Filename: tfs 1960.doc Version 2.2 Vectron International 11.12.2013 Filter specification TFS 1960 1/5 Measurement condition Ambient temperature: Input power level: Terminating impedance: Input: Output: 23 0 °C dBm 50 50 Ω Ω Characteristics Remark: The maximum attenuation in the pass band is defined as the insertion loss ae. The nominal frequency fN is fixed at 1960 MHz without any tolerance or limit. The values of absolute attenuation aabs are guaranteed for the whole operating temperature range. The frequency shift of the filter in the operating temperature range is included in the production tolerance scheme. Data typ. value Insertion loss Insertion loss in OTR2 ae 2,9 2,7 Nominal frequency fN - Passband dB dB PB tolerance / limit max. max. fN 4,3 4,1 ± dB dB 1960 MHz 30 MHz Pass band ripple 0,6 dB max. 2 dB Pass band variation 1,5 dB max. 3 dB dB dB dB dB dB dB dB dB dB dB min. min. min. min. min. min. min. min. min. min. 24 10,5 11,5 4,5 5,5 30 23 32 28 5 dB dB dB dB dB dB dB dB dB dB - max. 10 dBm Absolute attenuation 10 1850 1850 2010 2010 2040 2070 2500 2700 4000 MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz ... ... ... ... ... ... ... ... ... ... 1850 1910 1910 2040 2040 2070 2500 2700 4000 6000 aabs MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz 33 17 18 6 7 45 43 43 31 7 in OTR2 in OTR2 Input power level Operating temperature range OTR - - 30 °C ... + 85 °C Operating temperature range2 OTR2 - - 10 °C ... + 70 °C - - 40 °C ... + 85 °C Storage temperature range Temperature coefficient of frequency TCf * -46 ppm/K *) ∆f(Hz) = TCf(ppm/K) x (T-T0) x fTo(MHz) Generated: Checked / Approved: Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 1960.doc Version 2.2 Vectron International 11.12.2013 Filter specification TFS 1960 2/5 0 0 -10 -3 -20 -6 -30 -9 -40 -12 magnitude in dB magnitude in dB Filter characteristic -50 -60 -15 -18 -70 -21 -80 -24 -90 -27 -100 500 1000 1500 2000 2500 3000 3500 frequency in MHz 4000 4500 5000 5500 -30 1900 6000 1912 1924 1936 1948 1960 1972 frequency in MHz 1984 1996 2008 2020 Construction and pin connection (All dimensions in mm) 5 6 4 M60 ● D50 1,2 Max. Ground Input Ground Ground Output Ground Date code: C D E Year + week 2012 2013 2014 3 2 1 1 2 3 4 5 6 Date code 0,1 3 0,75 3 ±0,15 1,5 1 6 0,6 4 ... 0,6 50 Ohm Test circuit L1 2 5 L2 SAW 1, 3, 4, 6 Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 1960.doc Version 2.2 Vectron International 11.12.2013 Filter specification TFS 1960 3/5 Stability characteristics, reliability After the following tests the filter shall meet the whole specification: 1. Shock: 500g, 1 ms, half sine wave, 3 shocks each plane; DIN IEC 68 T2 - 27 2. Vibration: 10 Hz to 500 Hz, 0,35 mm or 5 g respectively, 1 octave per min, 10 cycles per plan, 3 plans; DIN IEC 68 T2 - 6 3. Change of temperature: 4. Resistance to solder heat (reflow): -55 °C to 125°C / 15 min. each / 100 cycles DIN IEC 68 part 2 – 14 Test N reflow possible: three times max.; for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4; This filter is RoHS compliant (20011/65/EU) Packing Tape & Reel: IEC 286 – 3, with exception of value for N and minimum bending radius; tape type II, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: reel of empty components at start: reel of empty components at start including leader: trailer: 3000 min. 300 mm min. 500 mm min. 300 mm Pull Off Direction Tape (all dimensions in mm) W : 8,00 ± 0,3 Po : 4,00 ± 0,1 Do : 1,50 +0,1/-0 E : 1,75 ± 0,1 F : 3,50 ± 0,05 G(min) : 0,75 P2 : 2,00 ± 0,05 P1 : 4,00 ± 0,1 D1(min) : 1,50 Ao : 3,25 ± 0,1 Bo : 3,25 ± 0,1 Ct : 5,3 ± 0,1 P1 t PIN Marker Po P2 W G Ct Bo F G E Do Ko Date Code Typ D1 Ao W 2 Reel (all dimensions in mm) A : 180 W1 : 8,4 +1,5/-0 W2(max) : 14,4 N(min) : 60 C : 13,0 ± 0,2 C A N W 1 The minimum bending radius is 45 mm. Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 1960.doc Version 2.2 Vectron International 11.12.2013 Filter specification TFS 1960 4/5 Air reflow temperature conditions Conditions Average ramp-up rate (30°C to 217°C) > 100°C > 150°C > 217°C Peak temperature Time within 5°C of actual peak temperature Cool-down rate (Peak to 50°C) Time from 30°C to Peak temperature Exposure less than 3°C/second between 300 and 600 seconds between 240 and 500 seconds between 30 and 150 seconds max. 260°C between 10 and 30 seconds less than 6°C/second no greater than 300 seconds Chip-mount air reflow profile Temperature / °C max. 260°C 217°C max. 300 s 10 ... 30 s Time / s 30 ... 150 s Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 1960.doc Vectron International Version 2.2 Filter specification 11.12.2013 TFS 1960 5/5 History Version Reason of Changes Name Date 1.0 Generation of development specification Roizengaft 19.12.2003 1.1 add of formula for temperature coefficient of frequency, add of value of temperature coefficient, change of operating temperature range, change of absolute attenuation Roizengaft 22.12.2003 1.2 add of typical values Dr. Sabah 08.01.2004 1.3 generation of filter specification added OTR 2 changed limit line scheme changed temperature coefficient added filter characteristic Martens 11.12.2006 1.4 changed limit line scheme Noack 25.10.2007 1.5 added filter characteristic Strehl 12.08.2008 2.0 change data table and filter characteristic Noack 12.04.2010 2.1 changing power level changing tape and reel direction S.Springfeldt 01.12.2011 changing power level S. Springfeldt 11.12.2013 2.2 Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.