TIPP115, TIPP116, TIPP117 PNP SILICON POWER DARLINGTONS Copyright © 1997, Power Innovations Limited, UK ● 20 W Pulsed Power Dissipation ● 100 V Capability ● 2 A Continuous Collector Current ● MAY 1989 - REVISED MARCH 1997 LP PACKAGE (TOP VIEW) E 1 2 3 C 4 A Peak Collector Current B MDTRAB absolute maximum ratings at 25°C case temperature (unless otherwise noted) RATING SYMBOL TIPP115 Collector-base voltage (IE = 0) TIPP116 VCBO -80 V -100 TIPP115 TIPP116 UNIT -60 TIPP117 Collector-emitter voltage (IB = 0) VALUE -60 VCEO TIPP117 -80 V -100 V EBO -5 V IC -2 A ICM -4 A IB -50 mA Continuous device dissipation at (or below) 25°C case temperature (see Note 2) Ptot 0.8 W Pulsed power dissipation (see Note 3) PT 20 W °C Emitter-base voltage Continuous collector current Peak collector current (see Note 1) Continuous base current Operating junction temperature range Storage temperature range Lead temperature 3.2 mm from case for 10 seconds Tj -55 to +150 Tstg -55 to +150 °C TL 260 °C NOTES: 1. This value applies for tp ≤ 0.3 ms, duty cycle ≤ 10%. 2. Derate linearly to 150°C case temperature at the rate of 0.32 W/°C. 3. VCE = 20 V, IC = 1 A, PW = 10 ms, duty cycle ≤ 2%. PRODUCT INFORMATION Information is current as of publication date. Products conform to specifications in accordance with the terms of Power Innovations standard warranty. Production processing does not necessarily include testing of all parameters. 1 TIPP115, TIPP116, TIPP117 PNP SILICON POWER DARLINGTONS MAY 1989 - REVISED MARCH 1997 electrical characteristics at 25°C case temperature PARAMETER V (BR)CEO ICEO ICBO IEBO hFE VCE(sat) VBE VEC TEST CONDITIONS Collector-emitter breakdown voltage Collector-emitter cut-off current Collector-base cut-off current Emitter cut-off current MIN TIPP115 IC = -10 mA IB = 0 (see Note 4) TYP MAX TIPP116 -80 TIPP117 -100 VCE = -30 V VBE = 0 TIPP115 -2 V BE = 0 TIPP116 -2 V CE = -50 V V BE = 0 TIPP117 -2 VCE = -60 V IB = 0 TIPP115 -1 V CE = -80 V IB = 0 TIPP116 -1 V CE = -100 V IB = 0 TIPP117 -1 VEB = IC = 0 mA mA -2 mA Forward current VCE = -4 V IC = -1 A transfer ratio V CE = -4 V IC = -2 A -8 mA IC = -2 A (see Notes 4 and 5) -2.5 V VCE = -4 V IC = -2 A (see Notes 4 and 5) -2.8 V IE = -4 A IB = 0 (see Notes 4 and 5) -3.5 V Collector-emitter saturation voltage Base-emitter voltage Parallel diode forward voltage IB = (see Notes 4 and 5) 1000 500 NOTES: 4. These parameters must be measured using pulse techniques, tp = 300 µs, duty cycle ≤ 2%. 5. These parameters must be measured using voltage-sensing contacts, separate from the current carrying contacts. PRODUCT 2 V V CE = -40 V -5 V UNIT -60 INFORMATION TIPP115, TIPP116, TIPP117 PNP SILICON POWER DARLINGTONS MAY 1989 - REVISED MARCH 1997 MECHANICAL DATA LP003 (TO-92) 3-pin cylindical plastic package This single-in-line package consists of a circuit mounted on a lead frame and encapsulated within a plastic compound. The compound will withstand soldering temperature with no deformation, and circuit performance characteristics will remain stable when operated in high humidity conditions. Leads require no additional cleaning or processing when used in soldered assembly. LP003 Falls Within JEDEC TO-226AA Dimensions LP003 (TO-92) 5,21 4,44 4,19 3,17 3,43 MIN. 2,67 2,03 2,67 2,03 5,34 4,32 Seating Plane 1,27 (see Note A) 12,7 MIN. 0,56 0,40 1 1,40 1,14 3 2 0,41 0,35 2,67 2,41 ALL LINEAR DIMENSIONS IN MILLIMETERS NOTE A: Lead dimensions are not controlled in this area. PRODUCT MDXXAX INFORMATION 3 TIPP115, TIPP116, TIPP117 PNP SILICON POWER DARLINGTONS MAY 1989 - REVISED MARCH 1997 MECHANICAL DATA LP003 (TO-92) 3-pin cylindical plastic package This single-in-line package consists of a circuit mounted on a lead frame and encapsulated within a plastic compound. The compound will withstand soldering temperature with no deformation, and circuit performance characteristics will remain stable when operated in high humidity conditions. Leads require no additional cleaning or processing when used in soldered assembly. LP003 (TO-92) - Formed Leads Version LP003 Falls Within JEDEC TO-226AA Dimensions 5,21 4,44 4,19 3,17 3,43 MIN. 2,67 2,03 2,67 2,03 5,34 4,32 4,00 MAX. 0,56 0,40 1 2 3 2,90 2,40 0,41 0,35 2,90 2,40 ALL LINEAR DIMENSIONS IN MILLIMETERS MDXXAR PRODUCT 4 INFORMATION TIPP115, TIPP116, TIPP117 PNP SILICON POWER DARLINGTONS MAY 1989 - REVISED MARCH 1997 MECHANICAL DATA LPR tape dimensions LP Package (TO-92) Tape (Formed Lead Version) 5,21 4,44 4,19 3,17 3,43 MIN. 2,67 2,03 2,67 2,03 5,34 4,32 4,00 MAX. 0,56 0,40 0,41 0,35 13,70 11,70 32,00 23,00 27,68 17,66 0,50 0,00 2,50 MIN. 16,50 15,50 11,00 8,50 9,75 8,50 2,90 2,40 2,90 2,40 19,00 5,50 19,00 17,50 ø 4,30 3,70 6,75 5,95 13,00 12,40 ALL LINEAR DIMENSIONS IN MILLIMETERS MDXXAS PRODUCT INFORMATION 5 TIPP115, TIPP116, TIPP117 PNP SILICON POWER DARLINGTONS MAY 1989 - REVISED MARCH 1997 IMPORTANT NOTICE Power Innovations Limited (PI) reserves the right to make changes to its products or to discontinue any semiconductor product or service without notice, and advises its customers to verify, before placing orders, that the information being relied on is current. PI warrants performance of its semiconductor products to the specifications applicable at the time of sale in accordance with PI's standard warranty. Testing and other quality control techniques are utilized to the extent PI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except as mandated by government requirements. PI accepts no liability for applications assistance, customer product design, software performance, or infringement of patents or services described herein. Nor is any license, either express or implied, granted under any patent right, copyright, design right, or other intellectual property right of PI covering or relating to any combination, machine, or process in which such semiconductor products or services might be or are used. PI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, INTENDED, AUTHORIZED, OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT APPLICATIONS, DEVICES OR SYSTEMS. Copyright © 1997, Power Innovations Limited PRODUCT 6 INFORMATION