NSC 100301D

100301
Low Power Triple 5-Input OR/NOR Gate
General Description
The 100301 is a monolithic triple 5-input OR/NOR gate. All
inputs have 50 kΩ pull-down resistors and all outputs are
buffered.
n
n
n
n
2000V ESD protection
Pin/function compatible with 100101
Voltage compensated operating range = −4.2V to −5.7V
Standard Microcircuit Drawing
(SMD) 5962-9152801
Features
n 23% power reduction of the 100101
Logic Symbol
Pin Names
Description
Dna, Dnb, Dnc
Data Inputs
Oa, Ob, Oc
Data Outputs
Oa, Ob, Oc
Complementary Data Outputs
DS100302-1
© 1998 National Semiconductor Corporation
DS100302
www.national.com
100301 Low Power Triple 5-Input OR/NOR Gate
August 1998
Connection Diagrams
24-Pin DIP
24-Pin Quad Cerpak
DS100302-3
DS100302-2
www.national.com
2
Absolute Maximum Ratings (Note 1)
≥2000V
ESD (Note 2)
If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales Office/
Distributors for availability and specifications.
Recommended Operating
Conditions
Above which the useful life may be impaired
−65˚C to +150˚C
Storage Temperature (TSTG)
Maximum Junction Temperature (TJ)
Ceramic
+175˚C
VEE Pin Potential to
Ground Pin
−7.0V to +0.5V
Input Voltage (DC)
VEE to +0.5V
Output Current (DC Output HIGH)
−50 mA
Case Temperature (TC)
Military
Supply Voltage (VEE)
−55˚C to +125˚C
−5.7V to −4.2V
Note 1: Absolute maximum ratings are those values beyond which the device may be damaged or have its useful life impaired. Functional operation
under these conditions is not implied.
Note 2: ESD testing conforms to MIL-STD-883, Method 3015.
Military Version
DC Electrical Characteristics
VEE = −4.2V to −5.7V, VCC = VCCA = GND, TC = −55˚C to +125˚C
Symbol
Parameter
Conditions
Min
Max
Units
TC
VOH
Output HIGH Voltage −1025
−870
mV
0˚C to +125˚C
−1085
VOL
Output LOW Voltage
VOHC
Output HIGH Voltage −1035
VOLC
Output LOW Voltage
VIH
Input HIGH Voltage
−870
mV
−55˚C
−1830 −1620
mV
0˚C to +125˚C
−1830 −1555
mV
−55˚C
mV
0˚C to +125˚C
−1085
−1165
mV
−55˚C
−1610
mV
0˚C to +125˚C
−1555
mV
−55˚C
−870
mV
−55˚C to +125˚C
VIN = VIH(Max)
Loading with
or VIL (Min)
50Ω to −2.0V
VIN = VIH(Min)
Loading with
or VIL (Max)
50Ω to −2.0V
Guaranteed HIGH Signal
for All Inputs
VIL
IIL
IIH
IEE
Input LOW Voltage
Input LOW Current
−1830 −1475
0.50
Input HIGH Current
Power Supply
mV
−32
µA
−55˚C to +125˚C
Guaranteed LOW Signal
−55˚C to +125˚C
for All Inputs
VEE = −4.2V
VIN = VIL(Min)
VEE = −5.7V
240
µA
0˚C to +125˚C
340
µA
−55˚C
−12
mA
−55˚C to +125˚C
Notes
(Notes 3, 4, 5)
(Notes 3, 4, 5)
(Notes 3, 4, 5,
6)
(Notes 3, 4, 5,
6)
(Notes 3, 4, 5)
(Notes 3, 4, 5)
VIN = VIH (Max)
Inputs Open
(Notes 3, 4, 5)
Current
Note 3: F100K 300 Series cold temperature testing is performed by temperature soaking (to guarantee junction temperature equals −55˚C), then testing immediately
without allowing for the junction temperature to stabilize due to heat dissipation after power-up. This provides “cold start” specs which can be considered a worst case
condition at cold temperatures.
Note 4: Screen tested 100% on each device at −55˚C, +25˚C, and +125˚C, Subgroups 1, 2, 3, 7, and 8.
Note 5: Sample tested (Method 5005, Table I) on each manufactured lot at −55˚C, +25˚C, and +125˚C, Subgroups A1, 2, 3, 7, and 8.
Note 6: Guaranteed by applying specified input condition and testing VOH/VOL.
AC Electrical Characteristics
VEE = −4.2V to −5.7V, VCC = VCCA = GND
Symbol
Parameter
tPLH
Propagation Delay
tPHL
Data to Output
tTLH
Transition Time
tTHL
20% to 80%, 80% to 20%
TC = −55˚C
TC = +25˚C
TC = +125˚C
Min
Max
Min
Max
Min
Max
0.25
1.70
0.30
1.50
0.30
1.80
0.30
1.20
0.30
1.20
0.30
1.20
Units
Conditions
Notes
Figures 1, 2
(Notes 7, 8, 9,
11)
ns
ns
(Note 10)
Note 7: F100K 300 Series cold temperature testing is performed by temperature soaking (to guarantee junction temperature equals −55˚C), then testing immediately
after power-up. This provides “cold start” specs which can be considered a worst case condition at cold temperatures.
Note 8: Screen tested 100% on each device at +25˚C temperature only, Subgroup A9.
Note 9: Sample tested (Method 5005, Table I) on each manufactured lot at +25˚C, Subgroup A9, and at +125˚C and −55˚C temperatures, Subgroups A10 and A11.
3
www.national.com
AC Electrical Characteristics
(Continued)
Note 10: Not tested at +25˚C, +125˚C, and −55˚C temperature (design characterization data).
Note 11: The propagation delay specified is for single output switching. Delays may vary up to 100 ps with multiple outputs switching.
Test Circuitry
DS100302-5
Notes:
VCC, VCCA = +2V, VEE = −2.5V
L1 and L2 = equal length 50Ω impedance lines
RT = 50Ω terminator internal to scope
Decoupling 0.1 µF from GND to VCC and VEE
All unused outputs are loaded with 50Ω to GND
CL = Fixture and stray capacitance ≤ 3 pF
FIGURE 1. AC Test Circuit
Switching Waveforms
DS100302-6
FIGURE 2. Propagation Delay and Transition Times
www.national.com
4
Physical Dimensions
inches (millimeters) unless otherwise noted
24-Lead Ceramic Dual-In-Line Package (0.400" Wide) (D)
NS Package Number J24E
24-Lead Quad Cerpak (F)
NS Package Number W24B
5
www.national.com
100301 Low Power Triple 5-Input OR/NOR Gate
LIFE SUPPORT POLICY
NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein:
2. A critical component in any component of a life support
1. Life support devices or systems are devices or sysdevice or system whose failure to perform can be reatems which, (a) are intended for surgical implant into
sonably expected to cause the failure of the life support
the body, or (b) support or sustain life, and whose faildevice or system, or to affect its safety or effectiveness.
ure to perform when properly used in accordance
with instructions for use provided in the labeling, can
be reasonably expected to result in a significant injury
to the user.
National Semiconductor
Corporation
Americas
Tel: 1-800-272-9959
Fax: 1-800-737-7018
Email: [email protected]
www.national.com
National Semiconductor
Europe
Fax: +49 (0) 1 80-530 85 86
Email: [email protected]
Deutsch Tel: +49 (0) 1 80-530 85 85
English Tel: +49 (0) 1 80-532 78 32
Français Tel: +49 (0) 1 80-532 93 58
Italiano Tel: +49 (0) 1 80-534 16 80
National Semiconductor
Asia Pacific Customer
Response Group
Tel: 65-2544466
Fax: 65-2504466
Email: [email protected]
National Semiconductor
Japan Ltd.
Tel: 81-3-5620-6175
Fax: 81-3-5620-6179
National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.