.039
0.041
0.19
0.30
0.007
0.012
c
0.09
0.20
0.004
0.0089
D
4.9
5
5.1
0.193
0.197
0.201
E
6.2
6.4
6.6
0.244
0.252
0.260
E1
4.3
4.4
4.48
0.169
0.173
0.176
e
14/17
Inches
1
0.65 BSC
K
0°
L1
0.45
0.60
0.0256 BSC
8°
0°
0.75
0.018
8°
0.024
0.030
TSV321-TSV358-TSV324
Ordering information
4
Ordering information
Table 10.
Order codes
Temperature
range
Order code
Package
Packaging
SOT23-5
Tape & reel
TSV321RILT
Marking
K174
TSV321RAILT
K178
(1)
TSV321RIYLT
TSV321RAIYLT(1)
TSV321ID/IDT
TSV321IYD/IYDT(1)
TSV321AID/IDT
Tape & reel
SO-8
Tube or
tape & reel
V321ID
SO-8
(Automotive grade level)
Tube or
tape & reel
V321Y
SO-8
Tube or
tape & reel
V321AI
SO-8
Tube or
tape & reel
TSV358ID/IDT
TSV358AID/IDT
TSV358IYD/IYDT
(1)
(1)
TSV358AIYD/AIYDT
TSV358IPT
-40°C to +125°C
TSV358AIPT
(1)
TSV358IYPT
TSV358AIYPT(1)
K179
SOT23-5
(Automotive grade level)
K187
SO-8
(Automotive grade level)
Tube or
tape & reel
TSSOP8
(Thin shrink outline package)
Tape & reel
TSSOP8
(Automotive grade level)
Tape & reel
MiniSO-8
Tape & reel
V358ID
V358AID
V358YD
V358AY
V358I
V358A
V358Y
V58AY
TSV358IST
K175
TSV358AIST
K184
TSV324ID/IDT
SO-14
TSV324AID/AIDT
TSV324IYD/IYDT(1)
TSV324AIYD/AIYDT(1)
TSV324IPT
TSV324AIPT
TSV324AIYPT(1)
(1)
TSV324IYPT
Tube or
tape & reel
V324ID
V324AI
V324YD
SO-14
(Automotive grade level)
Tube or tape & reel
TSSOP14
(Thin shrink outline package)
Tape & reel
TSSOP14
(Automotive grade level)
Tape & reel
V324AY
V324IP
V324A
V324AY
V324Y
1. Qualification and characterization according to AEC Q100 and Q003 or equivalent, advanced screening according to AEC
Q001 & Q 002 or equivalent are on-going.
15/17
Revision history
5
TSV321-TSV358-TSV324
Revision history
Table 11.
Document revision history
Date
Revision
2-Aug-2005
1
First release - Products in full production.
20-Sep-2005
2
Addition of TS321A/TS324A/TS358A data in tables in Section 2:
Electrical characteristics on page 4.
Minor formatting and grammatical changes.
7-Dec-2005
3
Missing PPAP references inserted see Section 4: Ordering
information on page 15.
4
Correction made on output drive capability, 80mA in description on
cover page.
SVR measurement conditions inserted in electrical characteristics
tables.
Offset voltage limit in temperature added in Section 2: Electrical
characteristics on page 4.
Correction made on Input Bias Current typical value in Section 2:
Electrical characteristics on page 4.
Captions of electrical characteristics figures updated.
Automotive grade order codes added to Section 4: Ordering
information on page 15.
5
Corrected SO-14 Rthja value to 105 °C/W.
Updated presentation of package information.
Corrected footnote for automotive grade order codes in order code
table.
28-Jun-2007
21-Feb-2008
16/17
Changes
TSV321-TSV358-TSV324
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2008 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
17/17