MPF4392, MPF4393 JFET Switching Transistors N−Channel − Depletion Features • Pb−Free Packages are Available* http://onsemi.com 2 SOURCE MAXIMUM RATINGS Rating Symbol Value Unit Drain −Source Voltage VDS 30 Vdc Drain −Gate Voltag VDG 30 Vdc Gate−Source Voltage VGS 30 Vdc Forward Gate Current IG(f) 50 mAdc Total Device Dissipation @ TA = 25°C Derate above 25°C PD 350 2.8 mW mW/°C −65 to +150 °C Operating and Storage Channel Temperature Range Tchannel, Tstg Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 3 GATE 1 DRAIN 1 12 3 STRAIGHT LEAD BULK PACK TO−92 (TO−226AA) CASE 29−11 STYLE 5 2 3 BENT LEAD TAPE & REEL AMMO PACK MARKING DIAGRAM MPF 439x AYWW G G MPF439x = Device Code x = 2 or 3 A = Assembly Location Y = Year WW = Work Week G = Pb−Free Package (Note: Microdot may be in either location) ORDERING INFORMATION Device MPF4392 MPF4392G MPF4393 MPF4393G *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. © Semiconductor Components Industries, LLC, 2012 February, 2012 − Rev. 6 1 MPF4393RLRP MPF4393RLRPG Package Shipping† TO−92 1000 Units / Bulk TO−92 (Pb−Free) 1000 Units / Bulk TO−92 1000 Units / Bulk TO−92 (Pb−Free) 1000 Units / Bulk TO−92 1000 / Ammo Box TO−92 (Pb−Free) 1000 / Ammo Box Publication Order Number: MPF4392/D MPF4392, MPF4393 ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Characteristic Symbol Min Typ Max Unit 30 − − Vdc − − − − 1.0 0.2 nAdc mAdc − − − − 1.0 1.0 nAdc mAdc −2.0 −0.5 − − −5.0 −3.0 25 5.0 − − 75 30 − − − − 0.4 0.4 − − − − 60 100 − − 17 12 − − − − − − 60 100 − 6.0 10 − − 2.5 3.2 3.5 − − − 2.0 2.5 5.0 5.0 − − 15 29 20 35 − − 4.0 6.5 15 15 − − 20 37 35 55 OFF CHARACTERISTICS Gate −Source Breakdown Voltage (IG = −1.0 mAdc, VDS = 0) V(BR)GSS Gate Reverse Current (VGS = −15 Vdc, VDS = 0) (VGS = −15 Vdc, VDS = 0, TA = 100°C) IGSS Drain−Cutoff Current (VDS = 15 Vdc, VGS = −12 Vdc) (VDS = 15 Vdc, VGS = −12 Vdc, TA = 100°C) ID(off) Gate Source Voltage (VDS = 15 Vdc, ID = 10 nAdc) MPF4392 MPF4393 VGS Vdc ON CHARACTERISTICS Zero −Gate −Voltage Drain Current (Note 1) (VDS = 15 Vdc, VGS = 0) MPF4392 MPF4393 Drain−Source On−Voltage (ID = 6.0 mAdc, VGS = 0) (ID = 3.0 mAdc, VGS = 0) MPF4392 MPF4393 Static Drain−Source On Resistance (ID = 1.0 mAdc, VGS = 0) MPF4392 MPF4393 IDSS VDS(on) rDS(on) mAdc Vdc W SMALL−SIGNAL CHARACTERISTICS Forward Transfer Admittance (VDS = 15 Vdc, ID = 25 mAdc, f = 1.0 kHz) (VDS = 15 Vdc, ID = 5.0 mAdc, f = 1.0 kHz) MPF4392 MPF4393 Drain−Source “ON” Resistance (VGS = 0, ID = 0, f = 1.0 kHz) MPF4392 MPF4393 |yfs| rds(on) Input Capacitance (VGS = 15 Vdc, VDS = 0, f = 1.0 MHz) Ciss Reverse Transfer Capacitance (VGS = 12 Vdc, VDS = 0, f = 1.0 MHz) (VDS = 15 Vdc, ID = 10 mAdc, f = 1.0 MHz) Crss mmhos W pF pF SWITCHING CHARACTERISTICS Rise Time (See Figure 2) (ID(on) = 6.0 mAdc) (ID(on) = 3.0 mAdc) MPF4392 MPF4393 Fall Time (See Figure 4) (VGS(off) = 7.0 Vdc) (VGS(off) = 5.0 Vdc) MPF4392 MPF4393 Turn−On Time (See Figures 1 and 2) (ID(on) = 6.0 mAdc) (ID(on) = 3.0 mAdc) MPF4392 MPF4393 Turn−Off Time (See Figures 3 and 4) (VGS(off) = 7.0 Vdc) (VGS(off) = 5.0 Vdc) MPF4392 MPF4393 1. Pulse Test: Pulse Width v 300 ms, Duty Cycle v 3.0%. http://onsemi.com 2 tr tf ton toff ns ns ns ns MPF4392, MPF4393 TYPICAL SWITCHING CHARACTERISTICS 1000 TJ = 25°C 500 200 RK = RD′ MPF4392 MPF4393 500 VGS(off) = 7.0 V = 5.0 V 100 50 20 10 5.0 RK = 0 5.0 7.0 10 2.0 3.0 ID, DRAIN CURRENT (mA) 20 30 50 20 10 1.0 0.5 0.7 1.0 50 5.0 7.0 10 2.0 3.0 ID, DRAIN CURRENT (mA) 20 30 50 1000 MPF4392 MPF4393 200 500 VGS(off) = 7.0 V = 5.0 V TJ = 25°C RK = RD′ MPF4392 MPF4393 200 t f , FALL TIME (ns) t d(off) , TURN-OFF DELAY TIME (ns) RK = 0 Figure 2. Rise Time TJ = 25°C 500 100 RK = RD′ 20 10 RK = 0 VGS(off) = 7.0 V = 5.0 V 100 50 20 RK = 0 10 5.0 2.0 2.0 1.0 0.5 0.7 1.0 VGS(off) = 7.0 V = 5.0 V 2.0 1000 5.0 MPF4392 MPF4393 100 Figure 1. Turn−On Delay Time 50 TJ = 25°C 5.0 2.0 1.0 0.5 0.7 1.0 RK = RD′ 200 t r , RISE TIME (ns) t d(on), TURN-ON DELAY TIME (ns) 1000 2.0 3.0 5.0 7.0 10 ID, DRAIN CURRENT (mA) 20 30 1.0 0.5 0.7 1.0 50 Figure 3. Turn−Off Delay Time 5.0 7.0 10 2.0 3.0 ID, DRAIN CURRENT (mA) Figure 4. Fall Time http://onsemi.com 3 20 30 50 MPF4392, MPF4393 NOTE 1 The switching characteristics shown above were measured using a test circuit similar to Figure 5. At the beginning of the switching interval, the gate voltage is at Gate Supply Voltage (−VGG). The Drain−Source Voltage (VDS) is slightly lower than Drain Supply Voltage (VDD) due to the voltage divider. Thus Reverse Transfer Capacitance (Crss) or Gate−Drain Capacitance (Cgd) is charged to VGG + VDS. During the turn−on interval, Gate−Source Capacitance (Cgs) OUTPUT discharges through the series combination of RGen and RK. Cgd must discharge to VDS(on) through RG and RK in series with the parallel combination of effective load impedance (R′D) and Drain−Source Resistance (rds). During the turn−off, this charge flow is reversed. Predicting turn−on time is somewhat difficult as the channel resistance rds is a function of the gate−source voltage. While Cgs discharges, VGS approaches zero and rds decreases. Since Cgd discharges through rds, turn−on time is non−linear. During turn−off, the situation is reversed with rds increasing as Cgd charges. The above switching curves show two impedance conditions: 1) RK is equal to RD′ which simulates the switching behavior of cascaded stages where the driving source impedance is normally the load impedance of the previous stage, and 2) RK = 0 (low impedance) the driving source impedance is that of the generator. VDD RD SET VDS(off) = 10 V INPUT RK RT RGEN 50 W RGG 50 W VGEN 50 W VGG INPUT PULSE tr ≤ 0.25 ns tf ≤ 0.5 ns PULSE WIDTH = 2.0 ms DUTY CYCLE ≤ 2.0% RGG & RK RD′ = RD(RT + 50) RD + RT + 50 15 20 MPF4392 10 C, CAPACITANCE (pF) y fs , FORWARD TRANSFER ADMITTANCE (mmhos) Figure 5. Switching Time Test Circuit 10 MPF4393 7.0 5.0 Tchannel = 25°C VDS = 15 V 3.0 Cgs 7.0 5.0 Cgd Tchannel = 25°C (Cds IS NEGLIGIBLE) 3.0 2.0 1.5 2.0 0.5 0.7 1.0 5.0 7.0 10 2.0 3.0 ID, DRAIN CURRENT (mA) 20 30 1.0 0.03 0.05 50 0.1 30 2.0 200 IDSS = 10 160 mA 25 mA 50 mA 75 mA 100 mA 125 mA rds(on) , DRAIN-SOURCE ON-STATE RESISTANCE (NORMALIZED) rds(on) , DRAIN-SOURCE ON-STATE RESISTANCE (OHMS) 10 Figure 7. Typical Capacitance Figure 6. Typical Forward Transfer Admittance 120 80 40 Tchannel = 25°C 0 0.3 0.5 1.0 3.0 5.0 VR, REVERSE VOLTAGE (VOLTS) 0 1.0 2.0 3.0 5.0 4.0 6.0 VGS, GATE-SOURCE VOLTAGE (VOLTS) 7.0 8.0 1.8 ID = 1.0 mA VGS = 0 1.6 1.4 1.2 1.0 0.8 0.6 0.4 -70 -40 -10 20 50 80 110 Tchannel, CHANNEL TEMPERATURE (°C) 140 Figure 9. Effect of Temperature On Drain−Source On−State Resistance Figure 8. Effect of Gate−Source Voltage On Drain−Source Resistance http://onsemi.com 4 170 MPF4392, MPF4393 90 10 Tchannel = 25°C 80 70 8.0 7.0 rDS(on) @ VGS = 0 60 50 NOTE 2 9.0 6.0 VGS(off) 5.0 40 4.0 30 3.0 20 2.0 10 1.0 0 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 IDSS, ZERO-GATE VOLTAGE DRAIN CURRENT (mA) Figure 10. Effect of IDSS On Drain−Source Resistance and Gate−Source Voltage V GS , GATE-SOURCE VOLTAGE (VOLTS) r ds(on), DRAIN-SOURCE ON-STATE RESISTANCE (OHMS) 100 The Zero−Gate−Voltage Drain Current (IDSS), is the principle determinant of other J−FET characteristics. Figure 10 shows the relationship of Gate−Source Off Voltage (VGS(off)) and Drain−Source On Resistance (rds(on)) to IDSS. Most of the devices will be within ±10% of the values shown in Figure 10. This data will be useful in predicting the characteristic variations for a given part number. For example: Unknown rds(on) and VGS range for an MPF4392 The electrical characteristics table indicates that an MPF4392 has an IDSS range of 25 to 75 mA. Figure 10 shows rds(on) = 52 W for IDSS = 25 mA and 30 W for IDSS 75 mA. The corresponding VGS values are 2.2 V and 4.8 V. http://onsemi.com 5 MPF4392, MPF4393 PACKAGE DIMENSIONS TO−92 (TO−226) CASE 29−11 ISSUE AM A B STRAIGHT LEAD BULK PACK R P L SEATING PLANE K D X X G J H V C SECTION X−X N 1 N BENT LEAD TAPE & REEL AMMO PACK B P T SEATING PLANE G K D X X J V 1 DIM A B C D G H J K L N P R V INCHES MIN MAX 0.175 0.205 0.170 0.210 0.125 0.165 0.016 0.021 0.045 0.055 0.095 0.105 0.015 0.020 0.500 --0.250 --0.080 0.105 --0.100 0.115 --0.135 --- MILLIMETERS MIN MAX 4.45 5.20 4.32 5.33 3.18 4.19 0.407 0.533 1.15 1.39 2.42 2.66 0.39 0.50 12.70 --6.35 --2.04 2.66 --2.54 2.93 --3.43 --- STYLE 5: PIN 1. DRAIN 2. SOURCE 3. GATE A R NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM. C N SECTION X−X NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM. DIM A B C D G J K N P R V MILLIMETERS MIN MAX 4.45 5.20 4.32 5.33 3.18 4.19 0.40 0.54 2.40 2.80 0.39 0.50 12.70 --2.04 2.66 1.50 4.00 2.93 --3.43 --- ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5817−1050 http://onsemi.com 6 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative MPF4392/D