MMBT2369A NPN Switching Transistor Description 3 This device is designed for high speed saturated switching at collector currents of 10 mA to 100 mA. Sourced from process 21. 2 1 SOT-23 1. Base 2. Emitter 3. Collector Ordering Information Part Number Marking Package Packing Method MMBT2369A 1S SOT-23 3L Tape and Reel Absolute Maximum Ratings(1),(2) Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Values are at TA = 25°C unless otherwise noted. Symbol Value Unit VCEO Collector-Emitter Voltage 15 V VCBO Collector-Base Voltage 40 V VEBO Emitter-Base Voltage 4.5 V Collector Current - Continuous 200 mA -55 to +150 °C IC TJ, TSTG Parameter Operating and Storage Junction Temperature Range Notes: 1. These ratings are based on a maximum junction temperature of 150°C. 2. These are steady-state limits. Fairchild Semiconductor should be consulted on applications involving pulsed or low-duty-cycle operations. © 1997 Fairchild Semiconductor Corporation MMBT2369A Rev. 1.1.0 www.fairchildsemi.com MMBT2369A — NPN Switching Transistor November 2014 Values are at TA = 25°C unless otherwise noted. Symbol PD RqJA Parameter Value Unit 225 mW Derate Above 25°C 1.8 mW/°C Thermal Resistance, Junction-to-Ambient 556 °C/W Total Device Dissipation Note: 3. Device is mounted on FR-4 PCB 1.6 inch X 1.6 inch X 0.06 inch. Electrical Characteristics Values are at TA = 25°C unless otherwise noted. Symbol Parameter BVCEO Collector-Emitter Breakdown Voltage(4) Conditions IC = 10 mA, IB = 0 Min. Max. 15 Unit V BVCES Collector-Emitter Breakdown Voltage IC = 10 μA, VBE = 0 40 V BVCBO Collector-Base Breakdown Voltage IC = 10 μA, IE = 0 40 V BVEBO Emitter-Base Breakdown Voltage IE = 10 μA, IC = 0 4.5 V ICBO hFE VCE(sat) Collector Cut-Off Current DC Current Gain(4) Collector-Emitter Saturation Voltage(4) VCB = 20 V, IE = 0 0.4 VCB = 20 V, IE = 0, TA = 125°C 30 IC = 10 mA, VCE = 1.0 V 40 IC = 10 mA, VCE = 0.35 V, TA = -55°C 20 IC = 100 mA, VCE = 1.0 V 20 0.20 IC = 10 mA, IB = 1.0 mA, TA = 125°C 0.30 IC = 30 mA, IB = 3.0 mA 0.25 IC = 100 mA, IB = 10 mA 0.50 0.70 IC = 10 mA, IB = 1.0 mA, TA = -55°C VBE(sat) Base-Emitter Saturation Voltage 120 IC = 10 mA, IB = 1.0 mA IC = 10 mA, IB = 1.0 mA IC = 10 mA, IB = 1.0 mA, TA = 125°C μA V 0.85 1.02 V 0.59 IC = 30 mA, IB = 3.0 mA 1.15 IC = 100 mA, IB = 10 mA 1.60 Cobo Output Capacitance VCB = 5.0 V, IE = 0, f = 1.0 MHz 4.0 pF Cibo Input Capacitance VEB = 0.5 V, IC = 0, f = 1.0 MHz 5.0 pF hfe Small-Signal Current Gain IC = 10 mA, VCE = 10 V RG = 2.0 kΩ, f = 100 MHz ts Storage Time IB1 = IB2 = IC = 10 mA 13 ns ton Turn-On Time VCC = 3.0 V, IC = 10 mA, IB1 = 3.0 mA 12 ns toff Turn-Off Time VCC = 3.0 V, IC = 10 mA, IB1 = 3.0 mA, IB2 = 1.5 mA 18 ns 5.0 Note: 4. Pulse test: Pulse width ≤ 300 μs, duty cycle ≤ 2% © 1997 Fairchild Semiconductor Corporation MMBT2369A Rev. 1.1.0 www.fairchildsemi.com 2 MMBT2369A — NPN Switching Transistor Thermal Characteristics(3) V CESAT - COLLE CTOR-EMITTER VOLTAGE (V) VC E = 1.0V 150 125 ° C 100 25 ° C 50 - 40 °C h FE - DC CURRENT GAIN 200 0.01 IC 0.1 1 10 - COLLECTOR CURRENT (mA) 100 1.4 β = 10 1.2 1 0.8 0.6 0.4 - 40 °C 25 °C 125 °C 0.1 IC 1 10 100 - COLLE CTOR CURRENT ( mA) 0.3 25 °C 0.2 - 40 °C 0 0.1 1 10 100 I C - COLLECTOR CURRENT (mA) 500 300 1 - 40°C 0.8 25 °C 125 °C 0.6 0.4 V CE= 1.0V 0.2 0.1 1 10 I C - COLLECTOR CURRENT (mA) 100 Figure 4. Base-Emitter On Voltage vs. Collector Current 5 600 F = 1.0MHz V CB = 20V CAPACITANCE (pF) I CBO - COLLECTOR CURRENT (nA) 125 °C 0.1 Figure 3. Base-Emitter Saturation Voltage vs. Collector Current 100 10 1 25 β = 10 0.4 Figure 2. Collector-Emitter Saturation Voltage vs. Collector Current V BE(O N) - BASE-E MITTER ON VOLTAGE (V) V BESAT- BASE-EMITTER VOLTAG E (V) Figure 1. DC Current Gain vs. Collector Current 0.5 50 75 100 125 T A - AMBIENT TE MPERATURE (°C) C ibo 3 C obo 2 1 0 0.1 150 Figure 5. Collector Cut-Off Current vs. Ambient Temperature © 1997 Fairchild Semiconductor Corporation MMBT2369A Rev. 1.1.0 4 0.5 1 5 10 REVERSE BIAS VOLTAGE (V) 50 Figure 6. Output Capacitance vs. Reverse Bias Voltage www.fairchildsemi.com 3 MMBT2369A — NPN Switching Transistor Typical Performance Characteristics 12 VCC = 3.0 V I C = 10 I B1 = I B2 = 10 50 tsf S WITCHING TIMES ( ns) SWITCHING TIMES (ns) 100 20 tsr 10 5 t sf 2 tss ts d 1 2 5 10 20 50 100 I C - COLLECTOR CURRENT (mA) 10 tss 8 6 tsd 4 tsr 2 I C= 10 mA, I B1 = 3.0 mA, I B2 = 1.5 mA, VCC = 3.0 V 0 25 300 T -12 I C = 10 mA VCC = 3.0 V -10 -8 t s= 3.0 ns -6 4.0 ns -4 -2 0 6.0 ns 0 2 4 6 8 I B1 - TURN ON BASE CURRENT (mA) 10 -30 C VCC = 3.0 V -20 t S= 3.0 ns 8.0 ns t f = 7.0 ns -3 -2 10 ns -1 0 0 2 I B1 4 6 8 - TURN ON BASE CURRENT (mA) 10 Figure 11. Fall Time vs. Turn-On and Turn-Off Base Currents © 1997 Fairchild Semiconductor Corporation MMBT2369A Rev. 1.1.0 4.0 ns 8.0 ns 6.0 ns -15 -10 I B2 - TURN OFF BASE CURRENT (mA) I B2 - TURN OFF BASE CURRENT (mA) VCC = 3.0 V -4 100 16.0 ns -5 0 0 5 10 15 20 25 I B1 - TURN ON BASE CURRENT (mA) 30 Figure 10. Storage Time vs. Turn-On and Turn-Off Base Currents I C = 10 mA -5 I = 100 mA -25 Figure 9. Storage Time vs. Turn-On and Turn-Off Base Currents -6 50 75 - AMBIENT TE MPERATURE (°C) Figure 8. Switching Times vs. Ambient Temperature I B2 - TURN OFF BASE CURRENT (mA) I B2 - TURN OFF BASE CURRENT (mA) Figure 7. Switching Times vs. Collector Current A -12 I C= 30 mA VCC = 3.0 V -10 -8 3.0 ns 4.0 ns t f = 2.0 ns -6 5.0 ns -4 -2 0 0 2 4 6 8 10 I B1 - TURN ON BASE CURRENT (mA) 12 Figure 12. Fall Time vs. Turn-On and Turn-Off Base Currents www.fairchildsemi.com 4 MMBT2369A — NPN Switching Transistor Typical Performance Characteristics (Continued) I C = 100 mA 3.0 ns VCC = 3.0 V -25 -20 V BE(O)- BASE-EMITTER OFF VOLTAGE (V) I B2 - TURN OFF BASE CURRENT (mA) -30 4.0 ns t f = 2.0 ns 8.0 ns -15 12.0 ns -10 -5 0 0 5 I B1 10 15 20 25 - TURN ON BASE CURRENT (mA) 30 t r= 2.0 ns 5.0 ns 1 20 ns 10 ns 0 1 10 100 I C - COLLE CTOR CURRENT (mA) 500 Figure 15. Rise Time vs. Turn-On Base Current and Collector Current © 1997 Fairchild Semiconductor Corporation MMBT2369A Rev. 1.1.0 t d = 8.0 ns -4 5.0 ns -3 4.0 ns -2 3.0 ns -1 P D - POW ER DISSIPATION (mW) - TURN ON BASE CURRENT (mA) B1 I VCC = 3.0 V 10 I C = 10 mA V CC = 3.0 V -5 0 1 2 5 10 20 I B1 - TURN ON BASE CURRENT (mA) 50 Figure 14. Delay Time vs. Base-Emitter Off Voltage and Turn-On Base Current Figure 13. Fall Time vs. Turn-On and Turn-Off Base Currents 50 -6 500 400 TO-92 300 200 SOT-23 100 0 0 25 50 75 100 TE MPE RATURE ( °C) 125 150 Figure 16. Power Dissipation vs. Ambient Temperature www.fairchildsemi.com 5 MMBT2369A — NPN Switching Transistor Typical Performance Characteristics (Continued) MMBT2369A — NPN Switching Transistor Physical Dimensions 0.95 2.92±0.20 3 1.40 1.30+0.20 -0.15 1 2.20 2 0.60 0.37 (0.29) 0.95 0.20 1.00 A B 1.90 1.90 LAND PATTERN RECOMMENDATION SEE DETAIL A 1.20 MAX 0.10 0.00 (0.93) 0.10 C C 2.40±0.30 NOTES: UNLESS OTHERWISE SPECIFIED GAGE PLANE 0.23 0.08 A) REFERENCE JEDEC REGISTRATION TO-236, VARIATION AB, ISSUE H. B) ALL DIMENSIONS ARE IN MILLIMETERS. C) DIMENSIONS ARE INCLUSIVE OF BURRS, MOLD FLASH AND TIE BAR EXTRUSIONS. D) DIMENSIONING AND TOLERANCING PER ASME Y14.5M - 1994. E) DRAWING FILE NAME: MA03DREV10 0.25 0.20 MIN (0.55) SEATING PLANE SCALE: 2X Figure 17. 3-LEAD, SOT23, JEDEC TO-236, LOW PROFILE © 1997 Fairchild Semiconductor Corporation MMBT2369A Rev. 1.1.0 www.fairchildsemi.com 6 TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks. F-PFS¥ FRFET® SM Global Power Resource GreenBridge¥ Green FPS¥ Green FPS¥ e-Series¥ Gmax¥ GTO¥ IntelliMAX¥ ISOPLANAR¥ Making Small Speakers Sound Louder and Better™ MegaBuck¥ MICROCOUPLER¥ MicroFET¥ MicroPak¥ MicroPak2¥ MillerDrive¥ MotionMax¥ MotionGrid® MTi® MTx® MVN® mWSaver® OptoHiT¥ OPTOLOGIC® AccuPower¥ Awinda® AX-CAP®* BitSiC¥ Build it Now¥ CorePLUS¥ CorePOWER¥ CROSSVOLT¥ CTL¥ Current Transfer Logic¥ DEUXPEED® Dual Cool™ EcoSPARK® EfficientMax¥ ESBC¥ ® Fairchild® Fairchild Semiconductor® FACT Quiet Series¥ FACT® FAST® FastvCore¥ FETBench¥ FPS¥ OPTOPLANAR® ® PowerTrench® PowerXS™ Programmable Active Droop¥ QFET® QS¥ Quiet Series¥ RapidConfigure¥ ¥ Saving our world, 1mW/W/kW at a time™ SignalWise¥ SmartMax¥ SMART START¥ Solutions for Your Success¥ SPM® STEALTH¥ SuperFET® SuperSOT¥-3 SuperSOT¥-6 SuperSOT¥-8 SupreMOS® SyncFET¥ Sync-Lock™ ®* ® TinyBoost TinyBuck® TinyCalc¥ TinyLogic® TINYOPTO¥ TinyPower¥ TinyPWM¥ TinyWire¥ TranSiC¥ TriFault Detect¥ TRUECURRENT®* μSerDes¥ UHC® Ultra FRFET¥ UniFET¥ VCX¥ VisualMax¥ VoltagePlus¥ XS™ Xsens™ ❺™ * Trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. TO OBTAIN THE LATEST, MOST UP-TO-DATE DATASHEET AND PRODUCT INFORMATION, VISIT OUR WEBSITE AT HTTP://WWW.FAIRCHILDSEMI.COM. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in cause the failure of the life support device or system, or to affect its accordance with instructions for use provided in the labeling, can be safety or effectiveness. reasonably expected to result in a significant injury of the user. ANTI-COUNTERFEITING POLICY Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com, under Sales Support. Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed applications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Advance Information Formative / In Design Preliminary First Production No Identification Needed Full Production Obsolete Not In Production Definition Datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The datasheet is for reference information only. Rev. I72 © Fairchild Semiconductor Corporation www.fairchildsemi.com