ROHM RFU10TF6S

Super Fast Recovery Diode
RFU10TF6S
Series
Ultra Fast Recovery
Dimentions(Unit : mm)
Structure
Applications
General rectification
(1)
(3)
Features
1)Single type.(TO-220)
2)Ultra High switching speed
Construction
Silicon epitaxial plnner
(1)
Absolute maximum ratings(Tc=25C)
Parameter
Symbol
VRM
Repetitive peak reverse voltage
VR
Reverse voltage
Average rectified forward current
Io
Forward current surge peak
IFSM
Junction temperature
Storage temperature
Tj
Tstg
Electrical characteristics(Tj=25C)
Parameter
Symbol
VF
Forward voltage
IR
Reverse current
Reverse recovery time
trr
Thermal Resistance
Rth(j-c)
www.rohm.com
©2010 ROHM Co., Ltd. All rights reserved.
(3)
Conditions
Duty≦0.5
Direct voltage
Tc=50C
60Hz half sin wave, Non-repetitive
one cycle peak value, Tj=25C
60Hz half sin wave, Resistance load,
Conditions
IF=10A
VR=600V
IF=0.5A,IR=1A,Irr=0.25×I R
junction to case
1/3
Min.
-
Limits
600
600
10
Unit
V
V
A
100
A
150
-55 to +150
C
C
Typ.
2.3
0.03
16
-
Max.
2.8
10
25
3.5
Unit
V
μA
ns
C / W
2010.01 - Rev.A
RFU10TF6S
Data Sheet
Electrical characteristics curves
100
100000
1000
10000
REVERSE CURRENT : IR(nA)
Tj=150C
10
Tj=25C
Tj=75C
1
Tj=75 C
1000
100
Tj=25 C
10
0
1000
2000
3000
4000
10
0
5000
FORWARD VOLTAGE : V F(mV)
VF-IF CHARACTERISTICS
100
200
300
400
500
600
0
2300
2200
AVE : 2249mV
2100
AVE : 47.3nA
10
VF DISPERSION MAP
100
1cyc
IFSM
8.3ms
RESERVE RECOVERY TIME : trr(ns)
AVE : 150.0A
230
220
AVE : 221.3pF
210
Ct DISPERSION MAP
1000
Tｊ=25C
IF=0.5A
IR=1A
Irr=0.25×IR
n=10pcs
25
20
15
AVE : 16.2ns
10
5
100
10
IFSM
8.3ms
1
1
10
NUMBER OF CYCLES
IFSM-CYCLE CHARACTERISTICS
trr DISPERSION MAP
IFSM DISRESION MAP
5
1000
8.3ms
1cyc.
0
0
30
200
30
150
25
Ta=25C
f=1MHz
VR=0V
n=10pcs
IR DISPERSION MAP
200
20
240
1
2000
15
250
Tｊ=25C
VR=600V
n=20pcs
CAPACITANCE BETWEEN TERMINALS :
Ct(pF)
2400
REVERSE CURRENT : IR(nA)
Tｊ=25C
IF=10A
n=20pcs
10
REVERSE VOLTAGE : VR(V)
VR-Ct CHARACTERISTICS
100
50
5
REVERSE VOLTAGE : VR(V)
VR-IR CHARACTERISTICS
2500
FORWARD VOLTAGE : VF(mV)
100
1
0.1
ITS ABILITY OF PEAK SURGE
FORWARD CURRENT: : IFSM(A)
f=1MHz
Tj=25C
PEAK SURGE
FORWARD CURRENT : IFSM(A)
FORWARD CURRENT : IF(A)
Tj=125C
Tj=125 C
CAPACITANCE BETWEEN TERMINALS :
Ct(pF)
Tj=150 C
100
10
IFSM
time
100
4
3.5
AVE：4.11kV
3
2.5
2
1.5
1
0.5
AVE：1.14kV
TRANSIENT
THAERMAL IMPEDANCE : Rth (℃/W)
ELECTROSTATIC
DISCHARGE TEST ESD(KV)
PEAK SURGE
FORWARD CURRENT : IFSM(A)
4.5
Rth(j-c)
1
0
10
1
10
TIME:t(ms)
IFSM-t CHARACTERISTICS
www.rohm.com
©2010 ROHM Co., Ltd. All rights reserved.
100
C=100pF
R=1.5k
C=200pF
R=0
ESD DISPERSION MAP
2/3
0.1
0.001
0.01
0.1
1
10
100
1000
TIME : t(s)
Rth-t CHARACTERISTICS
2010.01 - Rev.A
RFU10TF6S
45
16
D=0
40
AVERAGE RECTIFIED
FORWARD CURRENT : Io(A)
D=0
12
D=0.
25
D=0.0
20
15
10
VR
t
D=0.5
10
D=0.
Io
0V
D=0.8
half sin
30
0A
D.C.
14
D.C.
35
FORWARD POWER
DISSIPATION : Pf(W)
Data Sheet
T
D=t/T
VR=480V
Tj=150C
half sin
8
D=0.2
6
D=0.1
4
D=0 0
2
5
0
0
0
3
6
9
12
15
AVERAGE RECTIFIED
FORWARD CURRENT : Io(A)
Io-Pf CHARACTERISTICS
www.rohm.com
©2010 ROHM Co., Ltd. All rights reserved.
18
0
30
60
90
120
CASE TEMPARATURE : Tc(C)
Derating Curve"(Io-Tc)
3/3
150
2010.01 - Rev.A
Notice
Notes
No copying or reproduction of this document, in part or in whole, is permitted without the
consent of ROHM Co.,Ltd.
The content specified herein is subject to change for improvement without notice.
The content specified herein is for the purpose of introducing ROHM's products (hereinafter
"Products"). If you wish to use any such Product, please be sure to refer to the specifications,
which can be obtained from ROHM upon request.
Examples of application circuits, circuit constants and any other information contained herein
illustrate the standard usage and operations of the Products. The peripheral conditions must
be taken into account when designing circuits for mass production.
Great care was taken in ensuring the accuracy of the information specified in this document.
However, should you incur any damage arising from any inaccuracy or misprint of such
information, ROHM shall bear no responsibility for such damage.
The technical information specified herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or
implicitly, any license to use or exercise intellectual property or other rights held by ROHM and
other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the
use of such technical information.
The Products specified in this document are intended to be used with general-use electronic
equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices).
The Products specified in this document are not designed to be radiation tolerant.
While ROHM always makes efforts to enhance the quality and reliability of its Products, a
Product may fail or malfunction for a variety of reasons.
Please be sure to implement in your equipment using the Products safety measures to guard
against the possibility of physical injury, fire or any other damage caused in the event of the
failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM
shall bear no responsibility whatsoever for your use of any Product outside of the prescribed
scope or not in accordance with the instruction manual.
The Products are not designed or manufactured to be used with any equipment, device or
system which requires an extremely high level of reliability the failure or malfunction of which
may result in a direct threat to human life or create a risk of human injury (such as a medical
instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuelcontroller or other safety device). ROHM shall bear no responsibility in any way for use of any
of the Products for the above special purposes. If a Product is intended to be used for any
such special purpose, please contact a ROHM sales representative before purchasing.
If you intend to export or ship overseas any Product or technology specified herein that may
be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to
obtain a license or permit under the Law.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
ROHM Customer Support System
http://www.rohm.com/contact/
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
R1010A