ONSEMI MJE9780

Order this document
by MJE9780/D
SEMICONDUCTOR TECHNICAL DATA
*Motorola Preferred Device
The MJE9780 is designed for vertical output of 14–inch to 17–inch televisions and
CRT monitors, as well as other applications requiring a 150 volt PNP transistor.
Features:
PNP SILICON POWER
TRANSISTOR
3.0 AMPERES
150 VOLTS
• Standard TO–220AB Package
• Gain Range of 50 – 200 at 500 mAdc/10 volts
MAXIMUM RATINGS (TC = 25°C unless otherwise noted)
Symbol
MJE9780
Unit
Collector–Emitter Sustaining Voltage
VCEO
150
Vdc
Collector–Base Voltage
VCBO
200
Vdc
Emitter–Base Voltage
VEBO
6.0
Vdc
Collector Current — Continuous
Collector Current — Peak
IC
ICM
3.0
5.0
Adc
Total Power Dissipation (TA = 25°C)
Derate above 25°C
PD
2.0
0.016
Watts
W/°C
Total Power Dissipation
Derate above 25°C
PD
40
0.32
Watts
W/°C
TJ, Tstg
– 55 to 150
°C
Thermal Resistance — Junction to Case
Thermal Resistance — Junction to Ambient
RθJC
RθJA
3.12
62.5
°C/W
Maximum Lead Temperature for Soldering
Purposes: 1/8″ from Case for 5 Seconds
TL
260
°C
Rating
Operating and Storage Temperature
THERMAL CHARACTERISTICS
CASE 221A–06
TO–220AB
ELECTRICAL CHARACTERISTICS (TC = 25°C unless otherwise noted)
Characteristics
Symbol
Min
Typ
Max
VCEO(sus)
°
150
°
—
—
200
—
—
6.0
—
—
—
—
10
—
—
10
Unit
OFF CHARACTERISTICS*
Collector–Emitter Sustaining Voltage
(IC = 50 mA, IB = 0)
Collector–Base Voltage
(IC = 5.0 mAdc)
VCBO
Emitter–Base Voltage
(IB = 5.0 mAdc)
VEBO
Emitter Cutoff Current
(VEB = 5.0 Vdc, IC = 0)
IEBO
Collector Cutoff Current
(VCB = 150 Vdc, IE = 0)
ICBO
Vdc
Vdc
Vdc
µAdc
µAdc
* Indicates Pulse Test: P.W. = 300 µsec max, Duty Cycle = 2%.
(continued)
This document contains information on a new product. Specifications and information herein are subject to change without notice.
Preferred devices are Motorola recommended choices for future use and best overall value.
REV 7
 Motorola, Inc. 1995
Motorola Bipolar Power Transistor Device Data
1
MJE9780
ELECTRICAL CHARACTERISTICS — continued (TC = 25°C unless otherwise noted)
Symbol
Min
Typ
Max
Collector–Emitter Saturation Voltage
(IC = 500 mAdc, IB = 50 mAdc)
VCE(sat)
°
—
°
—
0.8
Base–Emitter On Voltage
(IC = 500 mAdc, VCE = 4.0 Vdc)
VBE(on)
—
—
1.5
DC Current Gain
(IC = 50 mAdc, VCE = 10 Vdc)
(IC = 500 mAdc, VCE = 10 Vdc)
hFE
60
50
—
—
—
200
°
—
°
5.0
—
Characteristics
Unit
ON CHARACTERISTICS*
Vdc
Vdc
—
DYNAMIC CHARACTERISTICS
Current Gain Bandwidth Product
(IC = 500 mAdc, VCE = 10 Vdc, f = 1.0 MHz)
fT
MHz
* Indicates Pulse Test: P.W. = 300 µsec max, Duty Cycle = 2%.
2
Motorola Bipolar Power Transistor Device Data
MJE9780
PACKAGE DIMENSIONS
–T–
B
SEATING
PLANE
C
F
T
S
4
DIM
A
B
C
D
F
G
H
J
K
L
N
Q
R
S
T
U
V
Z
A
Q
1 2 3
U
H
K
Z
L
R
V
J
G
D
N
CASE 221A–06
TO–220AB
ISSUE Y
Motorola Bipolar Power Transistor Device Data
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. DIMENSION Z DEFINES A ZONE WHERE ALL
BODY AND LEAD IRREGULARITIES ARE
ALLOWED.
INCHES
MIN
MAX
0.570
0.620
0.380
0.405
0.160
0.190
0.025
0.035
0.142
0.147
0.095
0.105
0.110
0.155
0.018
0.025
0.500
0.562
0.045
0.060
0.190
0.210
0.100
0.120
0.080
0.110
0.045
0.055
0.235
0.255
0.000
0.050
0.045
–––
–––
0.080
STYLE 1:
PIN 1.
2.
3.
4.
MILLIMETERS
MIN
MAX
14.48
15.75
9.66
10.28
4.07
4.82
0.64
0.88
3.61
3.73
2.42
2.66
2.80
3.93
0.46
0.64
12.70
14.27
1.15
1.52
4.83
5.33
2.54
3.04
2.04
2.79
1.15
1.39
5.97
6.47
0.00
1.27
1.15
–––
–––
2.04
BASE
COLLECTOR
EMITTER
COLLECTOR
3
MJE9780
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit,
and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters can and do vary in different
applications. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does
not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in
systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of
the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such
unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless
against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part.
Motorola and
are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer.
How to reach us:
USA / EUROPE: Motorola Literature Distribution;
P.O. Box 20912; Phoenix, Arizona 85036. 1–800–441–2447
JAPAN: Nippon Motorola Ltd.; Tatsumi–SPD–JLDC, Toshikatsu Otsuki,
6F Seibu–Butsuryu–Center, 3–14–2 Tatsumi Koto–Ku, Tokyo 135, Japan. 03–3521–8315
MFAX: [email protected] – TOUCHTONE (602) 244–6609
INTERNET: http://Design–NET.com
HONG KONG: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park,
51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298
4
◊
Motorola Bipolar Power Transistor Device Data
*MJE9780/D*
MJE9780/D