APTGL60DH120T3G Asymmetrical - Bridge Trench + Field Stop IGBT4 Power module 13 Application Welding converters Switched Mode Power Supplies Uninterruptible Power Supplies 14 Q1 CR1 VCES = 1200V IC = 60A @ Tc = 80°C CR3 18 22 7 23 8 Features Trench + Field Stop IGBT 4 Technology - Low voltage drop - Low leakage current - Low switching losses - Soft recovery parallel diodes - Low diode VF - Low leakage current - RBSOA and SCSOA rated - Symmetrical design Kelvin emitter for easy drive Very low stray inductance High level of integration Internal thermistor for temperature monitoring 19 Q4 CR2 CR4 4 3 30 29 31 15 32 16 R1 28 27 26 25 23 22 20 19 18 29 16 30 15 31 14 13 32 2 3 4 7 8 10 11 12 All multiple inputs and outputs must be shorted together Example: 13/14 ; 29/30 ; 22/23 … Benefits Outstanding performance at high frequency operation Direct mounting to heatsink (isolated package) Low junction to case thermal resistance Solderable terminals both for power and signal for easy PCB mounting Low profile Easy paralleling due to positive TC of VCEsat Each leg can be easily paralleled to achieve a phase leg of twice the current capability RoHS compliant Symbol VCES Parameter Collector - Emitter Breakdown Voltage IC Continuous Collector Current ICM VGE PD Pulsed Collector Current Gate – Emitter Voltage Maximum Power Dissipation RBSOA TC = 25°C Max ratings 1200 80 60 100 ±20 280 Tj = 150°C 100A @ 1100V TC = 25°C TC = 80°C TC = 25°C Reverse Bias Safe Operating Area Unit V A V W These Devices are sensitive to Electrostatic Discharge. Proper Handling Procedures Should Be Followed. See application note APT0502 on www.microsemi.com www.microsemi.com 1-6 APTGL60DH120T3G – Rev 1 October, 2012 Absolute maximum ratings APTGL60DH120T3G All ratings @ Tj = 25°C unless otherwise specified Electrical Characteristics Symbol Characteristic ICES Zero Gate Voltage Collector Current VCE(sat) Collector Emitter saturation Voltage VGE(th) IGES Gate Threshold Voltage Gate – Emitter Leakage Current Test Conditions VGE = 0V, VCE = 1200V Tj = 25°C VGE = 15V IC = 50A Tj = 150°C VGE = VCE , IC = 1.6mA VGE = 20V, VCE = 0V Min Typ 5.0 1.85 2.25 5.8 Min Typ Max Unit 250 2.25 µA 6.5 400 V nA Max Unit V Dynamic Characteristics Symbol Characteristic Cies Coes Cres Input Capacitance Output Capacitance Reverse Transfer Capacitance QG Gate charge Td(on) Tr Td(off) Tf Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time Td(on) Turn-on Delay Time Tr Rise Time Turn-off Delay Time Fall Time Td(off) Tf Eon Turn-on Switching Energy Eoff Turn-off Switching Energy Isc Short Circuit data Test Conditions VGE = 0V VCE = 25V f = 1MHz VGE= ±15V ; VCE=600V IC=50A Inductive Switching (25°C) VGE = ±15V VCE = 600V IC = 50A RG = 8.2 Inductive Switching (150°C) VGE = ±15V VCE = 600V IC = 50A RG = 8.2 TJ = 25°C VGE = ±15V VCE = 600V TJ = 150°C IC = 50A TJ = 25°C RG = 8.2 TJ = 150°C VGE ≤15V ; VBus = 900V tp ≤10µs ; Tj = 150°C 2770 205 160 pF 0.38 µC 130 20 300 ns 45 150 35 350 80 3.8 5.5 2.5 4.5 ns mJ mJ 200 A Reverse diode ratings and characteristics Characteristic Test Conditions Min 1200 Maximum Peak Repetitive Reverse Voltage Maximum Reverse Leakage Current DC Forward Current VF Diode Forward Voltage trr Reverse Recovery Time Qrr Reverse Recovery Charge Er Reverse Recovery Energy VR=1200V IF = 50A VGE = 0V IF = 50A VR = 600V di/dt =1300A/µs Typ Tj = 25°C Tc = 80°C Tj = 25°C Tj = 150°C 90 1.5 1.43 Tj = 25°C 155 Tj = 150°C Tj = 25°C 300 4.8 Tj = 150°C Tj = 25°C Tj = 150°C 10 1.7 3.6 www.microsemi.com Max 250 2.0 Unit V µA A V ns µC mJ 2-6 APTGL60DH120T3G – Rev 1 October, 2012 Symbol VRRM IRM IF APTGL60DH120T3G Thermal and package characteristics Symbol Characteristic RthJC VISOL TJ TSTG TC Torque Wt Min Junction to Case Thermal Resistance RMS Isolation Voltage, any terminal to case t =1 min, 50/60Hz Operating junction temperature range Storage Temperature Range Operating Case Temperature Mounting torque Package Weight Typ IGBT Diode To heatsink M4 4000 -40 -40 -40 2 Max 0.53 0.62 Unit °C/W V 175 125 100 3 110 °C N.m g Temperature sensor NTC (see application note APT0406 on www.microsemi.com for more information). Symbol R25 ∆R25/R25 B25/85 ∆B/B Characteristic Resistance @ 25°C Min T25 = 298.15 K TC=100°C RT R25 Typ 50 5 3952 4 Max Unit k % K % T: Thermistor temperature 1 1 RT: Thermistor value at T exp B25 / 85 T T 25 See application note 1901 - Mounting Instructions for SP3 Power Modules on www.microsemi.com www.microsemi.com 3-6 APTGL60DH120T3G – Rev 1 October, 2012 SP3 Package outline (dimensions in mm) APTGL60DH120T3G Typical Performance Curve Output Characteristics (VGE=15V) 100 Output Characteristics 100 TJ = 150°C 80 TJ=25°C 60 VGE=19V 60 TJ=150°C IC (A) IC (A) 80 40 20 VGE=15V 40 VGE=9V 20 0 0 0 1 2 VCE (V) 3 4 0 Transfert Characteristics 100 12 E (mJ) IC (A) 60 40 TJ=150°C 3 4 VCE = 600V VGE = 15V RG = 8.2 Ω TJ = 150°C TJ=25°C 16 2 VCE (V) Energy losses vs Collector Current 20 80 20 1 Eoff 8 4 Er Eon 0 0 5 6 7 8 9 10 11 12 0 13 20 Switching Energy Losses vs Gate Resistance 60 80 100 Reverse Bias Safe Operating Area 12 120 Eon 10 100 VCE = 600V VGE =15V IC = 50A TJ = 150°C 8 6 80 IC (A) E (mJ) 40 IC (A) VGE (V) Eoff 60 40 4 VGE=15V TJ=150°C RG=8.2 Ω 20 Er 0 2 0 10 20 30 Gate Resistance (ohms) 0 40 300 600 900 VCE (V) 1200 1500 maximum Effective Transient Thermal Impedance, Junction to Case vs Pulse Duration 0.5 0.9 0.4 0.7 0.3 0.5 0.2 0.3 0.1 0.1 IGBT Single Pulse 0.05 0 0.00001 0.0001 0.001 0.01 0.1 1 10 rectangular Pulse Duration (Seconds) www.microsemi.com 4-6 APTGL60DH120T3G – Rev 1 October, 2012 Thermal Impedance (°C/W) 0.6 APTGL60DH120T3G Forward Characteristic of diode 120 VCE=600V D=50% RG=8.2 Ω TJ=150°C Tc=75°C ZCS 100 75 50 IF, Forward Current (A) Fmax, Operating Frequency (kHz) Operating Frequency vs Collector Current 125 ZVS 25 Hard switching 100 80 60 TJ=150°C 40 TJ=25°C 20 0 0 10 20 30 40 50 60 IC (A) 70 80 90 0 0.5 1 1.5 2 VF, Anode to Cathode Voltage (V) 0.7 0.6 0.9 0.5 0.7 0.4 DIODE 0.5 0.3 0.2 0.1 0.3 0.1 0.05 0 0.00001 Single Pulse 0.0001 0.001 0.01 0.1 Rectangular Pulse Duration in Seconds www.microsemi.com 1 10 5-6 APTGL60DH120T3G – Rev 1 October, 2012 Thermal Impedance (°C/W) maximum Effective Transient Thermal Impedance, Junction to Case vs Pulse Duration APTGL60DH120T3G DISCLAIMER The information contained in the document (unless it is publicly available on the Web without access restrictions) is PROPRIETARY AND CONFIDENTIAL information of Microsemi and cannot be copied, published, uploaded, posted, transmitted, distributed or disclosed or used without the express duly signed written consent of Microsemi. If the recipient of this document has entered into a disclosure agreement with Microsemi, then the terms of such Agreement will also apply. This document and the information contained herein may not be modified, by any person other than authorized personnel of Microsemi. No license under any patent, copyright, trade secret or other intellectual property right is granted to or conferred upon you by disclosure or delivery of the information, either expressly, by implication, inducement, estoppels or otherwise. Any license under such intellectual property rights must be approved by Microsemi in writing signed by an officer of Microsemi. Microsemi reserves the right to change the configuration, functionality and performance of its products at anytime without any notice. This product has been subject to limited testing and should not be used in conjunction with lifesupport or other mission-critical equipment or applications. Microsemi assumes no liability whatsoever, and Microsemi disclaims any express or implied warranty, relating to sale and/or use of Microsemi products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. Any performance specifications believed to be reliable but are not verified and customer or user must conduct and complete all performance and other testing of this product as well as any user or customers final application. User or customer shall not rely on any data and performance specifications or parameters provided by Microsemi. It is the customer’s and user’s responsibility to independently determine suitability of any Microsemi product and to test and verify the same. The information contained herein is provided “AS IS, WHERE IS” and with all faults, and the entire risk associated with such information is entirely with the User. Microsemi specifically disclaims any liability of any kind including for consequential, incidental and punitive damages as well as lost profit. The product is subject to other terms and conditions which can be located on the web at http://www.microsemi.com/legal/tnc.asp Life Support Application Seller's Products are not designed, intended, or authorized for use as components in systems intended for space, aviation, surgical implant into the body, in other applications intended to support or sustain life, or for any other application in which the failure of the Seller's Product could create a situation where personal injury, death or property damage or loss may occur (collectively "Life Support Applications"). Buyer agrees not to use Products in any Life Support Applications and to the extent it does it shall conduct extensive testing of the Product in such applications and further agrees to indemnify and hold Seller, and its officers, employees, subsidiaries, affiliates, agents, sales representatives and distributors harmless against all claims, costs, damages and expenses, and attorneys' fees and costs arising, directly or directly, out of any claims of personal injury, death, damage or otherwise associated with the use of the goods in Life Support Applications, even if such claim includes allegations that Seller was negligent regarding the design or manufacture of the goods. www.microsemi.com 6-6 APTGL60DH120T3G – Rev 1 October, 2012 Buyer must notify Seller in writing before using Seller’s Products in Life Support Applications. Seller will study with Buyer alternative solutions to meet Buyer application specification based on Sellers sales conditions applicable for the new proposed specific part.