JMnic Product Specification 2N6383 2N6384 2N6385 Silicon NPN Power Transistors DESCRIPTION ・With TO-3 package ・Complement to type 2N6648/6649/6650 ・DARLINGTON ・High DC current gain APPLICATIONS ・Designed for low and medium frequency power application such as power switching audio amplifer ,hammer drivers and shunt and series regulators PINNING PIN DESCRIPTION 1 Base 2 Emitter 3 Collector Fig.1 simplified outline (TO-3) and symbol Absolute maximum ratings(Ta=℃) SYMBOL PARAMETER CONDITIONS 2N6383 VCBO VCEO Collector-base voltage Collector-emitter voltage 2N6384 Open emitter 60 2N6385 80 2N6383 40 2N6384 Emitter-base voltage UNIT 40 Open base 2N6385 VEBO VALUE 60 V V 80 Open collector 5 V IC Collector current 10 A ICM Collector current-peak 15 A IB Base current 0.25 A PD Total Power Dissipation 100 W Tj Junction temperature 200 ℃ Tstg Storage temperature -65~200 ℃ VALUE UNIT 1.75 ℃/W TC=25℃ THERMAL CHARACTERISTICS SYMBOL Rth j-c PARAMETER Thermal resistance junction to case JMnic Product Specification 2N6383 2N6384 2N6385 Silicon NPN Power Transistors CHARACTERISTICS Tj=25℃ unless otherwise specified SYMBOL PARAMETER CONDITIONS 2N6383 VCEO(SUS) Collector-emitter sustaining voltage 2N6384 MIN TYP. MAX UNIT 40 IC=0.2A ;IB=0 2N6385 V 60 80 VCEsat-1 Collector-emitter saturation voltage IC=5A; IB=10mA 2.0 V VCEsat-2 Collector-emitter saturation voltage IC=10A ;IB=100mA 3.0 V VBE-1 Base-emitter on voltage IC=5A ; VCE=3V 2.8 V VBE-2 Base-emitter on voltage IC=10A ; VCE=3V 4.5 V 1.0 mA ICEO ICEX Collector cut-off current Collector cut-off current 2N6383 VCE=40V; IB=0 2N6384 VCE=60V; IB=0 2N6385 VCE=80V; IB=0 2N6383 VCE=40V; VBE=-1.5V TC=125℃ 0.3 3.0 2N6384 VCE=60V; VBE=-1.5V TC=125℃ 0.3 3.0 2N6385 VCE=80V; VBE=-1.5V TC=125℃ 0.3 3.0 10 IEBO Emitter cut-off current VEB=5V; IC=0 hFE-1 DC current gain IC=5A ; VCE=3V 1000 hFE-2 DC current gain IC=10A ; VCE=3V 100 COB Output capacitance IE=0; VCB=10V;f=1MHz 2 mA mA 20000 200 pF JMnic Product Specification 2N6383 2N6384 2N6385 Silicon NPN Power Transistors PACKAGE OUTLINE Fig.2 outline dimensions (unindicated tolerance:±0.10mm) 3