LED - CHIP ELC-650-23 preliminary Color Type Technology Electrodes Red Mesa AlInGaP/GaAs N (anode) up Outline (typical dimensions in microns) 265 110 thickness 260 µm cathode gold alloy, 1.5 µm anode gold alloy, 0.5 µm, LED-12 Optical and Electrical Characteristics Tamb = 25°C, unless otherwise specified Forward voltage Test conditions IF = 20 mA Reverse voltage IR = 10 μA VR Radiant power IF = 20 mA Φe 1.1 mW Luminous intensity IF = 20 mA IV 30 mcd Radiant power* IF = 20 mA Φe 2 mW Luminous intensity* IF = 20 mA IV 60 mcd Peak wavelength IF = 20 mA λp 655 nm Spectral bandwidth at 50% IF = 20 mA Δλ0.5 18 nm Parameter Symbol Min VF Typ Max Unit 2.1 2.4 V 5 V *Measured on epoxy covered chip on TO-18 header Labeling Type Lot N° Φe (typ, min, max) Quantity ELC-650-23 Packing Chips on adhesive film with wire-bond side on top rev.11/05 EPIGAP Optoelektronik GmbH, D-12555 Berlin, Köpenicker Str. 325 b, Hs. 201, Tel.: +49-30-6576 2543, Fax.: +49-30-6576 2545