Composite Transistors UP04314 Silicon NPN epitaxial planar type (Tr1) Silicon PNP epitaxial planar type (Tr2) 0.20+0.05 –0.02 (0.30) 4 ■ Features ■ Basic Part Number 1 5˚ 2 3 (0.50)(0.50) 1.00±0.05 1.60±0.05 (0.20) • Two elements incorporated into one package (Transistors with built-in resistor) • Reduction of the mounting area and assembly cost by one half Display at No.1 lead Rating Unit VCBO 50 V Collector-emitter voltage (Base open) VCEO 50 V IC 100 mA Collector-base voltage (Emitter open) VCBO −50 V Collector-emitter voltage (Base open) VCEO −50 V Collector current Tr2 Overall Collector current IC −100 mA Total power dissipation PT 125 mW Junction temperature Tj 125 °C Storage temperature Tstg −55 to +125 °C Publication date: December 2003 SJJ00240BED 1: Emitter (Tr1) 2: Base (Tr1) 3: Collector (Tr2) 0.10 max. Symbol Collector-base voltage (Emitter open) 0 to 0.02 5˚ ■ Absolute Maximum Ratings Ta = 25°C Parameter 0.55±0.05 • UNR2214 + UNR2114 Tr1 (0.20) 5 1.20±0.05 6 Unit: mm 0.10±0.02 1.60±0.05 For switching/digital circuits 4: Emitter (Tr2) 5: Base (Tr2) 6: Collector (Tr1) SSMini6-F1 Package Marking Symbol: CA Internal Connection 6 5 4 Tr1 Tr2 1 2 3 1 UP04314 ■ Electrical Characteristics Ta = 25°C ± 3°C • Tr1 Parameter Symbol Collector-base voltage (Emitter open) VCBO IC = 10 µA, IE = 0 50 Collector-emitter voltage (Base open) VCEO IC = 2 mA, IB = 0 50 Collector-base cutoff current (Emitter open) ICBO VCB = 50 V, IE = 0 0.1 Collector-emitter cutoff current (Base open) ICEO VCE = 50 V, IB = 0 0.5 µA Emitter-base cutoff current (Collector open) IEBO VEB = 6 V, IC = 0 0.2 mA hFE VCE = 10 V, IC = 5 mA Forward current transfer ratio Collector-emitter saturation voltage VCE(sat) Conditions Min Typ VOH VCC = 5 V, VB = 0.5 V, RL = 1 kΩ Output voltage low-level VOL VCC = 5 V, VB = 2.5 V, RL = 1 kΩ Unit V V µA 80 IC = 10 mA, IB = 0.3 mA Output voltage high-level Max 0.25 4.9 V V 0.2 V Input resistance R1 −30% 10 +30% kΩ Resistance ratio R1 / R 2 0.17 0.21 0.25 Transition frequency fT VCB = 10 V, IE = −2 mA, f = 200 MHz 150 MHz • Tr2 Parameter Symbol Collector-base voltage (Emitter open) VCBO IC = −10 µA, IE = 0 −50 Collector-emitter voltage (Base open) VCEO IC = −2 mA, IB = 0 −50 Collector-base cutoff current (Emitter open) ICBO VCB = −50 V, IE = 0 − 0.1 Collector-emitter cutoff current (Base open) ICEO VCE = −50 V, IB = 0 − 0.5 µA Emitter-base cutoff current (Collector open) IEBO VEB = −6 V, IC = 0 − 0.2 mA hFE VCE = −10 V, IC = −5 mA Forward current transfer ratio Collector-emitter saturation voltage VCE(sat) Conditions Min Typ VOH VCC = −5 V, VB = − 0.5 V, RL = 1 kΩ Output voltage low-level VOL VCC = −5 V, VB = −2.5 V, RL = 1 kΩ Unit V V µA 80 IC = −10 mA, IB = − 0.3 mA Output voltage high-level Max − 0.25 V − 0.2 V −4.9 V Input resistance R1 −30% 10 +30% kΩ Resistance ratio R1 / R 2 0.17 0.21 0.25 Transition frequency fT VCB = −10 V, IE = 1 mA, f = 200 MHz 80 MHz Note) Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7030 measuring methods for transistors. Common characteristics chart PT Ta Total power dissipation PT (mW) 150 125 100 75 50 25 0 0 40 80 120 160 Ambient temperature Ta (°C) 2 SJJ00240BED UP04314 Characteristics charts of Tr1 VCE(sat) IC Collector current IC (mA) IB = 1.0 mA 120 0.9 mA 0.8 mA 0.7 mA 0.6 mA 0.5 mA 0.4 mA 80 0.3 mA 40 0.2 mA 0.1 mA 0 0 4 8 12 100 IC / IB = 10 1 Ta = 75°C 25°C 0.1 Ta = 75°C 200 25°C −25°C 100 0.01 0.1 1 10 0 100 1 Collector current IC (mA) 4 3 2 100 1 000 VIN IO 100 VO = 5 V Ta = 25°C 103 Input voltage VIN (V) f = 1 MHz IE = 0 Ta = 25°C 10 Collector current IC (mA) IO VIN 104 Output current IO (µA) Collector output capacitance C (pF) (Common base, input open circuited) ob 300 −25°C Cob VCB 5 VCE = 10 V 10 Collector-emitter voltage VCE (V) 6 hFE IC 400 Forward current transfer ratio hFE Ta = 25°C Collector-emitter saturation voltage VCE(sat) (V) IC VCE 160 102 10 VO = 0.2 V Ta = 25°C 10 1 0.1 1 0 0.1 1 10 Collector-base voltage VCB (V) 100 1 0.4 0.6 0.8 1.0 1.2 Input voltage VIN (V) SJJ00240BED 1.4 0.01 0.1 1 10 100 Output current IO (mA) 3 UP04314 Characteristics charts of Tr2 IC VCE VCE(sat) IC Ta = 25°C IB = −1.0 mA Collector current IC (mA) −120 − 0.9 mA − 0.8 mA − 0.7 mA − 0.6 mA − 0.5 mA −80 − 0.4 mA − 0.3 mA − 0.2 mA −40 − 0.1 mA 0 −4 0 −8 Collector-emitter voltage VCE −12 Collector-emitter saturation voltage VCE(sat) (V) −100 IC / IB = 10 −10 −1 Ta = 75°C 25°C − 0.1 (V) −1 −10 −104 25°C −25°C 100 0 −1 −100 4 3 2 −10 −100 −1 000 Collector current IC (mA) VIN IO VO = −5 V Ta = 25°C −103 −1 000 VO = − 0.2 V Ta = 25°C −100 Input voltage VIN (V) Output current IO (µA) Collector output capacitance C (pF) (Common base, input open circuited) ob Ta = 75°C 200 IO VIN −102 −10 −10 −1 1 0 − 0.1 −1 −10 −100 Collector-base voltage VCB (V) 4 300 Collector current IC (mA) f = 1 MHz IE = 0 Ta = 25°C 5 VCE = −10 V −25°C − 0.01 − 0.1 Cob VCB 6 hFE IC 400 Forward current transfer ratio hFE −160 −1 − 0.4 − 0.6 − 0.8 −1.0 −1.2 Input voltage VIN (V) SJJ00240BED −1.4 − 0.1 − 0.1 −1 −10 Output current IO (mA) −100 Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technical information described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuits examples of the products. It neither warrants non-infringement of intellectual property right or any other rights owned by our company or a third party, nor grants any license. (3) We are not liable for the infringement of rights owned by a third party arising out of the use of the technical information as described in this material. (4) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: • Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. • Any applications other than the standard applications intended. (5) The products and product specifications described in this material are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (7) When using products for which damp-proof packing is required, observe the conditions (including shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets are individually exchanged. (8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita Electric Industrial Co., Ltd. 2003 SEP