APTGL475U120DAG Single switch with Series diode Trench + Field Stop IGBT4 EK E C G CK VCES = 1200V IC = 475A @ Tc = 100°C Application Zero Current Switching resonant mode Features Trench + Field Stop IGBT 4 Technology - Low voltage drop - Low leakage current - Low switching losses Kelvin source for easy drive Very low stray inductance - Symmetrical design - M5 power connectors High level of integration AlN substrate for improved thermal performance Benefits Outstanding performance at high frequency operation Direct mounting to heatsink (isolated package) Low junction to case thermal resistance Low profile RoHS Compliant Absolute maximum ratings IC ICM VGE PD RBSOA Parameter Collector - Emitter Breakdown Voltage Continuous Collector Current Pulsed Collector Current Gate – Emitter Voltage Maximum Power Dissipation Reverse Bias Safe Operating Area Tc = 25°C Tc = 100°C Tc = 25°C Tc = 25°C Tj = 150°C Max ratings 1200 610 475 800 ±20 2307 800A @ 1150V Unit V A V W These Devices are sensitive to Electrostatic Discharge. Proper Handling Procedures Should Be Followed. See application note APT0502 on www.microsemi.com www.microsemi.com 1–6 APTGL475U120DAG – Rev 2 October, 2012 Symbol VCES APTGL475U120DAG All ratings @ Tj = 25°C unless otherwise specified Electrical Characteristics Symbol Characteristic ICES Zero Gate Voltage Collector Current VCE(sat) Collector Emitter Saturation Voltage VGE(th) Gate Threshold Voltage Test Conditions VGE = 0V ; VCE = 1200V VGE =15V Tj = 25°C IC = 400A Tj = 150°C VGE = VCE, IC = 10 mA Min Typ 5 1.8 2.2 5.8 Test Conditions Min Typ Max 4 2.2 Unit mA 6.5 V Max Unit V Dynamic Characteristics Symbol Characteristic Cies Coes Cres Input Capacitance Output Capacitance Reverse Transfer Capacitance VGE = 0V VCE = 25V f = 1MHz 24.6 1.62 1.38 nF QG Gate charge VGE=±15V 3.4 µC Turn-on Delay Time Rise Time Turn-off Delay Time Inductive Switching (25°C) VGE = ±15V VCE = 600V IC = 400A RG = 1.8 Inductive Switching (150°C) VGE = ±15V VCE = 600V IC = 400A RG = 1.8 TJ = 25°C VGE = ±15V VCE = 600V TJ = 150°C IC = 400A TJ = 25°C RG = 1.8 TJ = 150°C VGE≤15V ; VCC=900V tp≤10µs ; Tj=150°C 160 30 340 Td(on) Tr Td(off) Tf Td(on) Tr Td(off) Tf Fall Time Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time Eon Turn-on Switching Energy Eoff Turn-off Switching Energy ISC Short circuit current ns 80 170 40 ns 450 170 20.8 42 22 37.2 mJ 2000 A mJ Series diode ratings and characteristics IRM IF VF Maximum Reverse Leakage Current Test Conditions VR=1200V DC Forward Current Diode Forward Voltage trr Reverse Recovery Time Qrr Reverse Recovery Charge Min 1200 Tj = 25°C Tj = 125°C IF = 360A VR = 800V di/dt = 1200A/µs www.microsemi.com Max 400 2000 Tj = 125°C 360 2.5 3 1.8 Tj = 25°C 265 Tj = 125°C 350 Tj = 25°C 3.3 Tj = 125°C 17.3 Tj = 90°C IF = 360A IF = 720A IF = 360A Typ Unit V µA A 3 V ns µC 2–6 APTGL475U120DAG – Rev 2 October, 2012 Symbol Characteristic VRRM Maximum Repetitive Reverse Voltage APTGL475U120DAG Thermal and package characteristics Symbol Characteristic Min IGBT Series diode RthJC Junction to Case Thermal Resistance VISOL TJ TSTG TC RMS Isolation Voltage, any terminal to case t =1 min, 50/60Hz Operating junction temperature range Storage Temperature Range Operating Case Temperature Torque Mounting torque Wt Package Weight To Heatsink For teminals M6 M5 4000 -40 -40 -40 3 2 Typ Max 0.065 0.13 Unit °C/W V 175 125 100 5 3.5 300 °C N.m g SP6 Package outline (dimensions in mm) See application note APT0601 - Mounting Instructions for SP6 Power Modules on www.microsemi.com Operating Frequency vs Collector Current 80 70 60 ZCS 50 VCE=600V D=50% R G=1.8 Ω T J=150°C Tc=75°C 40 ZVS Hard switching 30 20 10 0 0 120 240 360 480 600 IC (A) www.microsemi.com 3–6 APTGL475U120DAG – Rev 2 October, 2012 Fmax, Operating Frequency (kHz) Typical IGBT Performance Curve APTGL475U120DAG Output Characteristics (VGE=15V) 800 Output Characteristics 800 TJ = 150°C VGE=19V 600 TJ=25°C VGE=15V TJ=150°C IC (A) IC (A) 600 400 400 VGE=9V 200 200 0 0 0 1 2 3 4 0 1 VCE (V) Transfert Characteristics 800 120 E (mJ) IC (A) VCE = 600V VGE = 15V RG = 1.8 Ω TJ = 150°C 140 600 400 3 100 Eon 80 60 Eoff 40 TJ=150°C 200 4 Energy losses vs Collector Current 160 TJ=25°C 2 VCE (V) 20 0 0 5 6 7 8 9 10 11 12 0 13 200 Switching Energy Losses vs Gate Resistance 600 800 Reverse Bias Safe Operating Area 80 960 VCE = 600V VGE =15V IC = 400A TJ = 150°C 70 Eon 800 640 IC (A) 60 E (mJ) 400 IC (A) VGE (V) 50 Eoff 40 480 320 30 VGE=15V TJ=150°C RG=1.8 Ω 160 20 0 0 2.5 5 7.5 Gate Resistance (ohms) 10 0 300 600 900 VCE (V) 1200 1500 maximum Effective Transient Thermal Impedance, Junction to Case vs Pulse Duration 0.06 0.9 0.05 0.7 0.04 IGBT 0.5 0.03 0.02 0.01 0.3 0.1 0.05 0 0.00001 Single Pulse 0.0001 0.001 0.01 0.1 1 10 rectangular Pulse Duration (Seconds) www.microsemi.com 4–6 APTGL475U120DAG – Rev 2 October, 2012 Thermal Impedance (°C/W) 0.07 APTGL475U120DAG Typical Series diode Performance Curve Maximum Effective Transient Thermal Impedance, Junction to Case vs Pulse Duration Thermal Impedance (°C/W) 0.15 0.9 0.12 0.7 0.09 0.5 0.06 0.3 0.03 0.1 Single Pulse 0.05 0 0.00001 0.0001 0.001 0.01 0.1 1 10 Rectangular Pulse Duration (Seconds) Forward Current vs Forward Voltage Trr vs. Current Rate of Charge TJ=125°C 600 450 300 TJ=25°C 150 0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 400 TJ=125°C VR=800V 300 720 A 200 360 A 180 A 100 0 0 3.5 1200 2400 3600 4800 6000 7200 IRRM vs. Current Rate of Charge QRR vs. Current Rate Charge 42 TJ=125°C VR=800V 36 720 A 30 360 A 24 180 A 18 12 6 0 0 1200 2400 3600 4800 6000 7200 -diF/dt (A/µs) Capacitance vs. Reverse Voltage 2400 300 TJ=125°C VR=800V 240 720 A 360 A 180 A 180 120 60 0 0 1200 2400 3600 4800 6000 7200 -diF/dt (A/µs) Max. Average Forward Current vs. Case Temp. 600 Duty Cycle = 0.5 TJ=175°C 480 1800 IF(AV) (A) C, Capacitance (pF) -diF/dt (A/µs) IRRM, Reverse Recovery Current (A) QRR, Reverse Recovery Charge (µC) VF, Anode to Cathode Voltage (V) 1200 600 360 240 120 0 0 1 10 100 VR, Reverse Voltage (V) 1000 www.microsemi.com 25 50 75 100 125 150 175 Case Temperature (ºC) 5–6 APTGL475U120DAG – Rev 2 October, 2012 750 trr, Reverse Recovery Time (ns) IF, Forward Current (A) 900 APTGL475U120DAG DISCLAIMER The information contained in the document (unless it is publicly available on the Web without access restrictions) is PROPRIETARY AND CONFIDENTIAL information of Microsemi and cannot be copied, published, uploaded, posted, transmitted, distributed or disclosed or used without the express duly signed written consent of Microsemi. If the recipient of this document has entered into a disclosure agreement with Microsemi, then the terms of such Agreement will also apply. This document and the information contained herein may not be modified, by any person other than authorized personnel of Microsemi. No license under any patent, copyright, trade secret or other intellectual property right is granted to or conferred upon you by disclosure or delivery of the information, either expressly, by implication, inducement, estoppels or otherwise. Any license under such intellectual property rights must be approved by Microsemi in writing signed by an officer of Microsemi. Microsemi reserves the right to change the configuration, functionality and performance of its products at anytime without any notice. This product has been subject to limited testing and should not be used in conjunction with lifesupport or other mission-critical equipment or applications. Microsemi assumes no liability whatsoever, and Microsemi disclaims any express or implied warranty, relating to sale and/or use of Microsemi products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. Any performance specifications believed to be reliable but are not verified and customer or user must conduct and complete all performance and other testing of this product as well as any user or customers final application. User or customer shall not rely on any data and performance specifications or parameters provided by Microsemi. It is the customer’s and user’s responsibility to independently determine suitability of any Microsemi product and to test and verify the same. The information contained herein is provided “AS IS, WHERE IS” and with all faults, and the entire risk associated with such information is entirely with the User. Microsemi specifically disclaims any liability of any kind including for consequential, incidental and punitive damages as well as lost profit. The product is subject to other terms and conditions which can be located on the web at http://www.microsemi.com/legal/tnc.asp Life Support Application Seller's Products are not designed, intended, or authorized for use as components in systems intended for space, aviation, surgical implant into the body, in other applications intended to support or sustain life, or for any other application in which the failure of the Seller's Product could create a situation where personal injury, death or property damage or loss may occur (collectively "Life Support Applications"). Buyer agrees not to use Products in any Life Support Applications and to the extent it does it shall conduct extensive testing of the Product in such applications and further agrees to indemnify and hold Seller, and its officers, employees, subsidiaries, affiliates, agents, sales representatives and distributors harmless against all claims, costs, damages and expenses, and attorneys' fees and costs arising, directly or directly, out of any claims of personal injury, death, damage or otherwise associated with the use of the goods in Life Support Applications, even if such claim includes allegations that Seller was negligent regarding the design or manufacture of the goods. www.microsemi.com 6–6 APTGL475U120DAG – Rev 2 October, 2012 Buyer must notify Seller in writing before using Seller’s Products in Life Support Applications. Seller will study with Buyer alternative solutions to meet Buyer application specification based on Sellers sales conditions applicable for the new proposed specific part.