EIC4450-18 4.40-5.00GHz 18-Watt Internally Matched Power FET UPDATED: 10/18/2007 2X 0.079 MIN 4X 0.102 FEATURES • • • • • • • • Excelics 0.945 0.803 0.580 YYWW SN 0.315 P1dB G1dB ∆G PAE 0.055 0.685 0.010 0.168 0.617 0.004 0.158 0.095 0.055 Caution! ESD sensitive device. ELECTRICAL CHARACTERISTICS (Ta = 25°C) PARAMETERS/TEST CONDITIONS1 SYMBOL 0.024 EIC4450-18 4.40– 5.00GHz Bandwidth Input/Output Impedance Matched to 50 Ohms +42.5 dBm Output Power at 1dB Compression 9.5 dB Power Gain at 1dB Compression 33% Power Added Efficiency -46 dBc IM3 at Po = 31.5 dBm SCL Hermetic Metal Flange Package 100% Tested for DC, RF, and RTH Output Power at 1dB Compression f = 4.40-5.00GHz VDS = 10 V, IDSQ ≈ 4500mA Gain at 1dB Compression f = 4.40-5.00GHz VDS = 10 V, IDSQ ≈ 4500mA Gain Flatness f = 4.40-5.00GHz VDS = 10 V, IDSQ ≈ 4500mA Power Added Efficiency at 1dB Compression f = 4.40-5.00GHz VDS = 10 V, IDSQ ≈ 4500mA MIN TYP MAX 41.5 42.5 dBm 8.5 9.5 dB ±0.8 dB 33 f = 4.40-5.00GHz % Id1dB Drain Current at 1dB Compression IM3 Output 3rd Order Intermodulation Distortion ∆f = 10 MHz 2-Tone Test; Pout = 31.5 dBm S.C.L2 VDS = 10 V, IDSQ ≈ 65% IDSS f = 5.00GHz IDSS Saturated Drain Current VDS = 3 V, VGS = 0 V 9000 13000 VP Pinch-off Voltage VDS = 3 V, IDS = 84 mA -2.5 -4.0 RTH UNITS 4800 -43 3 Thermal Resistance 5500 -46 mA dBc 1.6 1.8 mA V o C/W Note: 1. Tested with 50 Ohm gate resistor. 2. S.C.L. = Single Carrier Level. 3. Overall Rth depends on case mounting. ABSOLUTE MAXIMUM RATING SYMBOLS Vds Vgs Igf Igr Pin Tch Tstg Pt PARAMETERS Drain-Source Voltage Gate-Source Voltage Forward Gate Current Reverse Gate Current Input Power Channel Temperature Storage Temperature Total Power Dissipation ABSOLUTE CONTINUOUS 15V 10V -5V -4V 105mA 31.6mA -21.5mA -5.2mA 41.5dBm @ 3dB Compression 175C 175C -65C to +175C -65C to +175C 83W 83W Note: 1. Exceeding any of the above ratings may result in permanent damage. 2. Exceeding any of the above ratings may reduce MTTF below design goals. Specifications are subject to change without notice. Excelics Semiconductor, Inc. 310 De Guigne Drive, Sunnyvale, CA 94085 Phone: 408-737-1711 Fax: 408-737-1868 Web: www.excelics.com page 1 of 2 Revised October 2007 EIC4450-18 4.40-5.00GHz 18-Watt Internally Matched Power FET UPDATED: 10/18/2007 PERFORMANCE DATA Typical S-Parameters (T= 25°C, 50Ω system, de-embedded to edge of package) VDS = 10 V, IDSQ ≈ 4500mA S11 and S22 1.0 Swp Max 5.5GHz 0. 6 0.8 S(1,1) EIC4450_18 S21 and S12 20 2. 0 S(2,2) EIC4450_18 0. 3. 10 0 4 0 4. 5.0 0.2 0 DB(|S(2,1)|) EIC4450_18 -10 DB(|S(1,2)|) EIC4450_18 10.0 5.0 4.0 3.0 2.0 1.0 0.8 0.6 0.4 0 0.2 10.0 -10.0 2 -0. -5. 0 -4 .0 .0 -30 0 2. - .6 Swp Min 4GHz -1.0 -0.8 -0 FREQ (GHz) 4.0 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 5.0 5.1 5.2 5.3 5.4 5.5 -20 -3 - 4 0. --- S11 --MAG ANG 0.746 3.87 0.702 -12.85 0.648 -32.72 0.592 -56.68 0.54 -84.5 0.513 -114.65 0.507 -145.16 0.525 -174.09 0.555 161.21 0.592 139.36 0.614 119.6 0.629 100.93 0.642 83.03 0.646 65.36 0.643 47.31 0.635 28.7 --- S21 --MAG ANG 2.188 174.37 2.46 159.41 2.728 142.86 2.984 124.95 3.166 106.51 3.274 87.23 3.3 68.35 3.269 49.83 3.155 32.31 3.034 15.48 2.911 -0.65 2.784 -16.08 2.685 -31.48 2.574 -46.6 2.498 -62.2 2.394 -77.25 4 4.5 5 5.5 Frequency (GHz) --- S12 --MAG ANG 0.0331 128.97 0.0402 110.29 0.0469 91.51 0.0529 73.93 0.0589 51.54 0.064 31.7 0.066 11.24 0.068 -9.18 0.0683 -26.7 0.068 -44.52 0.067 -59.98 0.066 -76.99 0.066 -93.09 0.066 -108.81 0.065 -123.52 0.062 -138.54 --- S22 --MAG ANG 0.5264 7.77 0.4961 -6.7 0.471 -23.1 0.449 -41.93 0.426 -62.11 0.415 -83.8 0.404 -104.74 0.404 -124.18 0.395 -143.18 0.389 -159.55 0.391 -175.53 0.388 170.32 0.387 156.69 0.384 143.89 0.384 129.44 0.381 116.51 DISCLAIMER EXCELICS SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. EXCELICS DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN. LIFE SUPPORT POLICY EXCELICS SEMICONDUCTOR PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF EXCELICS SEMICONDUCTOR, INC. AS HERE IN: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness Specifications are subject to change without notice. Excelics Semiconductor, Inc. 310 De Guigne Drive, Sunnyvale, CA 94085 Phone: 408-737-1711 Fax: 408-737-1868 Web: www.excelics.com page 2 of 2 Revised October 2007