POINN TIPP112

TIPP110, TIPP111, TIPP112
NPN SILICON POWER DARLINGTONS
Copyright © 1997, Power Innovations Limited, UK
●
20 W Pulsed Power Dissipation
●
100 V Capability
●
2 A Continuous Collector Current
●
MAY 1989 - REVISED MARCH 1997
LP PACKAGE
(TOP VIEW)
E
1
2
3
C
4 A Peak Collector Current
B
MDTRAB
absolute maximum ratings at 25°C case temperature (unless otherwise noted)
RATING
SYMBOL
TIPP110
Collector-base voltage (IE = 0)
TIPP111
VCBO
80
V
100
TIPP110
TIPP111
UNIT
60
TIPP112
Collector-emitter voltage (IB = 0)
VALUE
60
VCEO
TIPP112
80
V
100
V EBO
5
V
IC
2
A
ICM
4
A
IB
50
mA
Continuous device dissipation at (or below) 25°C case temperature (see Note 2)
Ptot
0.8
W
Pulsed power dissipation (see Note 3)
PT
20
W
°C
Emitter-base voltage
Continuous collector current
Peak collector current (see Note 1)
Continuous base current
Operating junction temperature range
Storage temperature range
Lead temperature 3.2 mm from case for 10 seconds
Tj
-55 to +150
Tstg
-55 to +150
°C
TL
260
°C
NOTES: 1. This value applies for tp ≤ 0.3 ms, duty cycle ≤ 10%.
2. Derate linearly to 150°C case temperature at the rate of 0.32 W/°C.
3. VCE = 20 V, IC = 1 A, PW = 10 ms, duty cycle ≤ 2%.
PRODUCT
INFORMATION
Information is current as of publication date. Products conform to specifications in accordance
with the terms of Power Innovations standard warranty. Production processing does not
necessarily include testing of all parameters.
1
TIPP110, TIPP111, TIPP112
NPN SILICON POWER DARLINGTONS
MAY 1989 - REVISED MARCH 1997
electrical characteristics at 25°C case temperature
PARAMETER
V (BR)CEO
ICEO
ICBO
IEBO
hFE
VCE(sat)
VBE
VEC
TEST CONDITIONS
Collector-emitter
breakdown voltage
Collector-emitter
cut-off current
Collector-base
cut-off current
Emitter cut-off
current
MIN
TIPP110
IC = 10 mA
IB = 0
(see Note 4)
TYP
MAX
TIPP111
80
TIPP112
100
V
VCE = 30 V
VBE = 0
TIPP110
2
V CE = 40 V
V BE = 0
TIPP111
2
V CE = 50 V
V BE = 0
TIPP112
2
VCE = 60 V
IB = 0
TIPP110
1
V CE = 80 V
IB = 0
TIPP111
1
V CE = 100 V
IB = 0
TIPP112
1
VEB =
IC = 0
5V
UNIT
60
mA
mA
2
mA
Forward current
VCE =
4V
IC = 1 A
transfer ratio
V CE =
4V
IC = 2 A
8 mA
IC = 2 A
(see Notes 4 and 5)
2.5
V
VCE =
4V
IC = 2 A
(see Notes 4 and 5)
2.8
V
IE =
4A
IB = 0
(see Notes 4 and 5)
3.5
V
Collector-emitter
saturation voltage
Base-emitter
voltage
Parallel diode
forward voltage
IB =
(see Notes 4 and 5)
1000
500
NOTES: 4. These parameters must be measured using pulse techniques, tp = 300 µs, duty cycle ≤ 2%.
5. These parameters must be measured using voltage-sensing contacts, separate from the current carrying contacts and located
within 3.2 mm from device body.
PRODUCT
2
INFORMATION
TIPP110, TIPP111, TIPP112
NPN SILICON POWER DARLINGTONS
MAY 1989 - REVISED MARCH 1997
MECHANICAL DATA
LP003 (TO-92)
3-pin cylindical plastic package
This single-in-line package consists of a circuit mounted on a lead frame and encapsulated within a plastic
compound. The compound will withstand soldering temperature with no deformation, and circuit performance
characteristics will remain stable when operated in high humidity conditions. Leads require no additional
cleaning or processing when used in soldered assembly.
LP003 Falls Within JEDEC
TO-226AA Dimensions
LP003 (TO-92)
5,21
4,44
4,19
3,17
3,43 MIN.
2,67
2,03
2,67
2,03
5,34
4,32
Seating Plane
1,27
(see Note A)
12,7 MIN.
0,56
0,40
1
1,40
1,14
3
2
0,41
0,35
2,67
2,41
ALL LINEAR DIMENSIONS IN MILLIMETERS
NOTE A: Lead dimensions are not controlled in this area.
PRODUCT
MDXXAX
INFORMATION
3
TIPP110, TIPP111, TIPP112
NPN SILICON POWER DARLINGTONS
MAY 1989 - REVISED MARCH 1997
MECHANICAL DATA
LP003 (TO-92)
3-pin cylindical plastic package
This single-in-line package consists of a circuit mounted on a lead frame and encapsulated within a plastic
compound. The compound will withstand soldering temperature with no deformation, and circuit performance
characteristics will remain stable when operated in high humidity conditions. Leads require no additional
cleaning or processing when used in soldered assembly.
LP003 (TO-92) - Formed Leads Version
LP003 Falls Within JEDEC
TO-226AA Dimensions
5,21
4,44
4,19
3,17
3,43 MIN.
2,67
2,03
2,67
2,03
5,34
4,32
4,00 MAX.
0,56
0,40
1
2
3
2,90
2,40
0,41
0,35
2,90
2,40
ALL LINEAR DIMENSIONS IN MILLIMETERS
MDXXAR
PRODUCT
4
INFORMATION
TIPP110, TIPP111, TIPP112
NPN SILICON POWER DARLINGTONS
MAY 1989 - REVISED MARCH 1997
MECHANICAL DATA
LPR
tape dimensions
LP Package (TO-92) Tape (Formed Lead Version)
5,21
4,44
4,19
3,17
3,43 MIN.
2,67
2,03
2,67
2,03
5,34
4,32
4,00 MAX.
0,56
0,40
0,41
0,35
13,70
11,70
32,00
23,00
27,68
17,66
0,50
0,00
2,50 MIN.
16,50
15,50
11,00
8,50
9,75
8,50
2,90
2,40
2,90
2,40
19,00
5,50
19,00
17,50
ø 4,30
3,70
6,75
5,95
13,00
12,40
ALL LINEAR DIMENSIONS IN MILLIMETERS
MDXXAS
PRODUCT
INFORMATION
5
TIPP110, TIPP111, TIPP112
NPN SILICON POWER DARLINGTONS
MAY 1989 - REVISED MARCH 1997
IMPORTANT NOTICE
Power Innovations Limited (PI) reserves the right to make changes to its products or to discontinue any
semiconductor product or service without notice, and advises its customers to verify, before placing orders, that the
information being relied on is current.
PI warrants performance of its semiconductor products to the specifications applicable at the time of sale in
accordance with PI's standard warranty. Testing and other quality control techniques are utilized to the extent PI
deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily
performed, except as mandated by government requirements.
PI accepts no liability for applications assistance, customer product design, software performance, or infringement
of patents or services described herein. Nor is any license, either express or implied, granted under any patent
right, copyright, design right, or other intellectual property right of PI covering or relating to any combination,
machine, or process in which such semiconductor products or services might be or are used.
PI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, INTENDED, AUTHORIZED, OR WARRANTED TO BE
SUITABLE FOR USE IN LIFE-SUPPORT APPLICATIONS, DEVICES OR SYSTEMS.
Copyright © 1997, Power Innovations Limited
PRODUCT
6
INFORMATION