Filename: tfs 178.doc Version 2.0 Vectron International 02.11.2012 Filter specification TFS 178 1/5 Measurement condition Ambient temperature: Input power level: source impedance (balanced): load impedance (balanced): Terminating impedance: * Input: Output: 23 0 200 Ω 200 Ω °C dBm 216 Ω || -6.9 pF 166 Ω || -9.1 pF Characteristics Remark: The reference level for the relative attenuation arel of the TFS178 is the minimum of the pass band attenuation. This value is defined as the insertion loss ae. The nominal frequency fN is fixed at 178 MHz without any tolerance. The values of relative attenuation arel are guaranteed for the whole operating temperature range. The frequency shift of the filter in the operating temperature range is included in the production tolerance scheme. Data typ. value Insertion loss (reference level) ae Nominal frequency fN 12,9 dB max. 15,5 178 PB Passband tolerance / limit fN 0,1 Pass band ripple dB max. MHz min. ± 10 2,0 dB MHz MHz dB Bandwidth 24 3 dB 20 MHz fN - 10 MHz … fN + 10 arel MHz 2 dB max. 3 dB fN - 50 MHz … fN - 35 MHz 48 dB min. 40 dB fN - 35 MHz … fN - 25 MHz 44 dB min. 30 dB fN - 25 MHz … fN - 18 MHz 25 dB min. 10 dB fN + 18 MHz … fN + 25 MHz 19 dB min. 10 dB fN + 25 MHz … fN + 35 MHz 34 dB min. 30 dB fN + 35 MHz … fN + 50 MHz 47 dB min. 40 dB Relative attenuation Group delay ripple in fN " 4 MHz *) GDR 6 ns max. "8 ns Group delay ripple in PB *) GDR 6 ns max. "9 ns max. "2,5 ns min. 6 dB max. 10 Group delay variation (unit to unit) *), **) 8 Return loss within PB Input power level Operating temperature range Storage temperature range OTR dB dBm - 40 °C ... + 85°C - 45 °C ... + 85°C TCf ****) -92 ppm/K *) time gating window 0 … 0.5µs **) Measured at centre frequency, and averaged value to account for unit to unit variation and different bandwidth variants ***) ∆fc(Hz) = Tcf(ppm/K) x (T - To) x fCAT (MHz). Temperature coefficient of frequency Generated: Checked / Approved: Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 178.doc Version 2.0 Vectron International 02.11.2012 Filter specification TFS 178 2/5 Filter characteristic 0 0 -1 0.29 -2 0.28 -3 0.27 -4 0.26 -5 0.25 -6 0.24 -7 0.23 -8 0.22 -9 0.21 magnitude in dB magnitude in dB -20 -30 -40 -50 delay in µs -10 -60 -70 120 140 160 180 frequency in MHz 200 220 -10 240 165 170 175 180 frequency in MHz 185 190 0.2 Construction and pin connection (All dimensions in mm) 7 5 S178 ● B43 3 5 1,1 0,1 1,1 120° +0,15 7 Date code: C D E ... Year + week 2012 2013 2014 1,8 Max. 1 Date code Ground Output 2 Output 1 Ground Ground Input 2 Input 1 Ground 0,64 3 5 - 0,10 1 1 2 3 4 5 6 7 8 2,54 50 Ω Test circuit L1 1:4 C1 6 SAW R1 L2 L3 3 7 C2 R2 2 1:4 L4 1,4,5,8 Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 178.doc Version 2.0 Vectron International 02.11.2012 Filter specification TFS 178 3/5 Stability characteristics, reliability After the following tests the filter shall meet the whole specification: 1. Shock: 500g, 1 ms, half sine wave, 3 shocks each plane; DIN IEC 68 T2 - 27 2. Vibration: 10 Hz to 500 Hz, 0,35 mm or 5 g respectively, 1 octave per min, 10 cycles per plane, 3 planes; DIN IEC 68 T2 - 6 3. Change of temperature: 4. Resistance to solder heat (reflow): 5. ESD -55 °C to 125°C / 30 min. each / 10 cycles DIN IEC 68 part 2 – 14 Test N reflow possible: three times max.; for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4; MIL-STD-883E using coupling network of ISO 10605 and EN 6100-4-2 HBM:250V; This filter is RoHS compliant (2002/95/EG, 2005/618/EG) Packing Tape & Reel: IEC 286 – 3, with exception of value for N and minimum bending radius; tape type II, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: reel of empty components at start: reel of empty components at start including leader: trailer: 3000 min. 300 mm min. 500 mm min. 300 mm Pull Off Direction Tape (all dimensions in mm) W : 12,00 Po : 4,00 Do : 1,50 E : 1,75 F : 5,50 G(min) : 0,75 P2 : 2,00 P1 : 8,00 D1(min) : 1,50 Ao : 5,30 Bo : 5,30 Ct : 9,2 ± 0,1 P1 t Po P2 W G Ct Bo F G E Do PIN Marker Ko Date Code Typ D1 Ao W 2 Reel (all dimensions in mm) A : 330 W1 : 12,4 +2/-0 W2(max) : 18,4 N(min) : 50 C : 13,0 C A N W 1 The minimum bending radius is 45 mm. Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 178.doc Version 2.0 Vectron International 02.11.2012 Filter specification TFS 178 4/5 Air reflow temperature conditions Conditions Average ramp-up rate (30°C to 217°C) > 100°C > 150°C > 217°C Peak temperature Time within 5°C of actual peak temperature Cool-down rate (Peak to 50°C) Time from 30°C to Peak temperature Exposure less than 3°C/second between 300 and 600 seconds between 240 and 500 seconds between 30 and 150 seconds max. 260°C between 10 and 30 seconds less than 6°C/second no greater than 300 seconds Chip-mount air reflow profile Temperature / °C max. 260°C 217°C max. 300 s 10 ... 30 s Time / s 30 ... 150 s Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: tfs 178.doc Vectron International Version 2.0 Filter specification 02.11.2012 TFS 178 5/5 History Version Reason of Changes 1.0 - dummy never released 1.1 - Generation of development specification Chilla 25.10.2011 1.2 - Changed packing - Changed triple transit delay Chilla 20.12.2011 1.3 - Created filter specification - Added terminating impedance - Added typical values - Changed input power level - Added filter characteristic - Added test circuit Chilla 26.03.2012 2.0 - Added time gating window - Removed triple transit level and triple transit delay Chilla 02.11.2012 Name Date Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.