Filename: TFS1643A.doc Version 4.0 Vectron International 09.12.2011 Filter specification TFS 1643A 1/5 Measurement condition Ambient temperature: Input power level: Terminating impedance: Input: Output: 23 0 °C dBm 50 50 Ω Ω Characteristics Remark: The maximum attenuation in the passband is defined as the insertion loss ae. The nominal frequency fN is fixed at 1643,5 MHz without any tolerance or limit. The values of absolute attenuation aabs are guaranteed within the specified temperature ranges. The frequency shift of the filter in the operating temperature range is included in the production tolerance scheme. Data typ. value Insertion loss (OTR2) ae Nominal frequency fN Passband PB 2,2 @ 1884 MHz 3,0 dB MHz (fN – 15,5) MHz … (fN + 13,0) MHz 0,7 dB 1,5 dB aabs Absolute attenuation @ max. 1643,5 Passband variation (OTR2) 1525 MHz dB tolerance / limit … 1559 MHz (OTR) 1670 MHz (OTR2) 1675 MHz (OTR2) … 1952 MHz (OTR) ** Return loss within PB (OTR2) Operating temperature range Operating temperature range 2 OTR OTR2 dB min. 35 dB 4 dB min. 3 dB min. 4 dB 63 dB min. 55 dB 9 dB min. 8 dB - - 40 °C ... + 85°C - - 20 °C ... + 85°C - Storage temperature range Temperature coefficient of frequency 43 TCf * -42 - 40 °C ... + 85°C ppm/K *) ∆fc(Hz) = Tcf(ppm/K) x (T - To) x fCAT (MHz) **) guaranteed values have to be understood as sloping lines between the given attenuation value and the attenuation value of the following point or segment Generated: Checked / Approved: Vectron International GmbH & Co. KG Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH & Co. KG reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: TFS1643A.doc Version 4.0 Vectron International 09.12.2011 Filter specification TFS 1643A 2/5 Filter characteristic 0 0 -10 -20 magnitude in dB magnitude in dB -2 -4 -6 -30 -40 -50 -60 -70 -8 -80 -10 1605 1615 1625 1635 1645 1655 frequency in MHz 1665 -90 1675 1000 1200 1400 1600 1800 frequency in MHz 2000 2200 Construction and pin connection (All dimensions in mm) 5 6 4 1,2 Max. H43A ● B50 2 1 Ground Input Ground Ground Output Ground Date code: B C D ... Year + week 2011 2012 2013 3 Date code 3 0,75 0,30X0,30 1 3,0 +/-0,15 1 2 3 4 5 6 6 0,6 4 0,6 50 Ohm Test circuit L1 2 5 L2 SAW 1, 3, 4, 6 Vectron International GmbH & Co. KG Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH & Co. KG reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: TFS1643A.doc Version 4.0 Vectron International 09.12.2011 Filter specification TFS 1643A 3/5 Stability characteristics, reliability After the following tests the filter shall meet the whole specification: 1. Shock: 500g, 1 ms, half sine wave, 3 shocks each plane; DIN IEC 68 T2 - 27 2. Vibration: 10 Hz to 500 Hz, 0,35 mm or 5 g respectively, 1 octave per min, 10 cycles per plan, 3 plans; DIN IEC 68 T2 - 6 3. Change of temperature: 4. Resistance to solder heat (reflow): -55 °C to 125°C / 30 min. each / 10 cycles DIN IEC 68 part 2 – 14 Test N reflow possible: three times max.; for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4; This filter is RoHS compliant (2002/95/EG, 2005/618/EG) Packing Tape & Reel: IEC 286 – 3, with exception of value for N and minimum bending radius; tape type II, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: reel of empty components at start: reel of empty components at start including leader: trailer: 3000 min. 300 mm min. 500 mm min. 300 mm Pull Off Direction Tape (all dimensions in mm) W : 8,00 ± 0,3 Po : 4,00 ± 0,1 Do : 1,50 +0,1/-0 E : 1,75 ± 0,1 F : 3,50 ± 0,05 G(min) : 0,75 P2 : 2,00 ± 0,05 P1 : 4,00 ± 0,1 D1(min) : 1,50 Ao : 3,25 ± 0,1 Bo : 3,25 ± 0,1 Ct : 5,3 ± 0,1 P1 t PIN Marker Po P2 W G Ct Bo F G E Do Ko Date Code Typ D1 Ao W 2 Reel (all dimensions in mm) A : 180 W1 : 8,4 +1,5/-0 W2(max) : 14,4 N(min) : 60 C : 13,0 ± 0,2 C A N W 1 The minimum bending radius is 45 mm. Vectron International GmbH & Co. KG Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH & Co. KG reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: TFS1643A.doc Version 4.0 Vectron International 09.12.2011 Filter specification TFS 1643A 4/5 Air reflow temperature conditions Conditions Average ramp-up rate (30°C to 217°C) > 100°C > 150°C > 217°C Peak temperature Time within 5°C of actual peak temperature Cool-down rate (Peak to 50°C) Time from 30°C to Peak temperature Exposure less than 3°C/second between 300 and 600 seconds between 240 and 500 seconds between 30 and 150 seconds max. 260°C between 10 and 30 seconds less than 6°C/second no greater than 300 seconds Chip-mount air reflow profile Temperature / °C max. 260°C 217°C max. 300 s 10 ... 30 s Time / s 30 ... 150 s Vectron International GmbH & Co. KG Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH & Co. KG reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: TFS1643A.doc Vectron International Version 4.0 Filter specification 09.12.2011 TFS 1643A 5/5 History Version Reason of Changes Name Date 1.0 - Generation of development specification S.Springfeldt 05.05.2011 2.0 - Frequency limits of passband changed - Limits for absolute attenuation updated (1670 – 1675 MHz) A. Molke 01.07.2011 3.0 - Second operating temperature range introduced A. Molke 12.07.2011 3.1 - Change from development spec to filter spec - Typical values added - Filter characteristic added A. Molke 03.08.2011 4.0 - Limits for absolute attenuation updated (1670 – 1675 MHz) - Typical values updated A. Molke 09.12.2011 Vectron International GmbH & Co. KG Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH & Co. KG reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.