STD30NF06 N-CHANNEL 60V - 0.020 Ω - 28A IPAK/DPAK STripFET™ II POWER MOSFET ■ ■ ■ ■ ■ TYPE VDSS RDS(on) ID STD30NF06 60 V <0.028 Ω 28 A TYPICAL RDS(on) = 0.020Ω EXCEPTIONAL dv/dt CAPABILITY 100% AVALANCHE TESTED THROUGH-HOLE IPAK (TO-251) POWER PACKAGE IN TUBE (SUFFIX “-1") SURFACE-MOUNTING DPAK (TO-252) POWER PACKAGE IN TAPE & REEL (SUFFIX “T4") 3 3 1 2 1 IPAK TO-251 (Suffix “-1”) DPAK TO-252 (Suffix “T4”) DESCRIPTION This Power MOSFET is the latest development of STMicroelectronis unique "Single Feature Size™" stripbased process. The resulting transistor shows extremely high packing density for low on-resistance, rugged avalanche characteristics and less critical alignment steps therefore a remarkable manufacturing reproducibility. INTERNAL SCHEMATIC DIAGRAM APPLICATIONS ■ HIGH CURRENT, HIGH SWITCHING SPEED ■ MOTOR CONTROL , AUDIO AMPLIFIERS ■ SOLENOID AND RELAY DRIVERS ■ DC-DC & DC-AC CONVERTERS ABSOLUTE MAXIMUM RATINGS Symbol VDS VDGR VGS Parameter Drain-source Voltage (VGS = 0) Drain-gate Voltage (RGS = 20 kΩ) Gate- source Voltage Unit 60 V 60 V ± 20 V ID Drain Current (continuous) at TC = 25°C 28 A ID Drain Current (continuous) at TC = 100°C 20 A Drain Current (pulsed) 112 A Total Dissipation at TC = 25°C 70 W 0.47 W/°C Peak Diode Recovery voltage slope 10 V/ns Single Pulse Avalanche Energy 230 mJ -55 to 175 °C IDM(•) Ptot Derating Factor dv/dt (1) EAS (2) Tstg Tj Storage Temperature Max. Operating Junction Temperature (•) Pulse width limited by safe operating area. March 2002 . Value (1) ISD ≤28A, di/dt ≤300A/µs, VDD ≤ V(BR)DSS, Tj ≤ TJMAX (2) Starting T j = 25 oC, ID = 15A, VDD = 30V 1/10 STD30NF06 THERMAL DATA Rthj-case Rthj-amb Tl Thermal Resistance Junction-case Thermal Resistance Junction-ambient Maximum Lead Temperature For Soldering Purpose Max Max 2.14 100 275 °C/W °C/W °C ELECTRICAL CHARACTERISTICS (Tcase = 25 °C unless otherwise specified) OFF Symbol Parameter Test Conditions Drain-source Breakdown Voltage ID = 250 µA, VGS = 0 IDSS Zero Gate Voltage Drain Current (VGS = 0) VDS = Max Rating VDS = Max Rating TC = 100°C IGSS Gate-body Leakage Current (VDS = 0) VGS = ± 20 V V(BR)DSS Min. Typ. Max. 60 Unit V 1 10 µA µA ±100 nA Max. Unit 4 V 0.020 0.028 Ω Typ. Max. Unit ON (*) Symbol Parameter Test Conditions VGS(th) Gate Threshold Voltage VDS = VGS ID = 250 µA RDS(on) Static Drain-source On Resistance VGS = 10 V ID = 15 A Min. Typ. 2 DYNAMIC Symbol 2/10 Parameter Test Conditions gfs (*) Forward Transconductance VDS = 15 V Ciss Coss Crss Input Capacitance Output Capacitance Reverse Transfer Capacitance VDS = 25V, f = 1 MHz, VGS = 0 ID = 15 A Min. 40 S 1750 220 70 pF pF pF STD30NF06 ELECTRICAL CHARACTERISTICS (continued) SWITCHING ON Symbol Parameter Test Conditions Min. Typ. Max. Unit td(on) tr Turn-on Delay Time Rise Time ID = 19 A VDD = 30 V RG = 4.7 Ω VGS = 10 V (Resistive Load, Figure 3) 20 100 Qg Qgs Qgd Total Gate Charge Gate-Source Charge Gate-Drain Charge VDD = 48V ID = 38A VGS= 10V 43 9.5 15 58 nC nC nC Typ. Max. Unit ns ns SWITCHING OFF Symbol td(off) tf Parameter Turn-off Delay Time Fall Time Test Conditions Min. ID = 19 A VDD = 30 V RG = 4.7Ω, VGS = 10 V (Resistive Load, Figure 3) 50 20 ns ns SOURCE DRAIN DIODE Symbol Parameter ISD ISDM (•) Source-drain Current Source-drain Current (pulsed) VSD (*) Forward On Voltage ISD = 28 A Reverse Recovery Time Reverse Recovery Charge Reverse Recovery Current di/dt = 100A/µs ISD = 28 A VDD = 30 V Tj = 150°C (see test circuit, Figure 5) trr Qrr IRRM Test Conditions Min. Typ. VGS = 0 95 260 5.5 Max. Unit 28 112 A A 1.5 V ns µC A (*)Pulsed: Pulse duration = 300 µs, duty cycle 1.5 %. (•)Pulse width limited by safe operating area. Safe Operating Area Thermal Impedance 3/10 STD30NF06 Output Characteristics Transfer Characteristics Transconductance Static Drain-source On Resistance Gate Charge vs Gate-source Voltage Capacitance Variations 4/10 STD30NF06 Normalized Gate Threshold Voltage vs Temperature Normalized on Resistance vs Temperature Source-drain Diode Forward Characteristics Normalized Breakdown Voltage vs Temperature . . 5/10 STD30NF06 Fig. 1: Unclamped Inductive Load Test Circuit Fig. 2: Unclamped Inductive Waveform Fig. 3: Switching Times Test Circuits For Resistive Load Fig. 4: Gate Charge test Circuit Fig. 5: Test Circuit For Inductive Load Switching And Diode Recovery Times 6/10 STD30NF06 TO-251 (IPAK) MECHANICAL DATA mm DIM. MIN. inch TYP. MAX. MIN. TYP. MAX. A 2.2 2.4 0.086 0.094 A1 0.9 1.1 0.035 0.043 A3 0.7 1.3 0.027 0.051 B 0.64 0.9 0.025 0.031 B2 5.2 5.4 0.204 0.212 B3 0.85 B5 0.033 0.3 0.012 B6 0.95 0.037 C 0.45 0.6 0.017 0.023 C2 0.48 0.6 0.019 0.023 D 6 6.2 0.236 0.244 E 6.4 6.6 0.252 0.260 G 4.4 4.6 0.173 0.181 H 15.9 16.3 0.626 0.641 L 9 9.4 0.354 0.370 L1 0.8 1.2 0.031 0.047 L2 0.8 1 0.031 0.039 A1 C2 A3 A C H B B3 = 1 = 2 G = = = E B2 = 3 B5 L D B6 L2 L1 0068771-E 7/10 STD30NF06 TO-252 (DPAK) MECHANICAL DATA mm DIM. MIN. inch TYP. MAX. MIN. TYP. MAX. A 2.2 2.4 0.086 0.094 A1 0.9 1.1 0.035 0.043 A2 0.03 0.23 0.001 0.009 B 0.64 0.9 0.025 0.035 B2 5.2 5.4 0.204 0.212 C 0.45 0.6 0.017 0.023 C2 0.48 0.6 0.019 0.023 D 6 6.2 0.236 0.244 E 6.4 6.6 0.252 0.260 G 4.4 4.6 0.173 0.181 H 9.35 10.1 0.368 0.397 L2 0.8 L4 0.031 0.6 1 0.023 0.039 A1 C2 A H A2 C DETAIL "A" L2 D = 1 = G 2 = = = E = B2 3 B DETAIL "A" L4 0068772-B 8/10 STD30NF06 *on sales type 9/10 STD30NF06 Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is registered trademark of STMicroelectronics 2002 STMicroelectronics - All Rights Reserved All other names are the property of their respective owners. STMicroelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco Singapore - Spain - Sweden - Switzerland - United Kingdom - United States. http://www.st.com 10/10