CM1400E3U-24NF Mega Power Chopper IGBTMOD™ Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 1400 Amperes/1200 Volts TC MEASURED POINTS (THE SIDE OF Cu BASEPLATE) A D G P (8 PLACES) U L H H W K C2E1 C2 C1 G2 E1 E2 G1 X J F S Y CB Z T J E2 F C1 U V E H H H H H H G G AA L R (9 PLACES) M LABEL G2 E2 C2 C2E1 C1 E2 Outline Drawing and Circuit Diagram Dimensions Inches Millimeters Dimensions Inches Millimeters A 5.91 150.0 L 1.36 +0.04/-0.02 34.6 +1.0/-0.5 B 5.10 129.5 M 0.075±0.08 1.9±0.2 0.26 6.5 C 1.67±0.01 42.5±0.25 P D 5.41±0.01 137.5±0.25 R M6 Metric M6 U 0.62 15.7 E 6.54 166.0 F 2.91±0.01 74.0±0.25 V 0.71 18.0 0.75 19.0 G 1.65 42.0 W H 0.55 14.0 X 0.43 11.0 J 1.50±0.01 38.0±0.25 Y 0.83 21.0 K 0.16 4.0 Z 0.41 10.5 AA 0.22 5.5 Housing Type (J.S.T. MFG. CO. LTD) S = VHR-2N T = VHR-5N 09/08 Description: Powerex Chopper IGBTMOD™ Modules are designed for use in switching applications. Each module consists of one IGBT Transistor having a reverseconnected super-fast recovery free-wheel diode and an anodecollector connected super-fast recovery free-wheel diode. All components and interconnects are isolated from the heat sinking baseplate, offering simplified system assembly and thermal management. Features: £ Low Drive Power £ Low VCE(sat) £ Discrete Super-Fast Recovery Free-Wheel Diode £ Isolated Baseplate for Easy Heat Sinking Applications: £ High Power DC Power Supply £ Large DC Motor Drives £ Utility Interface Inverters Ordering Information: Example: Select the complete module number you desire from the table - i.e. CM1400E3U-24NF is a 1200V (VCES), 1400 Ampere Chopper IGBTMOD Power Module. Type Current Rating Amperes VCES Volts (x 50) CM 1400 24 1 Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 CM1400E3U-24NF Mega Power Chopper IGBTMOD™ 1400 Amperes/1200 Volts Absolute Maximum Ratings, Tj = 25°C unless otherwise specified Ratings Junction Temperature Storage Temperature Symbol CM1400E3U-24NF Units Tj -40 to 150 °C Tstg -40 to 125 °C Collector-Emitter Voltage (G-E SHORT) VCES 1200 Volts Gate-Emitter Voltage (C-E SHORT) VGES ±20 Volts IC 1400 Amperes Collector Current DC (TC = 94°C) Peak Collector Current (Pulse, Tj ≤ 150°C) ICM 2800* Amperes Emitter Current (TC = 25°C)** IE 100 Amperes Peak Emitter Current (Pulse)** IEM 200* Amperes Maximum Collector Dissipation (Tj < 150°C, TC = 25°C) PC 3900 Watts Mounting Torque, M6 Mounting Screws – 40 in-lb Mounting Torque, M6 Main Terminal Screw – 40 in-lb Weight (Typical) Isolation Voltage (Main Terminal to Baseplate, AC 1 min.) – 1400 Grams Viso 2500 Volts VRRM 1200 Volts Clamp Diode Part, Tj = 25°C unless otherwise specified Repetitive Peak Reverae Voltage 2 Forward Current (TC = 25°C) IF 1400* Amperes Peak Forward Current (Pulse) IFM 2800* Amperes 09/08 Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 CM1400E3U-24NF Mega Power Chopper IGBTMOD™ 1400 Amperes/1200 Volts Electrical Characteristics, Tj = 25°C unless otherwise specified Characteristics Symbol Collector-Cutoff Current Gate-Emitter Threshold Voltage Test Conditions Min. Typ. Max. Units ICES VCE = VCES, VGE = 0V – – 1 mA VGE(th) IC = 140mA, VCE = 10V 6 7 8 Volts IGES VGE = VGES, VCE = 0V – – 1.5 μA VCE(sat) IC = 1400A, VGE = 15V, Tj = 25°C – 1.8 2.5 Volts (Without Lead Resistance) (Chip) IC = 1400A, VGE = 15V, Tj = 125°C – 2.0 – Volts Module Lead Resistance R(lead) IC = 1400A, Terminal-Chip – 0.286 – mΩ – – 220 nF VCE = 10V, VGE = 0V – – 25 nF – – 4.7 nF – 7200 – nC Gate Leakage Current Collector-Emitter Saturation Voltage Input Capacitance Cies Output Capacitance Coes Reverse Transfer Capacitance Cres Total Gate Charge QG VCC = 600V, IC = 1400A, VGE = 15V td(on) VCC = 600V, IC = 1400A, – – 800 ns tr VGE1 = VGE2 = 15V, – – 300 ns td(off) RG = 0.22Ω, Inductive Load – – 1000 ns tf Switching Operation – – 300 ns Reverse Recovery Time* trr IE = 100A – – 700 ns Reverse Recovery Charge* Qrr – 90 – μC Emitter-Collector Voltage** VEC External Gate Resistance RG Inductive Turn-on Delay Time Load Rise Time Switch Turn-off Delay Time Times Fall Time IE = 100A, VGE = 0V – – 3.0 Volts 0.22 – 2.2 Ω Min. Typ. Max. – – 3.2 – – 700 ns – 90 – μC Clamp Diode Characteristics, Tj = 25°C unless otherwise specified Characteristics Emitter-Collector Voltage (without Lead Resistance) Symbol VFM Test Conditions IF =1400A, Clamp Diode Part Units Volts (Chip) Reverse Recovery Time trr Reverse Recovery Charge Qrr IF =1400A, Clamp Diode Part * Pulse width and repetition rate should be such that the device junction temperature (Tj) does not exceed Tj(max) rating. ** Represents characteristics of the anti-parallel, emitter-to-collector free-wheel diode (FWDi). Thermal and Mechanical Characteristics, Tj = 25°C unless otherwise specified Characteristics Symbol Test Conditions Min. Typ. Max. Thermal Resistance, Junction to Case Rth(j-c)Q Per IGBT 1/2 Module, TC Reference – – 0.032 Units °C/W Thermal Resistance, Junction to Case Rth(j-c)D Per Clamp Diode 1/2 Module, – – 0.053 °C/W Thermal Resistance, Junction to Case Rth(j-c')Q – – 0.014 °C/W Thermal Resistance, Junction to Case Rth(j-c')D Per Clamp Diode 1/2 Module, – – 0.023 °C/W Rth(c-f) Per 1/2 Module, Thermal Grease Applied – 0.016 – °C/W Point per Outline Drawing TC Reference Point per Outline Drawing Per IGBT 1/2 Module, TC Reference Point Under Chip TC Reference Point Under Chip Contact Thermal Resistance 09/08 3 Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 CM1400E3U-24NF Mega Power Chopper IGBTMOD™ 1400 Amperes/1200 Volts OUTPUT CHARACTERISTICS (TYPICAL) 13 12 2000 11 1500 1000 10 500 9 8 0 0 1 2 3 4 5 6 7 8 2500 2000 1500 1000 4 8 12 16 4 3 2 1 0 20 0 500 1000 1500 2000 2500 3000 GATE-EMITTER VOLTAGE, VGE, (VOLTS) COLLECTOR-CURRENT, IC, (AMPERES) COLLECTOR-EMITTER SATURATION VOLTAGE CHARACTERISTICS (TYPICAL) FREE-WHEEL DIODE FORWARD CHARACTERISTICS (TYPICAL) CAPACITANCE VS. VCE (TYPICAL) 104 103 VGE = 0V IC = 1400A 4 IC = 560A IC = 2800A 2 0 4 8 12 16 101 102 1.5 2.0 2.5 3.0 3.5 EMITTER-COLLECTOR VOLTAGE, VEC, (VOLTS) HALF-BRIDGE SWITCHING CHARACTERISTICS (TYPICAL) REVERSE RECOVERY CHARACTERISTICS (TYPICAL) 103 tr tf VCC = 600V VGE = 15V RG = 0.22 Tj = 125°C Inductive Load 103 COLLECTOR CURRENT, IC, (AMPERES) 104 REVERSE RECOVERY TIME, trr, (ns) td(off) trr 101 102 102 103 EMITTER CURRENT, IE, (AMPERES) 100 101 102 GATE CHARGE, VGE Irr VCC = 600V VGE = 15V RG = 0.22 Tj = 25°C Inductive Load Cres COLLECTOR-EMITTER VOLTAGE, VCE, (VOLTS) 103 102 Coes 101 100 10-1 4.0 GATE-EMITTER VOLTAGE, VGE, (VOLTS) td(on) 102 Tj = 25°C Tj = 125°C 102 0.5 1.0 20 104 103 103 Cies 102 101 104 20 GATE-EMITTER VOLTAGE, VGE, (VOLTS) 6 REVERSE RECOVERY CURRENT, Irr, (AMPERES) 8 CAPACITANCE, Cies, Coes, Cres, (nF) Tj = 25°C EMITTER CURRENT, IE, (AMPERES) COLLECTOR-EMITTER SATURATION VOLTAGE, VCE(sat), (VOLTS) 0 VGE = 15V Tj = 25°C Tj = 125°C COLLECTOR-EMITTER VOLTAGE, VCE, (VOLTS) 0 SWITCHING TIME, (ns) 500 0 9 10 10 4 5 VCE = 10V Tj = 25°C Tj = 125°C COLLECTOR-EMITTER SATURATION VOLTAGE, VCE(sat), (VOLTS) 2500 3000 Tj = 25°C VGE = 20V 15 COLLECTOR CURRENT, IC, (AMPERES) COLLECTOR CURRENT, IC, (AMPERES) 3000 COLLECTOR-EMITTER SATURATION VOLTAGE CHARACTERISTICS (TYPICAL) TRANSFER CHARACTERISTICS (TYPICAL) IC = 1400A 16 VCC = 400V VCC = 600V 12 8 4 0 0 2000 4000 6000 8000 10000 GATE CHARGE, QG, (nC) 09/08 Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 10-2 10-1 100 101 10-1 Single Pulse TC = 25°C Per Unit Base Rth(j-c') = 0.014°C/W (IGBT) Rth(j-c') = 0.023°C/W (Clamp) 10-2 10-3 10-5 10-4 SWITCHING LOSS, Eon, Eoff, (mJ/PULSE) 104 COLLECTOR CURRENT, IC, (AMPERES) SWITCHING ENERGY VS. EXTERNAL GATE RESISTANCE (TYPICAL) REVERSE RECOVERY ENERGY VS. EXTERNAL GATE RESISTANCE (TYPICAL) VCC = 600V VGE = 15V Tj = 125°C IC = 1400A Eon Eoff Inductive Load 0.5 1.0 1.5 2.0 EXTERNAL GATE RESISTANCE, RG, () 09/08 103 TIME, (s) 102 0 VCC = 600V VGE = 15V Tj = 125°C RG = 0.22 Eon Eoff Inductive Load 101 100 102 10-3 103 101 102 2.5 REVERSE RECOVERY ENERGY VS. FORWARD CURRENT (TYPICAL) REVERSE RECOVERY ENERGY, Err, (mJ/PULSE) 10-3 SWITCHING LOSS VS. COLLECTOR CURRENT (TYPICAL) 3 10 SWITCHING LOSS, Eon, Eoff, (mJ/PULSE) 100 TRANSIENT THERMAL IMPEDANCE CHARACTERISTICS (IGBT & CLAMP DIODE) REVERSE RECOVERY ENERGY, Err, (mJ/PULSE) NORMALIZED TRANSIENT THERMAL IMPEDANCE, Zth(j-c) Zth = Rthr/03."-*;&%7"-6& CM1400E3U-24NF Mega Power Chopper IGBTMOD™ 1400 Amperes/1200 Volts 103 102 VCC = 600V VGE = 15V Tj = 125°C RG = 0.22 Inductive Load 101 100 102 103 104 FORWARD CURRENT, IF, (AMPERES) 103 102 101 VCC = 600V VGE = 15V Tj = 125°C IC = 1400A Inductive Load 0 0.5 1.0 1.5 2.0 2.5 EXTERNAL GATE RESISTANCE, RG, () 5