ONSEMI NCV8405STT3G

NCV8405
Self-Protected Low Side
Driver with Temperature
and Current Limit
NCV8405 is a three terminal protected Low−Side Smart Discrete
device. The protection features include overcurrent, overtemperature,
ESD and integrated Drain−to−Gate clamping for overvoltage
protection. This device is suitable for harsh automotive environments.
Features
•
•
•
•
•
•
•
•
•
•
Short−Circuit Protection
Thermal Shutdown with Automatic Restart
Overvoltage Protection
Integrated Clamp for Inductive Switching
ESD Protection
dV/dt Robustness
Analog Drive Capability (Logic Level Input)
AEC−Q101 Qualified
NCV Prefix for Automotive and Other Applications Requiring Site
and Change Control
These Devices are Pb−Free and are RoHS Compliant
http://onsemi.com
V(BR)DSS
(Clamped)
RDS(ON) TYP
ID MAX
42 V
90 mW @ 10 V
6.0 A*
*Max current limit value is dependent on input
condition.
Drain
Overvoltage
Protection
Gate
Input
ESD Protection
Temperature
Limit
Current
Limit
Current
Sense
Typical Applications
• Switch a Variety of Resistive, Inductive and Capacitive Loads
• Can Replace Electromechanical Relays and Discrete Circuits
• Automotive / Industrial
Source
MARKING
DIAGRAM
DRAIN
4
4
SOT−223
CASE 318E
STYLE 3
AYW
8405 G
1
G
2
3
1
2
3
SOURCE
GATE
DRAIN
A
= Assembly Location
Y
= Year
W
= Work Week
8402 = Specific Device Code
G
= Pb−Free Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
Device
Package
Shipping†
NCV8405STT1G
SOT−223
(Pb−Free)
1000/Tape & Reel
NCV8405STT3G
SOT−223
(Pb−Free)
4000/Tape & Reel
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
© Semiconductor Components Industries, LLC, 2009
December, 2009 − Rev. P0
1
Publication Order Number:
NCV8405/D
NCV8405
MAXIMUM RATINGS (TJ = 25°C unless otherwise noted)
Rating
Symbol
Value
Unit
VDSS
42
V
VDGR
42
V
Gate−to−Source Voltage
VGS
"14
V
Continuous Drain Current
ID
Drain−to−Source Voltage Internally Clamped
Drain−to−Gate Voltage Internally Clamped
(RG = 1.0 MW)
Power Dissipation
@ TA = 25°C (Note 1)
@ TA = 25°C (Note 2)
@ TT = 25°C (Note 1)
Internally Limited
PD
1.0
1.7
11.4
W
RqJA
RqJA
RqJT
130
72
11
°C/W
Single Pulse Drain−to−Source Avalanche Energy
(VDD = 40 V, VG = 5.0 V, IPK = 2.8 A, L = 80 mH, RG(ext) = 25 W, TJ = 25°C)
EAS
275
mJ
Load Dump Voltage
VLD
53
V
Operating Junction Temperature
TJ
−40 to 150
°C
Storage Temperature
Tstg
−55 to 150
°C
Thermal Resistance
Junction−to−Ambient Steady State (Note 1)
Junction−to−Ambient Steady State (Note 2)
Junction−to−Tab Steady State (Note 1)
VLD = VA + VS (VGS = 0 and 10 V, RI = 2.0 W, RL = 6.0 W, td = 400 ms)
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
1. Surface−mounted onto min pad FR4 PCB, (2 oz. Cu, 0.06″ thick).
2. Surface−mounted onto 2″ sq. FR4 board (1″ sq., 1 oz. Cu, 0.06″ thick).
+
ID
DRAIN
IG
+
VDS
GATE
SOURCE
VGS
−
−
Figure 1. Voltage and Current Convention
http://onsemi.com
2
NCV8405
ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise noted)
Parameter
Test Condition
Symbol
Min
Typ
Max
Unit
VGS = 0 V, ID = 10 mA, TJ = 25°C
V(BR)DSS
42
46
51
V
42
45
51
0.5
2.0
2.0
10
50
100
1.6
2.0
OFF CHARACTERISTICS
Drain−to−Source Breakdown Voltage
(Note 3)
VGS = 0 V, ID = 10 mA, TJ = 150°C
(Note 5)
VGS = 0 V, VDS = 32 V, TJ = 25°C
Zero Gate Voltage Drain Current
IDSS
VGS = 0 V, VDS = 32 V, TJ = 150°C
(Note 5)
Gate Input Current
VDS = 0 V, VGS = 5.0 V
IGSSF
mA
mA
ON CHARACTERISTICS (Note 3)
Gate Threshold Voltage
VGS = VDS, ID = 150 mA
Gate Threshold Temperature Coefficient
VGS(th)
1.0
VGS(th)/TJ
VGS = 10 V, ID = 1.4 A, TJ = 25°C
4.0
90
100
VGS = 10 V, ID = 1.4 A, TJ = 150°C
(Note 5)
165
190
Static Drain−to−Source On−Resistance
RDS(on)
VGS = 5.0 V, ID = 1.4 A, TJ = 25°C
105
120
VGS = 5.0 V, ID = 1.4 A, TJ = 150°C
(Note 5)
185
210
VGS = 5.0 V, ID = 0.5 A, TJ = 25°C
105
120
VGS = 5.0 V, ID = 0.5 A, TJ = 150°C
(Note 5)
185
210
Source−Drain Forward On Voltage
VGS = 0 V, IS = 7.0 A
VSD
VGS = 10 V, VDD = 12 V
ID = 2.5 A, RL = 4.7 W
−dVDS/dtON
1.0
dVDS/dtOFF
0.4
V
−mV/°C
mW
1.05
V
tON
20
ms
tOFF
110
SWITCHING CHARACTERISTICS (Note 5)
Turn−ON Time (10% VIN to 90% ID)
Turn−OFF Time (90% VIN to 10% ID)
Slew−Rate ON (70% VDS to 50% VDS)
VGS = 10 V, VDD = 12 V,
RL = 4.7 W
Slew−Rate OFF (50% VDS to 70% VDS)
V/ms
SELF PROTECTION CHARACTERISTICS (TJ = 25°C unless otherwise noted) (Note 4)
Current Limit
VDS = 10 V, VGS = 5.0 V, TJ = 25°C
6.0
9.0
11
VDS = 10 V, VGS = 5.0 V, TJ = 150°C
(Note 5)
3.0
5.0
8.0
VDS = 10 V, VGS = 10 V, TJ = 25°C
7.0
10.5
13
VDS = 10 V, VGS = 10 V, TJ = 150°C
(Note 5)
4.0
7.5
10
150
180
200
150
165
Temperature Limit (Turn−off)
Thermal Hysteresis
Temperature Limit (Turn−off)
Thermal Hysteresis
ILIM
VGS = 5.0 V (Note 5)
TLIM(off)
VGS = 5.0 V
DTLIM(on)
VGS = 10 V (Note 5)
TLIM(off)
VGS = 10 V
DTLIM(on)
15
VGS = 5 V ID = 1.0 A
IGON
50
IGCL
0.05
IGTL
0.22
A
°C
15
185
GATE INPUT CHARACTERISTICS (Note 5)
Device ON Gate Input Current
VGS = 10 V ID = 1.0 A
Current Limit Gate Input Current
VGS = 5 V, VDS = 10 V
400
VGS = 10 V, VDS = 10 V
Thermal Limit Fault Gate Input Current
VGS = 5 V, VDS = 10 V
mA
mA
0.4
VGS = 10 V, VDS = 10 V
mA
1.0
ESD ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise noted) (Note 5)
Electro−Static Discharge Capability
Human Body Model (HBM)
Machine Model (MM)
3. Pulse Test: Pulse Width ≤ 300 ms, Duty Cycle ≤ 2%.
4. Fault conditions are viewed as beyond the normal operating range of the part.
5. Not subject to production testing.
http://onsemi.com
3
ESD
4000
400
V
NCV8405
TYPICAL PERFORMANCE CURVES
10
1000
TJstart = 25°C
Emax (mJ)
IL(max) (A)
TJstart = 25°C
TJstart = 150°C
1
10
TJstart = 150°C
10
10
100
L (mH)
100
Figure 2. Single Pulse Maximum Switch−off
Current vs. Load Inductance
100
L (mH)
Figure 3. Single Pulse Maximum Switching
Energy vs. Load Inductance
1000
10
Emax (mJ)
IL(max) (A)
TJstart = 25°C
1
TJstart = 25°C
100
TJstart = 150°C
TJstart = 150°C
0.1
1
10
10
TIME IN CLAMP (ms)
1
Figure 4. Single Pulse Maximum Inductive
Switch−off Current vs. Time in Clamp
9V
14
Figure 5. Single Pulse Maximum Inductive
Switching Energy vs. Time in Clamp
12
TA = 25°C
8V
VDS = 10 V
25°C
8
10 6 V
100°C
ID (A)
ID (A)
−40°C
10
10 V
12 7 V
10
TIME IN CLAMP (ms)
4V
8
5V
6
3V
6
150°C
4
4
0
2
VGS = 2.5 V
2
0
1
2
3
4
0
5
1
VDS (V)
Figure 6. Output Characteristics
2
3
VGS (V)
4
Figure 7. Transfer Characteristics
http://onsemi.com
4
5
NCV8405
TYPICAL PERFORMANCE CURVES
300
210
150°C, ID = 1.4 A
250
190
150°C, VGS = 10 V
200
150
RDS(on) (mW)
RDS(on) (mW)
170
150°C, ID = 0.5 A
100°C, ID = 1.4 A
100°C, ID = 0.5 A
100
50 −40°C, ID = 0.5 A
3
4
5
8
100°C, VGS = 10 V
25°C, VGS = 5 V
9
50
0.5
10
Figure 8. RDS(on) vs. Gate−Source Voltage
RDS(on) (VGS = 5 V, TJ = 25°C)(NORMALIZED)
100°C, VGS = 5 V
110
−40°C, VGS = 5 V
−40°C, VGS = 10 V
70
25°C, ID = 0.5 A
6
7
VGS (V)
130
90
25°C, ID = 1.4 A
−40°C, ID = 1.4 A
150°C, VGS = 10 V
150
1
1.5
2
25°C, VGS = 10 V
2.5
3
ID (A)
3.5
4
4.5
5
Figure 9. RDS(on) vs. Drain Current
15
2.0
VDS = 10 V
ID = 1.4 A
1.75
13
VGS = 5 V
11
ILIM (A)
1.5
1.25
1.0
−40°C
25°C
9
100°C
7
VGS = 10 V
150°C
5
0.75
0.5
−40
−20
0
20
40
60
T (°C)
80
100 120
3
140
5
6
7
8
9
10
VGS (V)
Figure 10. Normalized RDS(on) vs. Temperature
Figure 11. Current Limit vs. Gate−Source
Voltage
10
VGS = 0 V
14
150°C
1
IDSS (mA)
ILIM (A)
12
VGS = 10 V
10
0.1
8
VGS = 5 V
0.01
100°C
−40°C
25°C
6
VDS = 10 V
4
−40 −20 0
20
40
60
80
0.001
10
100 120 140 160
15
20
25
30
35
TJ (°C)
VDS (V)
Figure 12. Current Limit vs. Junction
Temperature
Figure 13. Drain−to−Source Leakage Current
http://onsemi.com
5
40
NCV8405
TYPICAL PERFORMANCE CURVES
1.1
ID = 150 mA
VGS = VDS
1.1
1
−40°C
25°C
0.9
1
VSD (V)
NORMALIZED VGS(th) (V)
1.2
0.9
0.8
100°C
0.8
0.7
150°C
0.6
0.7
0.5
0.6
−40
0.4
−20
0
20
40
60
80
100
120
140
VGS = 0 V
1
2
3
4
5
T (°C)
200
TIME (ms)
100
ID = 2.5 A
VDD = 12 V
RG = 0 W
tr
td(off)
50
tf
td(on)
0
3
4
5
6
7
VGS (V)
8
9
10
75
50
td(off), (VGS = 10 V)
tf, (VGS = 5 V)
25 t
d(on), (VGS = 10 V) t , (V
r
GS = 10 V)
0
0
tr, (VGS = 5 V)
tf, (VGS = 10 V)
td(off), (VGS = 5 V)
td(on), (VGS = 5 V)
9
10
ID = 2.5 A
VDD = 12 V
RG = 0 W
1.000
−dVDS/dt(on)
0.500
dVDS/dt(off)
0.000
3
4
5
6
7
VGS (V)
8
9
10
Figure 17. Resistive Load Switching
Drain−Source Voltage Slope vs. Gate−Source
Voltage
DRAIN−SOURCE VOLTAGE SLOPE (V/ms)
TIME (ms)
100
ID = 2.5 A
VDD = 12 V
8
1.500
Figure 16. Resistive Load Switching Time vs.
Gate−Source Voltage
125
7
Figure 15. Body−Diode Forward
Characteristics
DRAIN−SOURCE VOLTAGE SLOPE (V/ms)
Figure 14. Normalized Threshold Voltage vs.
Temperature
150
6
IS (A)
200 400 600 800 1000 1200 1400 1600 1800 2000
RG (W)
1.5
1.3
−dVDS/dt(on), VGS = 10 V
1.1
0.9
0.7
0.5
dVDS/dt(off), VGS = 5 V
0.3
dVDS/dt(off), VGS = 10 V
−dVDS/dt(on), VGS = 5 V
ID = 2.5 A
VDD = 12 V
0.1
−0.1
0
Figure 18. Resistive Load Switching Time vs.
Gate Resistance
500
1000
RG (W)
1500
200
Figure 19. Drain−Source Voltage Slope during
Turn On and Turn Off vs. Gate Resistance
http://onsemi.com
6
NCV8405
TYPICAL PERFORMANCE CURVES
100
20%
10%
10
5%
2%
1
1%
0.1
0.01
0.000001
Single Pulse
0.00001
0.0001
0.001
0.01
0.1
1
10
PULSE WIDTH (sec)
Figure 20. Transient Thermal Resistance
140
TA 25°C
120
qJA Curve with PCB cu thk 1.0 oz
100
qJA (°C/W)
RqJA 1” SQ 1 Oz COPPER
50% Duty Cycle
80
60
qJA Curve with PCB cu thk 2.0 oz
40
20
0
0
100
200
300
400
500
COPPER HEAT SPREADER AREA
Figure 21. qJA vs. Copper
http://onsemi.com
7
600
(mm2)
700
100
1000
NCV8405
TEST CIRCUITS AND WAVEFORMS
RL
VIN
+
D
RG
VDD
G DUT
−
S
IDS
Figure 22. Resistive Load Switching Test Circuit
90%
VIN
10%
td(ON)
tr
td(OFF)
tf
90%
10%
IDS
Figure 23. Resistive Load Switching Waveforms
http://onsemi.com
8
NCV8405
TEST CIRCUITS AND WAVEFORMS
L
VDS
VIN
D
RG
+
VDD
G DUT
−
S
tp
IDS
Figure 24. Inductive Load Switching Test Circuit
5V
VIN
0V
Tav
Tp
V(BR)DSS
Ipk
VDD
VDS
VDS(on)
IDS
0
Figure 25. Inductive Load Switching Waveforms
http://onsemi.com
9
NCV8405
PACKAGE DIMENSIONS
SOT−223 (TO−261)
CASE 318E−04
ISSUE M
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
D
b1
DIM
A
A1
b
b1
c
D
E
e
e1
L1
HE
4
HE
E
1
2
3
b
e1
e
0.08 (0003)
C
q
A
A1
L1
MILLIMETERS
NOM
MAX
1.63
1.75
0.06
0.10
0.75
0.89
3.06
3.20
0.29
0.35
6.50
6.70
3.50
3.70
2.30
2.40
0.94
1.05
1.75
2.00
7.00
7.30
10°
−
q
MIN
1.50
0.02
0.60
2.90
0.24
6.30
3.30
2.20
0.85
1.50
6.70
0°
STYLE 3:
PIN 1.
2.
3.
4.
GATE
DRAIN
SOURCE
DRAIN
MIN
0.060
0.001
0.024
0.115
0.009
0.249
0.130
0.087
0.033
0.060
0.264
0°
INCHES
NOM
0.064
0.002
0.030
0.121
0.012
0.256
0.138
0.091
0.037
0.069
0.276
−
MAX
0.068
0.004
0.035
0.126
0.014
0.263
0.145
0.094
0.041
0.078
0.287
10°
SOLDERING FOOTPRINT*
3.8
0.15
2.0
0.079
2.3
0.091
2.3
0.091
6.3
0.248
2.0
0.079
1.5
0.059
SCALE 6:1
mm Ǔ
ǒinches
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
HDPlus is a trademark of Semiconductor Components Industries, LLC (SCILLC).
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5773−3850
http://onsemi.com
10
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
NCV8405/D