TFS1575T

Filename: tfs 1575t.doc
Version 2.0
Vectron International
15.06.2009
Filter specification
TFS 1575T
1/5
Measurement condition
Ambient temperature:
Input power level:
Terminating impedance: *
Input:
Output:
23
0
°C
dBm
50 Ω || 0 pF
50 Ω || 0 pF
Characteristics
Remark:
The minimum attenuation in the pass band is defined as the insertion loss ae. The nominal frequency fN is fixed at 1575,42 MHz without any tolerance or
limit. The values of absolute attenuation aabs are guaranteed for the whole operating temperature range. The frequency shift of the filter in the operating
temperature range is included in the production tolerance scheme.
Data
typ. value
Insertion loss
(reference level)
ae
1,3
Nominal frequency
fN
-
PB
-
Passband
Pass band ripple
Pass band variation
Absolute attenuation
0,3
1630,0
MHz
MHz
… 1520,0
… 2000,0
dB
tolerance / limit
max.
3,0
1575,42
fN
±
15,0
dB
MHz
MHz
0,5
dB
max.
2,0
dB
1,7
dB
max.
3,0
dB
43
45
dB
dB
min.
min.
40
40
dB
dB
aabs
MHz
MHz
Group delay ripple within PB
p-p
50
ns
max.
100
ns
Phase ripple within PB
p-p
50
°
max.
100
°
15
dB
min.
10
dB
max.
20 *
dBm
Return loss
Input power level
Operating temperature range
OTR
Storage temperature range
Temperature coefficient of frequency
TCf **
-
- 54 °C ... + 85 °C
-
- 54 °C ... + 85 °C
-46
ppm/K
-
*) This power level is only allowed for short term operation (cycle time 1:1000), the max. input power for continuous operation is max.10dBm only
**) ∆f(Hz) = TCf(ppm/K) x (T-T0) x fTo(MHz), fTo: frequency at room temperature
Generated:
Checked / Approved:
Vectron International GmbH & Co. KG
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: [email protected]
Vectron International GmbH & Co. KG reserves the right to make changes to the product(s) and/or information contained herein without
notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such
product(s) or information.
Filename: tfs 1575t.doc
Version 2.0
Vectron International
15.06.2009
Filter specification
TFS 1575T
2/5
0
0.155
-1
0.14
-12
-2
0.125
-18
-3
0.11
-24
-4
0.095
-5
0.08
-6
0.065
-42
-7
0.05
-48
-8
0.035
-54
-9
0.02
-30
-36
-60
225
495
765
1035
1305
1575
1845
frequency in MHz
2115
2385
2655
-10
1545
2925
1551
1557
1563
1569
1575
1581
frequency in MHz
1587
1593
1599
delay in µs
0
-6
magnitude in dB
magnitude in dB
Filter characteristic
0.005
1605
Construction and pin connection
(All dimensions in mm)
5
6
4
1,2 Max.
G75T
● X25
2
1
1
2
3
4
5
6
Ground
Input
Ground
Ground
Output
Ground
Date code:
X
A
B
...
Year + week
2008
2010
2011
3
Date code
3
0,75
3,0 +/-0,15
0,30X0,30
1
0,6
6
4
0,6
50 Ω Test circuit
L1
2
5
L2
SAW
1, 3, 4, 6
Vectron International GmbH & Co. KG
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: [email protected]
Vectron International GmbH & Co. KG reserves the right to make changes to the product(s) and/or information contained herein without
notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such
product(s) or information.
Filename: tfs 1575t.doc
Version 2.0
Vectron International
15.06.2009
Filter specification
TFS 1575T
3/5
Stability characteristics, reliability
After the following tests the filter shall meet the whole specification:
1. Shock:
500g, 1 ms, half sine wave, 3 shocks each plane;
DIN IEC 68 T2 - 27
2. Vibration:
10 Hz to 500 Hz, 0,35 mm or g respectively, 1 octave per min, 10 cycles per plan, 3 plans;
DIN IEC 68 T2 - 6
3. Change of
temperature:
4. Resistance to
solder heat (reflow):
5. ESD
-55 °C to 125°C / 30 min. each / 10 cycles
DIN IEC 68 part 2 – 14 Test N
reflow possible: three times max.;
for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4;
ANSI/ESD S20.20-1999, class 1A for HBM
This filter is RoHS compliant (2002/95/EG, 2005/618/EG)
Packing
Tape & Reel:
IEC 286 – 3, with exception of value for N and minimum bending radius;
tape type II, embossed carrier tape with top cover tape on the upper side;
max. pieces of filters per reel:
reel of empty components at start:
reel of empty components at start including leader:
trailer:
9000
min. 300 mm
min. 500 mm
min. 300 mm
Pull Off Direction
Tape (all dimensions in mm)
W
: 8,00 ± 0,3
Po
: 4,00 ± 0,1
Do
: 1,50 +0,1/-0
E
: 1,75 ± 0,1
F
: 3,50 ± 0,05
G(min)
: 0,75
P2
: 2,00 ± 0,05
P1
: 4,00 ± 0,1
D1(min)
: 1,50
Ao
: 3,25 ± 0,1
Bo
: 3,25 ± 0,1
Ct
: 5,5 ± 0,1
P1
Date Code
Do
P2
W
G
Ct
Bo
F
G
E
t
Po
Ko
Typ
PIN Marker
D1
Ao
W 2
Reel (all dimensions in mm)
A
: 330
W1
: 8,4 +1,5/-0
W2(max) : 14,4
N(min)
: 50
C
: 13,0 +0,5/-0,2
A
C
N
W 1
The minimum bending radius is 45 mm.
Vectron International GmbH & Co. KG
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: [email protected]
Vectron International GmbH & Co. KG reserves the right to make changes to the product(s) and/or information contained herein without
notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such
product(s) or information.
Filename: tfs 1575t.doc
Version 2.0
Vectron International
15.06.2009
Filter specification
TFS 1575T
4/5
Air reflow temperature conditions
Conditions
Average ramp-up rate (30°C to 217°C)
> 100°C
> 150°C
> 217°C
Peak temperature
Time within 5°C of actual peak temperature
Cool-down rate (Peak to 50°C)
Time from 30°C to Peak temperature
Exposure
less than 3°C/second
between 300 and 600 seconds
between 240 and 500 seconds
between 30 and 150 seconds
max. 260°C
between 10 and 30 seconds
less than 6°C/second
no greater than 300 seconds
Chip-mount air reflow profile
Temperature / °C
max. 260°C
217°C
max. 300 s
10 ... 30 s
Time / s
30 ... 150 s
Vectron International GmbH & Co. KG
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: [email protected]
Vectron International GmbH & Co. KG reserves the right to make changes to the product(s) and/or information contained herein without
notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such
product(s) or information.
Filename: tfs 1575t.doc
Vectron International
Version 2.0
Filter specification
15.06.2009
TFS 1575T
5/5
History
Version
Reason of changes
Name
Date
1.0
- Generation of development specification
Strehl
07.02.2008
1.1
- add of typical values and filter characteristics
Pfeiffer
10.10.2008
2.0
- fT0 defined
- group delay ripple and phase ripple added
Pfeiffer
15.06.2009
Vectron International GmbH & Co. KG
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: [email protected]
Vectron International GmbH & Co. KG reserves the right to make changes to the product(s) and/or information contained herein without
notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such
product(s) or information.