DSEE15-12CC ADVANCE TECHNICAL INFORMATION HiPerDynFREDTM Epitaxial Diode IFAV = 15 A VRRM = 1200 Vc trr = 35 ns ISOPLUS220TM Electrically Isolated Back Surface VRRMc VRRM V V 1200 600 Symbol Type ISOPLUS 220 E153432 DSEE15-12CC 1 Conditions 2 3 Maximum Ratings TC = 100°C; rectangular, d = 0.5 35 15 A A IFSM TVJ = 45°C; tp = 10 ms (50 Hz), sine 110 A EAS TVJ = 25°C; non-repetitive IAS = 1.3 A; L = 180 µH 0.2 mJ IAR VA = 1.5·VR typ.; f = 10 kHz; repetitive 0.1 A -55...+175 175 -55...+150 °C °C °C IFRMS IFAVMc Isolated back surface* Features z z TVJ TVJM Tstg °C TL 1.6 mm (0.063 in) from case for 10 s 260 Ptot TC = 25°C 95 W VISOL 50/60 Hz RMS; IISOL ≤ 1 mA 2500 V~ FC Mounting force Weight typical 11...65 / 2.5...15 N / lb 2 g z z z z z z Applications z z Symbol Conditions IR d TVJ = 25°C Characteristic Values typ. max. VR = VRRM 100 µA 0.5 mA 1.5 2.05 V V 1.6 0.6 K/W K/W IF = 1 A; -di/dt = 200 A/µs; VR = 30 V 35 ns VR = 100 V; IF = 25 A; -diF/dt = 100 A/µs TVJ = 100°C 4 TVJ = 150°C VR = VRRMe VF IF = 15 A; TVJ = 125°C TVJ = 25°C RthJC RthCH z z z z z z IRM z 4.9 Notes: Data given for TVJ = 25OC and per diode unless otherwise specified c Diodes connected in series d Pulse test: pulse Width = 5 ms, Duty Cycle < 2.0 % A Antiparallel diode for high frequency switching devices Antisaturation diode Snubber diode Free wheeling diode in converters and motor control circuits Rectifiers in switch mode power supplies (SMPS) Inductive heating Uninterruptible power supplies (UPS) Ultrasonic cleaners and welders Advantages z trr Silicon chip on Direct-Copper-Bond substrate - High power dissipation - Isolated mounting surface - 2500V electrical isolation Low cathode to tab capacitance (<15pF) Planar passivated chips Very short recovery time Extremely low switching losses Low IRM-values Soft recovery behaviour Epoxy meets UL 94V-0 z Avalanche voltage rated for reliable operation Soft reverse recovery for low EMI/RFI Low IRM reduces: - Power dissipation within the diode - Turn-on loss in the commutating switch e Pulse test: pulse Width = 300 µs, Duty Cycle < 2.0 % © 2003 IXYS All rights reserved IXYS reserves the right to change limits, test conditions and dimensions. DS98816A(07/03) DSEE15-12CC ISOPLUS220 Outline NOTE: 1. Bottom heatsink (Pin 4) is electrically isolated from Pin 1, 2 or 3. 2. Pin connections: 1 - Cathode 2 - Anode/Cathode 3 - Anode