DATA SHEET MOS FIELD EFFECT TRANSISTOR µ PA2750GR SWITCHING N-CHANNEL POWER MOS FET DESCRIPTION PACKAGE DRAWING (Unit: mm) The µPA2750GR is N-Channel MOS Field Effect Transistor designed for DC/DC converters and power management application of notebook computers. 8 5 1 ; Source 1 2 ; Gate 1 7, 8 ; Drain 1 FEATURES 3 ; Source 2 4 ; Gate 2 5, 6 ; Drain 2 PACKAGE µPA2750GR Power SOP8 6.0 ±0.3 4 4.4 0.8 +0.10 –0.05 5.37 Max. 0.15 0.05 Min. ORDERING INFORMATION PART NUMBER 1.44 1 1.8 Max. • Dual chip type • Low on-state resistance RDS(on)1 = 15.5 mΩ MAX. (VGS = 10 V, ID = 4.5 A) RDS(on)2 = 21.0 mΩ MAX. (VGS = 4.5 V, ID = 4.5 A) RDS(on)3 = 23.9 mΩ MAX. (VGS = 4.0 V, ID = 4.5 A) • Low Ciss: Ciss = 1040 pF TYP. (VDS = 10 V, VGS = 0 V) • Built-in G-S protection diode • Small and surface mount package (Power SOP8) 1.27 0.40 0.5 ±0.2 0.10 0.78 Max. +0.10 –0.05 0.12 M ABSOLUTE MAXIMUM RATINGS (TA = 25°C, All terminals are connected.) Drain to Source Voltage (VGS = 0 V) VDSS 30 V Gate to Source Voltage (VDS = 0 V) VGSS ±20 V Drain Current (DC) ID(DC) ±9.0 A ID(pulse) ±36 A PT 1.7 W PT 2.0 W Drain Current (pulse) Note1 Total Power Dissipation (1 unit) Total Power Dissipation (2 unit) Note2 Note2 Channel Temperature Storage Temperature Single Avalanche Current Single Avalanche Energy Note3 Note3 Tch 150 °C Tstg –55 to +150 °C IAS 9.0 A EAS 8.1 mJ EQUIVALENT CIRCUIT (1/2 circuit) Drain Body Diode Gate Gate Protection Diode Source Notes 1. PW ≤ 10 µs, Duty cycle ≤ 1% 2 2. TA = 25°C, Mounted on ceramic substrate of 2000 mm x 2.2 mm 3. Starting Tch = 25°C, VDD = 15 V, RG = 25 Ω, VGS = 20 → 0 V Remark The diode connected between the gate and source of the transistor serves as a protector against ESD. When this device actually used, an additional protection circuit is externally required if a voltage exceeding the rated voltage may be applied to this device. The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all devices/types available in every country. Please check with local NEC representative for availability and additional information. Document No. G15780EJ1V0DS00 (1st edition) Date Published March 2002 NS CP(K) Printed in Japan © 2001 µPA2750GR ELECTRICAL CHARACTERISTICS (TA = 25°C, All terminals are connected.) CHARACTERISTICS SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNIT Zero Gate Voltage Drain Current IDSS VDS = 30 V, VGS = 0 V 10 µA Gate Leakage Current IGSS VGS = ±20 V, VDS = 0 V ±10 µA VGS(off) VDS = 10 V, ID = 1 mA 1.5 2.0 2.5 V | yfs | VDS = 10 V, ID = 4.5 A 5 11 RDS(on)1 VGS = 10 V, ID = 4.5 A 12.5 15.5 mΩ RDS(on)2 VGS = 4.5 V, ID = 4.5 A 16.0 21.0 mΩ RDS(on)3 VGS = 4.0 V, ID = 4.5 A 17.9 23.9 mΩ Gate Cut-off Voltage Forward Transfer Admittance Drain to Source On-state Resistance S Input Capacitance Ciss VDS = 10 V 1040 pF Output Capacitance Coss VGS = 0 V 390 pF Reverse Transfer Capacitance Crss f = 1 MHz 130 pF Turn-on Delay Time td(on) VDD = 15 V, ID = 4.5 A 13 ns tr VGS = 10 V 10 ns td(off) RG = 10 Ω 43 ns 9 ns Rise Time Turn-off Delay Time Fall Time tf Total Gate Charge QG VDD = 24 V 21 nC Gate to Source Charge QGS VGS = 10 V 3.3 nC Gate to Drain Charge QGD ID = 9.0 A 5.1 nC VF(S-D) IF = 9.0 A, VGS = 0 V 0.84 V Reverse Recovery Time trr IF = 9.0 A, VGS = 0 V 34 ns Reverse Recovery Charge Qrr di/dt = 100 A/ µs 34 nC Body Diode Forward Voltage TEST CIRCUIT 1 AVALANCHE CAPABILITY D.U.T. RG = 25 Ω PG. VGS = 20 → 0 V TEST CIRCUIT 2 SWITCHING TIME D.U.T. L 50 Ω VGS RL Wave Form RG PG. VDD VGS 0 VGS 10% 90% VDD VDS 90% BVDSS IAS VDS VDS ID Starting Tch τ τ = 1 µs Duty Cycle ≤ 1% TEST CIRCUIT 3 GATE CHARGE PG. 2 50 Ω 10% 0 10% Wave Form VDD D.U.T. IG = 2 mA 90% VDS VGS 0 RL VDD Data Sheet G15780EJ1V0DS td(on) tr ton td(off) tf toff µPA2750GR TYPICAL CHARACTERISTICS (TA = 25°C) DRAIN CURRENT vs. DRAIN TO SOURCE VOLTAGE FORWARD TRANSFER CHARACTERISTICS 100 40 4.5 V 35 10 1 ID - Drain Current - A ID - Drain Current - A Pulsed VDS = 10 V TA = −25˚C 25˚C 75˚C 150˚C 0.1 VGS = 10 V 30 4V 25 20 15 10 5 0.01 0 1 2 3 4 Pulsed 0 5 0 0.2 0.4 0.6 0.8 VDS - Drain to Source Voltage - V 100 VDS = 10 V Pulsed 10 TA = 150˚C 75˚C 25˚C −25˚C 1 0.1 0.01 0.1 1 10 100 RDS(on) - Drain to Source On-state Resistance - mΩ ID - Drain Current - A 1.0 DRAIN TO SOURCE ON-STATE RESISTANCE vs. GATE TO SOURCE VOLTAGE 50 Pulsed 40 ID = 9.0 A 30 4.5 A 20 10 0 0 5 10 15 20 VGS - Gate to Source Voltage - V DRAIN TO SOURCE ON-STATE RESISTANCE vs. DRAIN CURRENT GATE CUT-OFF VOLTAGE vs. CHANNEL TEMPERATURE 80 3.0 Pulsed 60 40 VGS = 4 V 20 4.5 V 10 V 0 0.1 1 10 VGS(off) - Gate Cut-off Voltage - V | yfs | - Forward Transfer Admittance - S FORWARD TRANSFER ADMITTANCE vs. DRAIN CURRENT RDS(on) - Drain to Source On-state Resistance - mΩ VGS - Gate to Source Voltage - V VDS = 10 V ID = 1 mA 2.5 2.0 1.5 1.0 0.5 100 ID - Drain Current - A 0 −75 −50 −25 0 25 50 75 100 125 150 175 Tch - Channel Temperature - ˚C Data Sheet G15780EJ1V0DS 3 SOURCE TO DRAIN DIODE FORWARD VOLTAGE DRAIN TO SOURCE ON-STATE RESISTANCE vs. CHANNEL TEMPERATURE 100 Pulsed ID = 4.5 A VGS = 10 V 30 VGS = 4 V 4.5 V 20 10 V 10 0 −50 −25 0 25 50 75 4V 1 0.1 Pulsed 0.01 100 125 150 175 0 0.5 Tch - Channel Temperature - ˚C SWITCHING CHARACTERISTICS td(on), tr, td(off), tf - Switching Time - ns Ciss, Coss, Crss - Capacitance - pF 1.5 1000 10000 Ciss 1000 Coss 100 Crss VGS = 0 V f = 1 MHz 10 0.1 1 10 tr 100 td(off) td(on) 10 tf 1 VDD = 15 V VGS = 10 V RG = 10 Ω 0.1 0.1 100 1 VDS - Drain to Source Voltage - V di/dt = 100 A/ µ s VGS = 0 V 100 10 1 0.1 1 10 100 DYNAMIC INPUT/OUTPUT CHARACTERISTICS VDS - Drain to Source Voltage - V 1000 10 ID - Drain Current - A REVERSE RECOVERY TIME vs. DRAIN CURRENT trr - Reverse Recovery Time - ns 1.0 VSD - Source to Drain Voltage - V CAPACITANCE vs. DRAIN TO SOURCE VOLTAGE 35 14 30 12 VDD = 24 V 15 V 6V 25 20 10 8 VGS 15 6 10 4 100 IF - Drain Current - A 4 0V 10 5 2 VDS ID = 9 A 0 0 2 4 6 8 10 12 14 16 18 20 22 QG - Gate Charge - nC Data Sheet G15780EJ1V0DS 0 VGS - Gate to Source Voltage - V 40 ISD - Diode Forward Current - A RDS(on) - Drain to Source On-state Resistance - mΩ µPA2750GR µPA2750GR DERATING FACTOR OF FORWARD BIAS SAFE OPERATING AREA TOTAL POWER DISSIPATION vs. AMBIENT TEMPERATURE PT - Total Power Dissipation - W/package dT - Percentage of Rated Power - % 120 100 80 60 40 20 0 0 20 40 60 80 2.8 Mounted on ceramic substrate of 2000 mm2 × 2.2 mm 2.4 2 unit 2.0 1 unit 1.6 1.2 0.8 0.4 0 0 100 120 140 160 20 TA - Ambient Temperature - ˚C 40 60 80 100 120 140 160 TA - Ambient Temperature - ˚C FORWARD BIAS SAFE OPERATING AREA 100 d ite Lim0 V) 1 (V 10 PW ID(pulse) =1 00 ID(DC) 1m µs s 10 Po we r 1 ms 10 Di 0m s ss ipa tio nL im ite d 0.1 Mounted on2ceramic substrate of 2000 mm x 2.2 mm Single Pulse, 1 unit TA = 25˚C Single Pulse 0.01 0.1 1 10 100 VDS - Drain to Source Voltage - V TRANSIENT THERMAL RESISTANCE vs. PULSE WIDTH 1000 Mounted on ceramic substrate 2 rth(t) - Transient Thermal Resistance - ˚C/W ID - Drain Current - A ) on S( RD GS = of 2000 mm x 2.2 mm Single Pulse, 1 unit TA = 25˚C Rth(ch-A) = 73.5˚C/W 100 10 1 0.1 0.0001 0.001 0.01 0.1 1 10 100 1000 PW - Pulse Width - s Data Sheet G15780EJ1V0DS 5 µPA2750GR SINGLE AVALANCHE ENERGY DERATING FACTOR SINGLE AVALANCHE CURRENT vs. INDUCTIVE LOAD 10 RG = 25 Ω VDD = 15 V VGS = 20 0V Starting Tch = 25˚C IAS = 9 A EAS = 8.1 mJ 1 10 µ 100 µ 1m 100 80 60 40 20 10 m 0 25 50 75 100 125 150 Starting Tch - Starting Channel Temperature - ˚C L - Inductive Load - H 6 RG = 25 W VDD = 15 V 0V VGS = 20 IAS 9 A 120 Energy Derating Factor - % IAS - Single Avalanche Current - A 100 Data Sheet G15780EJ1V0DS µPA2750GR [MEMO] Data Sheet G15780EJ1V0DS 7 µPA2750GR • The information in this document is current as of March, 2002. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC's data sheets or data books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products and/or types are available in every country. Please check with an NEC sales representative for availability and additional information. • No part of this document may be copied or reproduced in any form or by any means without prior written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document. • NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC semiconductor products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC or others. • Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of customer's equipment shall be done under the full responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. • While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC semiconductor products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment, and anti-failure features. • NEC semiconductor products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products developed based on a customer-designated "quality assurance program" for a specific application. The recommended applications of a semiconductor product depend on its quality grade, as indicated below. Customers must check the quality grade of each semiconductor product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness to support a given application. (Note) (1) "NEC" as used in this statement means NEC Corporation and also includes its majority-owned subsidiaries. (2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for NEC (as defined above). M8E 00. 4