ALUMINUM ELECTROLYTIC CAPACITORS CM CM Chip Type, Low Impedance series Chip Type, Low Impedance Chip type, low impedance temperature range up to +105°C. Applicable to automatic series mounting machine fed with carrier tape. Compliant to the RoHS directive (2011/65/EU). CL Smaller Higher capacitance CM ■Specifications Specifications Item Item PerformancePerformance Characteristics Characteristics – 55 to +105C –55 to +105°C 6.36.3 to 50V to 50V 10 to 2200 F Performance Characteristics 10 to 2200µF 20% at +105C 120Hz, 20C – 55 to ± 20% at 120Hz, 20°C of rated voltage, leakage current is not more than 0.01CV After minute's application 6.3 to250V After 2 minutes' application of rated voltage, leakage current is not more than 0.01 CV Measurement frequency : 120Hz, Leakage Current Rated2200 voltage 6.3 10 16 25 35 50 F (V) Rated Capacitance Tangent of loss angleRange (tan δ) 10 to Measurement frequency : 120Hz at 20°C Rated voltage (V) 0.266.3 0.1910 0.16 16 0.14 25 0.12 35 0.10 50 Temperature : 20C tan (MAX.) Capacitance Tolerance Tangent of loss angle (tan δ) 20% at 120Hz, 20C 0.26 tan δ (MAX.) 0.19 0.16 0.14 0.12 0.10 After 2 minute's application of rated voltage, leakage current is not more than 0.01CV Leakage Current Measurement frequency : 120Hz Category Temperature TemperatureRange Range Category ■ Specifications Rated Voltage Range Range Rated Voltage Rated Capacitance Range Item Rated Capacitance Range Capacitance Tolerance Category Temperature Range Capacitance Tolerance Leakage Current Rated Voltage Range Rated voltage (V) 6.3 10 2 6.3 16 210 3 2 0.16 3 2 4 3 43 55°C / Z+20°C 6.3 4 Rated voltageZ– (V) 104 25 35 50 frequency : 120Hz MeasurementMeasurement frequency : 120Hz, 25 35250 50 2 35 2 Temperature : 20C 2 230.10 23 0.12 3 3 33 33 3 Measurement frequency : 120Hz 3 335 3 50 25 Capacitance Change Within 30% of the initial capacitance value 2 2 2 2 2 2 Z–25C / Z+20C Impedance ratio tan3δ 200% or less than the initial specified value 3 3 3 3 / Z+20C Capacitance change Within ±30%3of the initial capacitance value ZTThe / Z20 (MAX.) Z–40C specifications listed at right shall be met Leakage current Less than or equal to the initial specified value 4 4 4 3 3 3than Z–55C / Z+20C tan δ 200% or less the initial specified value when the capacitors are restored to 20°C after the Less than or equal to the initial specified valueclause Leakage current After storing the capacitors no load at 105C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 rated voltage is appliedunder for 2000 hours at 105°C. Capacitance Change Within 30% of the initial capacitance value 4.1 at 20C, they shall meet the specified values for the endurance characteristics listed above. tan δ 200% or less than the initial specified value After storing the capacitors under no load at 105°C for 1000 hoursCapacitance and then performing voltage treatment onspecified JIS Cvalue 5101-4 Leakage current Less than or of equal tobased thecapacitance initial value Change Within 10% the initial clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. tan δ Less than or equal to the initial specified After storing the capacitors under load at 105C 1000 hours andisthen performing voltage treatment based on JIS C 5101-4 clause value The capacitors are kept on ano hot plate for 30for seconds, which or equal value LeakageCapacitance change current ±10%toofthe theinitial initial specified capacitance value 4.1 maintained at 20C, theyat shall meetThe the specified values the the endurance characteristics listed above. Less thanWithin 250°C. capacitors shallfor meet characteristic Less than or equal to the initial specified value tan δ Black print on the case requirements listedtop. at right when they are removed from the plate Capacitance Change Within 10% of the initial capacitance value Less than or equal to the initial specified value Leakage current and restored to 20°C. tan δ Less than or equal to the initial specified value Black print on the case top. Leakage current Less than or equal to the initial specified value Rated voltageRated (V) voltage 6.3 /(V) Z–25C Z+20C 10 Impedance ratio Z– 25°C / Z+20°C (MAX.)ratio Z–40C 0.26 0.19 / Z+20C Stability at Low Temperature ZTtan /Impedance Z20 (MAX.) Z– 40°C / Z+20°C ZT / Z20 (MAX.) Z–55C / Z+20C 1 Black print on the case top. Positive C 0.2 0.3MAX. 0.3MAX. L 0.5 Pressure relief vent Capacitance Voltage Voltage V V 6.3 Code Code j H 6.3 j 10 A 16 C 10 6.3 A j 16 10 C A 25 16 EC 25 E Negative 35 V 50 H 3525 50 35 V E H V 50 H 8 2 3 4 5 6 7 8 9 10 11 12 13 14 9 10 11 12 13 14 Size code Configuration Capacitance tolerance (20%) Rated capacitance (100F) Rated voltage (16V) Capacitance tolerance Series (±20%) name Rated capacitance (100µF) Type Negative Negative H Voltage V Code C 0.2 L 0.5 Pressure relief vent 7 U CM 1 C 1 0 1 M C L 1 GS Rated voltage (16V) φD¥L Positive B 0.2 φD 0.5 φD 0.5 Series Capacitance 6 Negative A 0.2 Lot No. C 0.2 H B 0.2 a2 470E CM A2 470E CM Voltage( E : 25V ) Trade mark Lot No. Plastic platform 5 Positive Plastic platform L 0.3 0.3MAX. Series (φ8 × 10L, φ10 ) H 4 A 0.2 A 0.2 B 0.2 φD 0.5 L 0.3 Capacitance Lot No. Voltage( E : 25V ) Trade mark C 0.2 3 A 0.2 0.3MAX. Capacitance A2 100C CM Lot No. Series Plastic platform 2 U CM 1 C 1 0 1 M C L 1 GS Type numbering system (Example : 16V 100 µF) Taping code 1 Positive B 0.2 Voltage( C : 16V ) φD 0.5 a2 100C CM (φ4 to φ6.3) A 0.2 Series A 0.2 A 0.2 Chip Type A 0.2 Plastic platform Voltage( C : 16V ) 0.5MAX. Marking Marking 0.5MAX. E Resistance to soldering Marking heat Resistance to soldering heat 16 16 252 0.1432 43 164 E Shelf Life Resistance to soldering heat Shelf Life 0.5MAX. Endurance Shelf Life Endurance 0.5MAX. E Stability at Low Temperature Endurance E Stability Tangent at of Low loss Temperature angle (tan δ) 4 ¥ 5.8 5 ¥ 5.8 6.3 ¥ 5.8 A 1.8 2.1 2.4 B 4.3 5.3 6.6 Taping code Configuration φD 8 · 10 φD Code 4 to 6.3 CL 8 · 10 Series name 6.3 ¥ 7.7 8 ¥ 10 Type 2.4 2.9 6.6 8.3 CφD×L 5.3 6.6 6.6 8.3 4.3 4 × 5.8 5 × 5.8 6.3 × 5.8 6.3 × 7.7 8 × 10 E 1.3 2.2 2.2 3.1 1.0 2.1 2.4 2.4 2.9 A 1.8 L 5.8 5.8 7.7 10 5.8 B 5.3 6.6 6.6 8.3 4.3 H 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.8 to 1.1 C 5.3 6.6 6.6 8.3 4.3 E 1.0 1.3 2.2 2.2 3.1 L 5.8 5.8 5.8 7.7 10 H Size code Code 4 to 6.3Configuration CL 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.8 to 1.1 NL NL (mm) 10 ¥ 10 3.2 10.3 (mm) 10.3 10 × 10 4.5 3.2 10 10.3 0.8 to 1.1 10.3 4.5 10 0.8 to 1.1 Dimension table in next page. CAT.8100D ALUMINUM ELECTROLYTIC CAPACITORS CM series Dimensions V 6.3 10 16 25 35 50 Code 0J 1A 1C 1E 1V 1H 10 100 22 220 4 × 5.8 1.00 160 4 × 5.8 1.00 160 33 330 4 × 5.8 1.00 160 5 × 5.8 0.36 240 47 470 68 680 100 101 150 151 220 221 5 × 5.8 0.36 330 331 6.3 × 5.8 0.26 470 471 6.3 × 7.7 560 561 680 681 6.3 × 7.7 4 × 5.8 4 × 5.8 1.00 160 5 × 5.8 0.36 240 5 × 5.8 0.36 240 4 × 5.8 1.00 160 5 × 5.8 0.36 240 5 × 5.8 0.36 240 6.3 × 5.8 0.26 300 5 × 5.8 0.36 240 6.3 × 5.8 0.26 300 6.3 × 5.8 0.26 300 5 × 5.8 0.36 240 6.3 × 5.8 0.26 300 6.3 × 7.7 0.16 600 6.3 × 7.7 0.16 600 240 6.3 × 5.8 0.26 300 6.3 × 5.8 0.26 300 6.3 × 7.7 0.16 600 300 6.3 × 7.7 0.16 600 6.3 × 7.7 0.16 600 8 × 10 0.08 850 0.16 600 6.3 × 7.7 0.16 600 0.16 600 1.00 160 8 × 10 0.08 820 821 1000 102 1500 152 8 × 10 2200 222 10 × 10 0.08 0.08 850 10 × 10 0.08 850 10 × 10 85 0.88 165 5 × 5.8 0.88 165 6.3 × 5.8 0.68 195 6.3 × 7.7 0.34 350 8 × 10 0.18 670 10 × 10 0.12 900 0.06 1190 850 10 × 10 8 × 10 2.30 5 × 5.8 850 10 × 10 8 × 10 ● 4 × 5.8 0.06 1190 0.06 1190 0.06 1190 0.06 1190 × Impedance Rated ripple MAX. Impedance (Ω) at 20℃ 100kHz, Rated ripple current(mArms) at 105℃ 100kHz ●In this case, 6 will be put at 12th digit of type numbering system. ● Frequency coefficient of rated ripple current Frequency coefficient of rated ripple current Frequency Frequency Coefficient Coefficient 50Hz 120Hz 300Hz 1kHz 10kHz or more 50 Hz 120 Hz 300 Hz 1 kHz 10 kHz or more 0.35 0.50 0.64 0.83 1.00 1.00 0.35 0.50 0.64 0.83 Taping specifications are given in page 23. Recommended land size, soldering by refrow are given in page 18, 19. Please refer to page 3 for the minimum order quantity. CAT.8100D