ROHM RFU20TM5S

Super Fast Recovery Diode
RFU20TM5S
Dimensions(Unit : mm)
Series
Ultra Fast Recovery
Structure
Applications
General rectification
(1) (2) (3)
Features
1)Cathode common Single type.(TO-220)
2)Ultra high switching speed
(1)
(2)
(3)
Construction
Silicon epitaxial planer
Absolute maximum ratings (Tc=25C)
Parameter
Symbol
Repetitive peak reverse voltage
Reverse voltage
Average rectified forward current
VRM
VR
Io
Forward current surge peak
IFSM
Junction temperature
Storage temperature
Tj
Tstg
Electrical characteristics(Tj=25C)
Parameter
Symbol
Thermal Resistance
Limits
Unit
Duty0.5
Direct voltage
530
530
20
V
V
A
100
A
150
-55to+150
C
C
Tc=95C
60Hz half sin wave, Non-repetitive
one cycle peak value, Tj=25C
60Hz half sin wave, Resistance load,
Conditions
Min.
Typ.
Max.
VF
IR
IF=20A
VR=530V
-
1.65
0.05
2
trr
Rth(j-c)
IF=0.5A,IR=1A,Irr=0.25×IR
-
23
-
Forward voltage
Reverse current
Reverse recovery time
Conditions
www.rohm.com
©2009 ROHM Co., Ltd. All rights reserved.
junction to case
1/3
10
30
1.8
Unit
V
μA
ns
C/W
2010.01 - Rev.A
RFU20TM5S
Data Sheet
Electrical characteristic curves
100
100000
1000
10
Tj=125C
Tj=25C
1
10000
Tj=125C
1000
f=1MHz
Tj=25C
CAPACITANCE BETWEEN
TERMINALS : Ct(pF)
Tj=150C
REVERSE CURRENT : IR(nA)
FORWARD CURRENT : IF(A)
Tj=150C
100
100
10
Tj=25C
0.1
500
1000
1500
2000
2500
3000
0
FORWARD VOLTAGE : V F(mV)
VF-IF CHARACTERISTICS
200
300
400
500
600
0
1600
1500
AVE : 1567mV
Tｊ=25C
VR=530V
n=20pcs
AVE : 64.0nA
10
VF DISPERSION MAP
410
250
8.3ms
AVE : 231.0A
150
AVE : 419pF
350
Ct DISPERSION MAP
1000
Tｊ=25C
IF=0.5A
IR=1A
Irr=0.25*IR
n=10pcs
35
30
25
20
AVE : 22.7ns
15
100
IFSM
8.3ms
10
1
ELECTROSTATIC
DISCHARGE TEST ESD(KV)
PEAK SURGE
FORWARD CURRENT : IFSM(A)
t
100
4
3
2
AVE : 0.9kV
AVE : 2.32kV
1
0
10
10
TIME : t(ms)
IFSM-t CHARACTERISTICS
www.rohm.com
©2009 ROHM Co., Ltd. All rights reserved.
100
100
100
5
C=100pF
R=1.5k
C=200pF
R=0
ESD DISPERSION MAP
2/3
TRANSIENT
THAERMAL IMPEDANCE : Rth (C/W)
1000
1
10
NUMBER OF CYCLES
IFSM-CYCLE CHARACTERISTICS
trr DISPERSION MAP
IFSM DISRESION MAP
IFSM
8.3ms
1cyc
10
100
30
370
PEAK SURGE
FORWARD CURRENT : IFSM(A)
RESERVE RECOVERY TIME : trr(ns)
1cyc
25
390
40
IFSM
20
Tｊ=25C
f=1MHz
VR=0V
n=10pcs
IR DISPERSION MAP
300
15
430
1
1400
200
10
450
CAPACITANCE BETWEEN
TERMINALS : Ct(pF)
Tｊ=25C
IF=20A
n=20pcs
1700
5
REVERSE VOLTAGE : VR(V)
VR-Ct CHARACTERISTICS
100
REVERSE CURRENT : IR(nA)
FORWARD VOLTAGE : VF(mV)
100
REVERSE VOLTAGE : VR(V)
VR-IR CHARACTERISTICS
1800
PEAK SURGE
FORWARD CURRENT : IFSM(A)
10
1
0
IF=1A
IM=100mA
10
1ms
time
Rth(j-a)
300us
Rth(j-c)
1
0.1
0.001
0.01
0.1
1
10
TIME : t(s)
Rth-t CHARACTERISTICS
100
1000
2010.01 - Rev.A
RFU20TM5S
Data Sheet
Io
0A
0V
VR
t
D=t/T
35
35
0A
D=0.8
FORWARD POWER
DISSIPATION : Pf(W)
D=0.5
D.C.
D=0.1
D=0.05
20
D.C.
30
0V
15
10
5
0
D=0.8
25
T
D=t/T
VR=430V
Tj=150C
D=0.5
20
half sin wave
15
D=0.2
10
D=0.1
D=0.05
5
30
VR
t
D=0.2
AVERAGE RECTIFIED
FORWARD CURRENT : Io(A)
half sin wave
25
5
10
15
20
25
30
AVERAGE RECTIFIED
FORWARD CURRENT : Io(A)
Io-Pf CHARACTERISTICS
www.rohm.com
©2009 ROHM Co., Ltd. All rights reserved.
35
VR=430V
Tj=150C
D.C.
D=0.8
25
D=0.5
20
half sin wave
15
D=0.2
10
D=0.1
D=0.05
5
0
0
T
Io
AVERAGE RECTIFIED
FORWARD CURRENT : Io(A)
30
0
0
30
60
90
120
AMBIENT TEMPERATURE : Ta(C)
Derating Curve"(Io-Ta)
3/3
150
0
30
60
90
120
CASE TEMPARATURE : Tc(C)
Derating Curve"(Io-Tc)
150
2010.01 - Rev.A
Notice
Notes
No copying or reproduction of this document, in part or in whole, is permitted without the
consent of ROHM Co.,Ltd.
The content specified herein is subject to change for improvement without notice.
The content specified herein is for the purpose of introducing ROHM's products (hereinafter
"Products"). If you wish to use any such Product, please be sure to refer to the specifications,
which can be obtained from ROHM upon request.
Examples of application circuits, circuit constants and any other information contained herein
illustrate the standard usage and operations of the Products. The peripheral conditions must
be taken into account when designing circuits for mass production.
Great care was taken in ensuring the accuracy of the information specified in this document.
However, should you incur any damage arising from any inaccuracy or misprint of such
information, ROHM shall bear no responsibility for such damage.
The technical information specified herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or
implicitly, any license to use or exercise intellectual property or other rights held by ROHM and
other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the
use of such technical information.
The Products specified in this document are intended to be used with general-use electronic
equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices).
The Products specified in this document are not designed to be radiation tolerant.
While ROHM always makes efforts to enhance the quality and reliability of its Products, a
Product may fail or malfunction for a variety of reasons.
Please be sure to implement in your equipment using the Products safety measures to guard
against the possibility of physical injury, fire or any other damage caused in the event of the
failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM
shall bear no responsibility whatsoever for your use of any Product outside of the prescribed
scope or not in accordance with the instruction manual.
The Products are not designed or manufactured to be used with any equipment, device or
system which requires an extremely high level of reliability the failure or malfunction of which
may result in a direct threat to human life or create a risk of human injury (such as a medical
instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuelcontroller or other safety device). ROHM shall bear no responsibility in any way for use of any
of the Products for the above special purposes. If a Product is intended to be used for any
such special purpose, please contact a ROHM sales representative before purchasing.
If you intend to export or ship overseas any Product or technology specified herein that may
be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to
obtain a license or permit under the Law.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
ROHM Customer Support System
http://www.rohm.com/contact/
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
R1010A