Transistors IC SMD Type Product specification KI4544DY PIN Configuration Absolute Maximum Ratings TA = 25 Parameter Symbol N-Channel P-Channel Drain-Source Voltage VDS 30 Gate-Source Voltage VGS Continuous Drain Current (TJ = 150 )* TA = 25 ID TA = 70 Pulsed Drain Current IDM Continuous Source Current (Diode Conduction)* Maximum Power Dissipation* TA = 25 IS PD TA = 70 Operating Junction and Storage Temperature Range Maximum Junction-to-Ambient * *Surface Mounted on FR4 Board, t http://www.twtysemi.com Unit -30 V 20 20 V 6.5 5.7 A 5.4 4.0 A 20 20 A -1.7 A 1.7 2.4 W 1.5 W TJ, Tstg -55 to 150 RthJA 52 /W 10 sec. [email protected] 4008-318-123 1 of 2 Transistors IC SMD Type Product specification KI4544DY Electrical Characteristics TJ = 25 Parameter Gate Threshold Voltage VGS( th) Gate Body Leakage IGSS Zero Gate Voltage Drain Current On State Drain Currenta IDSS ID(on) Drain Source On State Resistance* rDS(on) Forward Transconductance* gfs Diode Forward Voltage* VSD Total Gate Charge Qg Gate Source Charge Qgs Gate Drain Charge Qgd Turn On Time td(on) tr Rise Time td( off) Turn Off Delay Time Fall Time tf Source-Drain Reverse Recovery Time trr * Pulse test; pulse width Testconditons Symbol Min VDS = VGS, ID = 250 A N-Ch 1 VDS = VGS, ID = -250 P-Ch -1 A Typ Max V VDS = 0 V VGS = 20 V N-Ch 100 VDS = 0 V VGS = 20 V P-Ch 100 VDS = 30V, VGS = 0 V N-Ch 1 VDS = -30V, VGS = 0 V P-Ch -1 VDS = 30 V, VGS = 0 V, TJ = 55 N-Ch 5 VDS = -30V, VGS = 0 V, TJ = 55 P-Ch -5 VDS 5 V, VGS = 10 V N-Ch 20 VDS -5 V, VGS = -10 V P-Ch -20 VDS 5 V, VGS =4.5 V N-Ch 5 VDS -5 V, VGS = -4.5 V P-Ch -5 N-Ch 0.027 0.035 P-Ch 0.036 0.045 VGS = 4.5 V, ID = 5.4A N-Ch 0.038 0.050 VGS = -4.5 V, ID = -4.0A P-Ch 0.060 0.090 VDS = 15 V, ID = 6.5A N-Ch 15 VDS = -15 V, ID = -5.7A P-Ch 9 IS = 1.7A, VGS = 0 V N-Ch 0.75 1.2 IS = -1.7A, VGS = 0 V P-Ch -0.75 -1.2 N-Channel N-Ch 18 35 VDS = 15 V, VGS = 10V, ID = 6.5A P-Ch 19 40 S N-Ch 4.2 P-Channel P-Ch 4.5 VDS = -15 V, VGS = -10 V, ID = -5.7A N-Ch 3.5 P-Ch 3.6 N-Ch 13 30 VDD = 15 V, RL = 15 P-Ch 13 30 ID= 1A, VGEN = 10V, Rg = 6 N-Ch 12 30 P-Ch 15 30 N-Ch 31 60 VDD = -15 V, RL = 15 P-Ch 37 70 ID= -1 A, VGEN = -10 V, Rg = 6 N-Ch 10 30 P-Ch 14 30 N-Ch 30 70 P-Ch 35 70 IF = -1.7 A, di/dt = 100 A/ s V nC P-Channel s A A VGS = 10 V, ID = 6.5A IF = 1.7 A, di/dt = 100 A/ nA A VGS = -10 V, ID = -5.7A N Channel Unit ns 300 s, duty cycle 2%. http://www.twtysemi.com [email protected] 4008-318-123 2 of 2