Filename: tfs 1732a.doc Version 2.1 Vectron International 12.03.2012 Filter specification TFS 1732A 1/5 Measurement condition Ambient temperature: Input power level: Terminating impedance: Input: Output: 23 0 °C dBm 50 50 Ω Ω Characteristics Remark: The reference level for the relative attenuation arel of the TFS1732A is the maximum attenuation in the pass band. The maximum attenuation in the pass band is defined as the insertion loss ae. The nominal frequency fN is fixed at 1732.5MHz without any tolerance or limit. The values of relative attenuation arel are guaranteed for the whole operating temperature range. The frequency shift of the filter in the operating temperature range is included in the production tolerance scheme. Data typ. value Insertion loss ae Nominal frequency fN 2 dB PB Passband Pass band variation tolerance / limit max. fN 3.0 ± dB 1732.5 MHz 22.5 MHz 1 dB max. 2 dB arel Relative attenuation 1650 1670 MHz MHz ... … 1670 MHz 1690 MHz 30 15 dB dB min. min. 25 5 dB dB 1775 1795 MHz MHz … ... 1795 MHz 1815 MHz 16 32 dB dB min. min. 5 25 dB dB 11 min. 9 dB - max. 10 - - 40 °C ... + 85 °C - - 40 °C ... + 85 °C Return loss within PB Input power level Operating temperature range OTR Storage temperature range Temperature coefficient of frequency TCf * -40 ppm/K dBm - *) ∆f(Hz) = TCf(ppm/K) x (T-T0) x fTo(MHz) Generated: Checked / Approved: Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 1732a.doc Version 2.1 Vectron International 12.03.2012 Filter specification TFS 1732A 2/5 0 0 -5 -1 -10 -2 -15 -3 5 4.5 4 -20 -25 -30 3.5 -4 -5 3 -6 VSWR magnitude in dB magnitude in dB Filter characteristic 2.5 -7 -35 2 -8 -40 1.5 -9 -45 1600 1650 1700 1750 1800 frequency in MHz 1850 -10 1900 1700 1720 1740 frequency in MHz 1760 1 Construction and pin connection (All dimensions in mm) 5 6 4 1,2 Max. K32A ● C11 1 2 Ground Input Ground Ground Output Ground Date code: C D E ... Year + week 2012 2013 2014 3 Date code 3 0,75 0,30X0,30 1 3,0 +/-0,15 1 2 3 4 5 6 6 0,6 4 0,6 50 Ω Test circuit L1 2 5 L2 SAW 1, 3, 4, 6 Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 1732a.doc Version 2.1 Vectron International 12.03.2012 Filter specification TFS 1732A 3/5 Stability characteristics, reliability After the following tests the filter shall meet the whole specification: 1. Shock: 500g, 1 ms, half sine wave, 3 shocks each plane; DIN IEC 68 T2 - 27 2. Vibration: 10 Hz to 500 Hz, 0,35 mm or 5 g respectively, 1 octave per min, 10 cycles per plan, 3 planes; DIN IEC 68 T2 - 6 3. Change of temperature: 4. Resistance to solder heat (reflow): -55 °C to 125°C / 30 min. each / 10 cycles DIN IEC 68 part 2 – 14 Test N reflow possible: three times max.; for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4; This filter is RoHS compliant (2002/95/EG, 2005/618/EG) Packing Tape & Reel: IEC 286 – 3, with exception of value for N and minimum bending radius; tape type II, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: reel of empty components at start: reel of empty components at start including leader: trailer: 3000 min. 300 mm min. 500 mm min. 300 mm Pull Off Direction Tape (all dimensions in mm) W : 8,00 ± 0,3 Po : 4,00 ± 0,1 Do : 1,50 +0,1/-0 E : 1,75 ± 0,1 F : 3,50 ± 0,05 G(min) : 0,75 P2 : 2,00 ± 0,05 P1 : 4,00 ± 0,1 D1(min) : 1,50 Ao : 3,25 ± 0,1 Bo : 3,25 ± 0,1 Ct : 5,3 ± 0,1 P1 t Po P2 W G Ct Bo F G E Do PIN Marker Ko Date Code Typ D1 Ao W 2 Reel (all dimensions in mm) A : 180 W1 : 8,4 +1,5/-0 W2(max) : 14,4 N(min) : 60 C : 13,0 ± 0,2 C A N W 1 The minimum bending radius is 45 mm. Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 1732a.doc Version 2.1 Vectron International 12.03.2012 Filter specification TFS 1732A 4/5 Air reflow temperature conditions Conditions Average ramp-up rate (30°C to 217°C) > 100°C > 150°C > 217°C Peak temperature Time within 5°C of actual peak temperature Cool-down rate (Peak to 50°C) Time from 30°C to Peak temperature Exposure less than 3°C/second between 300 and 600 seconds between 240 and 500 seconds between 30 and 150 seconds max. 260°C between 10 and 30 seconds less than 6°C/second no greater than 300 seconds Chip-mount air reflow profile Temperature / °C max. 260°C 217° C max. 300 s 10 ... 30 s Time / s 30 ... 150 s Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 1732a.doc Vectron International Version 2.1 Filter specification 12.03.2012 TFS 1732A 5/5 History Version Reason of Changes Name Date 1.0 - Generation of development specification S.Springfeldt 04.01.2012 1.1 - Typo correction in absolute attenuation S. Springfeldt 04.01.2012 2.0 - Change reference level towards relative attenuation - Fixing power input level S.Springfeldt 16.01.2012 - Generation of filter specification S.Springfeldt 12.03.2012 2.1 Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.