Order this document by MPS6714/D SEMICONDUCTOR TECHNICAL DATA NPN Silicon COLLECTOR 3 2 BASE 1 EMITTER MAXIMUM RATINGS Rating Symbol Collector – Emitter Voltage Value Unit VCEO MPS6714 MPS6715 Collector – Base Voltage Vdc 2 VCBO MPS6714 MPS6715 Emitter – Base Voltage 5.0 Collector Current — Continuous IC 1.0 Adc Total Device Dissipation @ TA = 25°C Derate above 25°C PD 1.0 8.0 Watts mW/°C Total Device Dissipation @ TC = 25°C Derate above 25°C PD 2.5 20 Watts mW/°C TJ, Tstg – 55 to +150 °C Symbol Max Unit Thermal Resistance, Junction to Ambient RqJA 125 °C/W Thermal Resistance, Junction to Case RqJC 50 °C/W 3 CASE 29–05, STYLE 1 TO–92 (TO–226AE) Vdc 40 50 VEBO Operating and Storage Junction Temperature Range 1 30 40 Vdc THERMAL CHARACTERISTICS Characteristic ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Symbol Characteristic Min Max 30 40 — — 40 50 — — 5.0 — — — 0.1 0.1 — 0.1 Unit OFF CHARACTERISTICS Collector – Emitter Breakdown Voltage(1) (IC = 10 mAdc, IB = 0) Collector – Base Breakdown Voltage (IC = 100 mAdc, IE = 0) V(BR)CEO MPS6714 MPS6715 V(BR)CBO MPS6714 MPS6715 Emitter – Base Breakdown Voltage (IE = 100 mAdc, IC = 0) Collector Cutoff Current (VCB = 40 Vdc, IE = 0) (VCB = 50 Vdc, IE = 0) V(BR)EBO Vdc IEBO Vdc µAdc ICBO MPS6714 MPS6715 Emitter Cutoff Current (VEB = 5.0 Vdc, IC = 0) 1. Pulse Test: Pulse Width Vdc µAdc v 30 ms; Duty Cycle v 2.0%. Motorola Small–Signal Transistors, FETs and Diodes Device Data Motorola, Inc. 1997 1 ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) (Continued) Characteristic Symbol Min Max 60 50 — 250 Unit ON CHARACTERISTICS(1) DC Current Gain (IC = 100 mAdc, VCE = 1.0 Vdc) (IC = 1000 mAdc, VCE = 1.0 Vdc) hFE — Collector – Emitter Saturation Voltage (IC = 1000 mAdc, IB = 100 mAdc) VCE(sat) — 0.5 Vdc Base – Emitter On Voltage (IC = 1000 mAdc, VCE = 1.0 Vdc) VBE(on) — 1.2 Vdc Collector–Base Capacitance (VCB = 10 Vdc, IE = 0, f = 1.0 MHz) Ccb — 30 pF Small–Signal Current Gain (IC = 50 mAdc, VCE = 10 Vdc, f = 20 MHz) hfe 2.5 25 — SMALL– SIGNAL CHARACTERISTICS 1. Pulse Test: Pulse Width v 30 ms; Duty Cycle v 2.0%. 1.0 VCE , COLLECTOR VOLTAGE (VOLTS) 300 h FE , CURRENT GAIN 200 100 70 VCE = 1.0 V TJ = 25°C 50 30 20 50 100 200 IC = 1000 mA 0.4 IC = 10 mA 0.2 IC = 50 mA IC = 100 mA IC = IC = 500 mA 250 mA 0.01 0.02 0.05 0.1 0.2 0.5 1.0 2.0 5.0 10 20 Figure 1. DC Current Gain Figure 2. Collector Saturation Region VBE(on) @ VCE = 1.0 V 0.4 VCE(sat) @ IC/IB = 10 0 1.0 2.0 1000 IB, BASE CURRENT (mA) VBE(sat) @ IC/IB = 10 0.2 2 0.6 IC, COLLECTOR CURRENT (mA) TJ = 25°C 0.6 500 5.0 10 20 50 100 200 500 1000 qVB , TEMPERATURE COEFFICIENT (mV/°C) V, VOLTAGE (VOLTS) 0.8 0.8 0 10 1.0 TJ = 25°C 50 100 –0.8 –1.2 –1.6 qVB FOR VBE –2.0 –2.4 –2.8 1.0 2.0 5.0 10 20 50 100 200 500 1000 IC, COLLECTOR CURRENT (mA) IC, COLLECTOR CURRENT (mA) Figure 3. “ON” Voltages Figure 4. Temperature Coefficient Motorola Small–Signal Transistors, FETs and Diodes Device Data 80 300 TJ = 25°C 200 C, CAPACITANCE (pF) f T, CURRENT–GAIN – BANDWIDTH PRODUCT (MHz) 100 70 VCE = 10 V TJ = 25°C f = 20 MHz 50 60 40 Cibo 20 30 Cobo 0 10 20 50 100 200 1000 Cobo Cibo IC, COLLECTOR CURRENT (mA) 5.0 1.0 10 2.0 15 3.0 20 4.0 25 5.0 VR, REVERSE VOLTAGE (VOLTS) Figure 5. Current Gain — Bandwidth Product Figure 6. Capacitance IC , COLLECTOR CURRENT (mA) 1k 1.0 s 500 1.0 ms 100 ms 200 TA = 25°C 100 DUTY CYCLE ≤ 10% CURRENT LIMIT THERMAL LIMIT SECOND BREAKDOWN LIMIT 50 20 10 1.0 TC = 25°C MPS6714 MPS6715 2.0 5.0 10 20 30 40 VCE, COLLECTOR–EMITTER VOLTAGE (V) Figure 7. Active Region — Safe Operating Area Motorola Small–Signal Transistors, FETs and Diodes Device Data 3 PACKAGE DIMENSIONS NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. DIMENSION F APPLIES BETWEEN P AND L. DIMENSIONS D AND J APPLY BETWEEN L AND K MIMIMUM. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM. A B R SEATING PLANE P L F DIM A B C D F G H J K L N P R V K X X D G H J V 1 2 3 N C SECTION X–X N CASE 029–05 (TO–226AE) ISSUE AD INCHES MIN MAX 0.175 0.205 0.290 0.310 0.125 0.165 0.018 0.022 0.016 0.019 0.045 0.055 0.095 0.105 0.018 0.024 0.500 ––– 0.250 ––– 0.080 0.105 ––– 0.100 0.135 ––– 0.135 ––– MILLIMETERS MIN MAX 4.44 5.21 7.37 7.87 3.18 4.19 0.46 0.56 0.41 0.48 1.15 1.39 2.42 2.66 0.46 0.61 12.70 ––– 6.35 ––– 2.04 2.66 ––– 2.54 3.43 ––– 3.43 ––– STYLE 1: PIN 1. EMITTER 2. BASE 3. COLLECTOR Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Mfax is a trademark of Motorola, Inc. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution; P.O. Box 5405, Denver, Colorado 80217. 303–675–2140 or 1–800–441–2447 JAPAN: Nippon Motorola Ltd.: SPD, Strategic Planning Office, 4–32–1, Nishi–Gotanda, Shinagawa–ku, Tokyo 141, Japan. 81–3–5487–8488 Mfax: [email protected] – TOUCHTONE 602–244–6609 ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, – US & Canada ONLY 1–800–774–1848 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298 INTERNET: http://motorola.com/sps 4 ◊ MPS6714/D Motorola Small–Signal Transistors, FETs and Diodes Device Data