STTH15R06D/FP ® TURBO 2 ULTRAFAST HIGH VOLTAGE RECTIFIER MAIN PRODUCT CHARACTERISTICS IF(AV) 15 A VRRM 600 V IRM (typ.) 8A Tj (max) 175 °C VF (max) 1.8 V trr (max) 50 ns A K TO-220FPAC STTH15R06FP FEATURES AND BENEFITS ■ ■ ■ ■ K Ultrafast switching Low reverse recovery current Reduces switching losses Low thermal resistance A DESCRIPTION The STTH15R06D/FP, which is using ST Turbo 2 600V technology, is specially suited as boost diode in continuous mode power factor corrections and hard switching conditions. The device is also intended for use as a free wheeling diode in power supplies and other power switching applications. K TO-220AC STTH15R06D ABSOLUTE RATINGS (limiting values) Symbol Parameter Value Unit VRRM Repetitive peak reverse voltage 600 V IF(RMS) RMS forward current 30 A IF(AV) Average forward current 15 A IFSM Surge non repetitive forward current 120 A Tstg Storage temperature range - 65 + 175 °C + 175 °C Tj tp = 10 ms Maximum operating junction temperature January 2002 - Ed: 1B Sinusoidal 1/6 STTH15R06D/FP THERMAL RESISTANCES Symbol Rth (j-c) Parameter Junction to case Value Unit TO-220AC 1.5 °C/W TO-220FPAC 4.0 STATIC ELECTRICAL CHARACTERISTICS Symbol IR VF Parameter Tests conditions Reverse leakage current VR = 600V Forward voltage drop IF = 15 A Min. Typ. Tj = 25°C Tj = 125°C 70 Tj = 25°C Max. Unit 60 µA 800 2.9 Tj = 125°C 1.4 V 1.8 To evaluate the maximum conduction losses use the following equation : P = 1.16 x IF(AV) + 0.043 IF2(RMS) DYNAMIC ELECTRICAL CHARACTERISTICS Symbol trr Tests conditions IF = 0.5 A Irr = 0.25 A IR = 1A Min. Typ. Tj = 25°C IF = 1 A dIF/dt = - 50 A/µs VR = 30V IRM S factor VR = 400 V IF = 15A dIF/dt = - 200A/µs VFP 2/6 Unit 30 ns 50 Tj = 125°C 7.5 9.0 220 IF = 15 A dIF/dt = 120 A/µs VFR = 1.1 x VFmax A 0.15 Qrr tfr Max. Tj = 25°C nC 200 ns 6 V STTH15R06D/FP Fig. 1: Conduction losses versus average current. Fig. 2: Forward voltage drop versus forward current. P(W) IFM(A) 120 40 δ = 0.2 δ = 0.1 δ = 0.05 δ = 0.5 110 35 Tj=125°C (Maximum values) 100 30 90 δ=1 80 25 Tj=125°C (Typical values) 70 60 20 Tj=25°C (Maximum values) 50 15 40 10 30 T 20 5 IF(av)(A) δ=tp/T 0 0 2 4 6 8 10 12 14 16 10 tp VFM(V) 0 18 0 20 Fig. 3-1: Relative variation of thermal impedance junction to case versus pulse duration (TO-220AC). 1 2 3 4 5 6 Fig. 3-2: Relative variation of thermal impedance junction to case versus pulse duration (TO-220FPAC). Zth(j-c)/Rth(j-c) Zth(j-c)/Rth(j-c) 1.0 1.0 0.9 0.9 0.8 0.8 0.7 0.7 δ = 0.5 0.6 0.6 0.5 δ = 0.5 0.5 0.4 δ = 0.2 0.3 δ = 0.1 0.4 0.3 T 0.2 0.2 Single pulse 0.1 tp(s) 0.0 1.E-03 δ=tp/T δ = 0.2 T δ = 0.1 0.1 tp tp(s) Single pulse δ=tp/T 0.0 1.E-02 1.E-01 1.E+00 Fig. 4: Peak reverse recovery current versus dIF/dt (90% confidence). 1.E-03 1.E-02 1.E-01 tp 1.E+00 1.E+01 Fig. 5: Reverse recovery time versus dIF/dt (90% confidence). IRM(A) trr(ns) 30 100 VR=400V Tj=125°C IF=2 x IF(av) VR=400V Tj=125°C 90 25 80 IF=IF(av) 70 20 IF=0.5 x IF(av) 15 IF=0.5 x IF(av) 60 IF=IF(av) IF=2 x IF(av) 50 IF=0.25 x IF(av) 40 10 30 20 5 10 dIF/dt(A/µs) 0 dIF/dt(A/µs) 0 0 200 400 600 800 1000 0 200 400 600 800 1000 3/6 STTH15R06D/FP Fig. 6: Reverse recovery charges versus dIF/dt (90% confidence). Fig. 7: Softness factor versus dIF/dt (typical values). S factor Qrr(nC) 800 0.35 IF=IF(av) VR=400V Tj=125°C VR=400V Tj=125°C 700 IF=2 x IF(av) 0.30 600 500 0.25 IF=IF(av) 400 IF=0.5 x IF(av) 0.20 300 200 0.15 100 dIF/dt(A/µs) dIF/dt(A/µs) 0 0.10 0 200 400 600 800 1000 0 200 400 600 800 1000 Fig. 8: Relative variation of dynamic parameters versus junction temperature. Fig. 9: Transient peak forward voltage versus dIF/dt (90% confidence). 2.50 12 VFP(V) IF=IF(av) VR=400V Tj=125°C 2.25 S factor IF=IF(av) Tj=125°C 11 10 2.00 9 1.75 8 1.50 7 1.25 6 1.00 5 0.75 4 IRM 3 0.50 0.25 2 Tj(°C) Qrr Reference: Tj=125°C 25 50 dIF/dt(A/µs) 1 0.00 75 100 125 0 0 Fig. 10: Forward recovery time versus dIF/dt (90% confidence). 100 200 300 400 500 Fig. 11: Junction capacitance versus reverse voltage applied (typical values). tfr(ns) C(pF) 1000 260 IF=IF(av) VFR=1.1 x VF max. Tj=125°C 240 220 F=1MHz Vosc=30mV Tj=25°C 200 180 160 140 100 120 100 80 60 40 20 VR(V) dIF/dt(A/µs) 0 10 0 4/6 100 200 300 400 500 1 10 100 1000 STTH15R06D/FP PACKAGE MECHANICAL DATA TO-220FPAC DIMENSIONS REF. Millimeters Inches A B D E F F1 G G1 H L2 L3 L4 L5 L6 L7 Dia. Min. Max. 4.4 4.6 2.5 2.7 2.5 2.75 0.45 0.70 0.75 1 1.15 1.70 4.95 5.20 2.4 2.7 10 10.4 16 Typ. 28.6 30.6 9.8 10.6 2.9 3.6 15.9 16.4 9.00 9.30 3.00 3.20 Min. Max. 0.173 0.181 0.098 0.106 0.098 0.108 0.018 0.027 0.030 0.039 0.045 0.067 0.195 0.205 0.094 0.106 0.393 0.409 0.63 Typ. 1.126 1.205 0.386 0.417 0.114 0.142 0.626 0.646 0.354 0.366 0.118 0.126 REF. Millimeters A H B Dia L6 L2 L7 L3 L5 D F1 L4 F E G1 G PACKAGE MECHANICAL DATA TO-220AC DIMENSIONS A H2 C L5 L7 ØI L6 L2 D L9 F1 M F E G Min. Max. Min. Max. A 4.40 4.60 0.173 0.181 C 1.23 1.32 0.048 0.051 D 2.40 2.72 0.094 0.107 E 0.49 0.70 0.019 0.027 F 0.61 0.88 0.024 0.034 F1 1.14 1.70 0.044 0.066 G 4.95 5.15 0.194 0.202 H2 10.00 10.40 0.393 0.409 L2 L4 Inches 16.40 typ. 0.645 typ. L4 13.00 14.00 0.511 0.551 L5 2.65 2.95 0.104 0.116 L6 15.25 15.75 0.600 0.620 L7 6.20 6.60 0.244 0.259 L9 3.50 3.93 0.137 0.154 M Diam. I 2.6 typ. 3.75 3.85 0.102 typ. 0.147 0.151 5/6 STTH15R06D/FP ■ ■ ■ ■ Ordering code Marking Package Weight Base qty Delivery mode STTH15R06D STTH15R06D TO-220AC 1.9 g 50 Tube STTH15R06FP STTH15R06FP TO-220FPAC 1.7 g 50 Tube Cooling method: by conduction (C) Recommended torque value (TO-220AC): 0.55 Nm Maximum torque value (TO-220AC / TO-220FPAC): 0.7 Nm Epoxy meets UL 94,V0 Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics © 2002 STMicroelectronics - Printed in Italy - All rights reserved. STMicroelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - Finland - France - Germany Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Singapore Spain - Sweden - Switzerland - United Kingdom - United States. http://www.st.com 6/6